• Journal of Korea Water Resources Association
• /
• v.31 no.3
• /
• pp.309-315
• /
• 1998

The grid-based KIneMatic wave STOrm Runoff Model (KIMSTORM) was applied to YoncheonDam watershed (1,875km2) located in the Imjin river basin of the Korea. Six maps which are DEM(Digital Elevation Model), stream, flow path, soil, land use and Thiessen network, were used for input data. The simulated streamflows resulting from two selected storm events agreed well with the observed flows at the watershed outlet. The results of temporal variations and spatial distributions are presented by using GRASS. Keyword : grid-based, storm-runoff model, GRASS-GIS, Yoncheon dam watershed.

• Journal of Korea Water Resources Association
• /
• v.49 no.6
• /
• pp.459-467
• /
• 2016

LISFLOOD-FP model in which channel flows are resolved separately from the floodplain flows using either a kinematic or diffusive wave approximation has been used to analyze flooding behavior on the lower Mankyung River influenced by backwater. A calibration and validation process was applied using the previous flood events to assess the model performance. Sensitivity analysis was conducted for main calibrated parameters, such as Manning roughness coefficient and downstream boundary condition. Also, we examined the effect of warm-up for the initial conditions. The results show that the computed hydrograph is in good agreement with measured data on the study reach, even though it was a hydrologic kinematic wave model. The sensitive analysis show that the difference between the computed results may be greater depending on the used calibrated parameters and that the sufficient calibration/validation process against various flood events is necessary. If the flood inundation simulation is performed using the validated model, it is expected to be able to contribute about river planning and policy decision-making for flood damage reduction.

• Water for future
• /
• v.28 no.6
• /
• pp.119-131
• /
• 1995

Two-dimensional diffusion and kinematic hydrodynamic models have been studied for preparing the flood inundation map. The models have been tested by applying to one-dimensional dam-break problem. The results have good agreements compared with those of dynamic wave model. The diffusion wave model produces the mass conservation error close to zero. Floodwave analyses for two-dimensional floodplain with obstruction and channel-floodplain show both stable and efficient results. The model presented in this study can be used for flood inundation map and flood warning system.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.2
• /
• pp.585-594
• /
• 2013

In this study, laboratory experiments and numerical simulations were conducted to test the performance of resonance power buoy system proposed by Kweon et al.(2010). The system is composed of a linear generator and a mooring buoy. The mover of the linear generator mainly has heave motion driven by vertical oscillation of the buoy. In this system, the velocity discrepancy between the mover and the buoy makes electricity. However, ocean wave energy as a natural resource around Korean peninsula is comparatively small and the driving force for producing electricity is not enough for commercialization. Therefore, it is necessary that the buoy motion be amplified by using resonance characteristics. In order to verify the resonance effects on the test power buoy, the experimental investigations were conducted in the large wave flume (length of 110 m, width of 8 m, maximum depth of 6 m) equipped with regular and random plunger wave generator. The resonance draft of test power buoy is designed for the corresponding period of incident wave, 1.96 sec. Regular wave test results show that the heave response amplitude operator(RAO) by a test buoy has the amplification of 5.66 times higher compared to the wave amplitude at the resonance period. Test results of random waves show that the buoy has the largest spectrum area of 20.73 times higher at the point of not the resonance period but the shorter one of 1.85 sec. Therefore this study suggests the resonance power buoy for wave power generation for commercial application in the case of the coastal and oceanic area with smaller wave energy.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.7 no.4
• /
• pp.313-320
• /
• 1995

A numerical analysis on the wave deformation in the shallow water region is performed for the case of two intersecting wave trains of the same frequency on uniformly sloping beaches. This model is based on the consideration of wave energy balance and wave action conservation, and iteratively solved the set of conservation equations of both mass and horizontal momentum. Using the computed results, the wave deformations in accordance with the variation of the parameters luck as incident wave angie and wave height in deep water which influences the variation of wave hight and mean water level under the intersecting wave trains in the shallow water region. are considered.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.299-299
• /
• 2016

미농무성에서 개발된 유역수문모형 SWAT을 국내유역에 적용할 경우 일반적으로 일단위 유출 수문곡선의 첨두부가 관측치에 비해 과소하게 모의되는 경향이 있다. 본 연구에서는 이러한 원인에 대해서 고찰하고, 첨두부가 작게 모의되는 문제를 해결하기 위해서 지표유출의 지체와 관련된 서브루틴을 개선하였다. SWAT 모형에서는 지표유출의 지체는 운동파 집중시간(kinematic wave time of concentration)을 변수로 하는 지수형 감쇠함수를 사용하고 있다. 그러나 집중시간 계산식에서 지표유출에 기여하는 초과우량을 6.35mm/hr로 작은 고정값으로 가정하고 있어 큰 호우가 발생한 경우에도 집중시간이 길게 계산되는 구조를 가지고 있다. 이로 인해 지표유출의 지체 효과가 커서 첨두유량이 과소하게 산정되는 문제가 발생한다. 따라서 본 연구에서는 집중시간 계산시 고정값 6.35mm/hr 대신에 일 단위로 모의된 지표유출 발생량이 입력되도록 알고리즘을 수정하였다. 이 방법은 지표유출량의 크기에 따라 집중시간을 가변적으로 산정되게 함으로써 수문곡선의 첨두부를 보다 유연하게 구현할 수 있는 장점이 있다. 모형의 개선 효과를 평가하기 위해서 충주댐 상류유역을 대상으로 개선 전, 후의 일 단위 유출수문곡선의 첨두부를 비교하였으며, 그 결과 큰 홍수가 발생한 기간의 첨두유량이 10 % 이상 증가하는 것으로 분석되었다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6B
• /
• pp.697-707
• /
• 2008

