• Current Industrial and Technological Trends in Aerospace
• /
• v.6 no.2
• /
• pp.60-68
• /
• 2008

The characteristic and properties of materials are rapidly degraded when subjected to the synergistic effects of the space environment such as atomic oxygen, radiation, vacuum and thermal cycling. In order to understand the mechanism of material property variation in space environment and to develop new space materials applicable to the future space program, advanced space organizations such as NASA, ESA and JAXA have been continuing many researches on material test specimens used on ISSE(International Space Station Experiment) or LDEF(Long Duration Exposure Facility). In this paper, the selection requirements and verification trend of materials in space applications

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2011.04a
• /
• pp.41-46
• /
• 2011

과학기술의 발전으로 세계 각국의 경쟁은 지상을 넘어 우주로 나아가고 있다. 현재 미국을 비롯한 세계 우주기술 선진국들은 달