The grid-based KIneMatic wave STOrm Runoff Model (KIMSTORM) by Kim (1998) predicts the temporal variation and spatial distribution of overland flow, subsurface flow and stream flow in a watershed. The model programmed with C++ language on Unix operating system adopts single flowpath algorithm for water balance simulation of flow at each grid element. In this study, we attempted to improve the model by converting the code into FORTRAN 90 on MS Windows operating system and named as ModKIMSTORM. The improved functions are the addition of GAML (Green-Ampt & Mein-Larson) infiltration model, control of paddy runoff rate by flow depth and Manning's roughness coefficient, addition of baseflow layer, treatment of both spatial and point rainfall data, development of the pre- and post-processor, and development of automatic model evaluation function using five evaluation criteria (Pearson's coefficient of determination, Nash and Sutcliffe model efficiency, the deviation of runoff volume, relative error of the peak runoff rate, and absolute error of the time to peak runoff). The modified model adopts Shell Sort algorithm to enhance the computational performance. Input data formats are accepted as raster and MS Excel, and model outputs viz. soil moisture, discharge, flow depth and velocity are generated as BSQ, ASCII grid, binary grid and raster formats.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.949-949
• /
• 2012

유출수문곡선은 강우량, 강우강도, 강우지속시간, 강우이동방향 및 이동속도와 같은 강우발생특성과 강수대의 공간적 이류방향과 유역형상과의 상호작용에 의하여 영향을 받으며, 특히 강우의 이류과정에서 나타나는 시간적, 공간적인 분포는 유출에 영향을 미치는 중요한 인자이다. 일반적으로 유출해석 기본이론은 연속방정식과 운동방정식으로서 운동파가정(kinematic wave analogy)을 기반으로 한 집중수문모형(lumped hydrologic model)에 의하여 수행되고 있지만 집중형 모형은 한 매개변수에 여러 가지의 물리적 과정을 개념화하여 담고 있기 때문에 유출과정에 대한 섬세한 모형화의 제약으로 인하여 강우의 이류과정에 따른 유출변화특성을 모의하기가 어렵다. 본 연구에서는 완전 분포형 수문동력학적 강우-유출 모형을 사용하여 강우의 이류특성을 반영할 수 있는 유출 모델을 구성하고, 강우의 이류특성에 따른 유역 출구에서의 유출수문곡선의 변화과정을 살펴보고 상관관계를 분석하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.257-257
• /
• 2011

현업에서 사용하는 유출해석 기본이론은 연속방정식과 운동방정식으로서 운동파가정(kinematic wave analogy)을 기반으로 한 집중수문모형(lumped hydrologic model)에 의하여 수행되고 있지만 집중형 모형은 한 매개변수에 여러 가지의 물리적 과정을 개념화하여 담고 있기 때문에 유출과정에 대한 섬세한 모형화의 제약으로 인하여 유역고유의 매개변수값을 찾기가 쉽지 않은 단점을 가지고 있다. 이에 본 연구에서는 물리적 기반의 2차원 분포형 강우-유출모형을 개발하고자 하며 이는 완전분포형 수문동역학적 모형으로 지표흐름과 침투과정, 기저유출과 관련된 과정을 모의한다. 본 모형은 공간적으로 변화하는 침투량과 소규모 및 대규모의 지형학적 특성을 사용하는 St. Venant 방정식을 사용하고 개발될 모형은 모든 스케일에서의 수심과 유량을 계산할 수 있으며 Richard 방정식(또는 선택적으로 Green-Ampt 방정식 채택)을 이용하여 정밀한 침투량 모의가 가능하다. 또한 레이다등의 고해상도 강우관측자료를 지점자료와 합성하여 입력자료로 사용할 수 있도록하고자 하며 강우-유출모형에 다목적댐이나 보등에서의 유량조절효과를 반영하고, 다목적댐군에서의 연계운영모의가 가능케 함으로서 현업의 운영자들이 실무에서 실질적으로 활용할 수 있는 형태의 모형을 개발하고자 한다. 이는 국내에서의 2차원 분포형 강우-유출모형을 자체 개발함으로서 연구역량을 제고하고, 국내 현업기관에서의 분포형 모형기반의 홍수모니터링 및 전망시스템의 확산에 기여할 것으로 예상된다.

• Journal of Korea Water Resources Association
• /
• v.38 no.7 s.156
• /
• pp.555-564
• /
• 2005

In this study, a simple rainfall-runoff model was proposed by using the hydraulic routing model that requires relatively few parameters. The parameters of this model were estimated by the watershed characteristics data, and were applied to the Soyang watershed and Ui stream watershed by using the kinematic wave for overland flow and dynamic wave routing for channel routing. In order to demonstrate validity, the proposed approach was compared to the HEC-1 model for the Soyang watershed. As the results of modeling have shown, the hydraulic model shows reasonable results similar to that of the HEC-1 model. This model also represents good results for the Ui stream watershed. Hence, even if this model is a simple rainfall-runoff model using general methodology, it is competitive to the natural watershed. However, it is still difficult to estimate the roughness coefficient and the catchment width, and therefore this model is in need of such supplements.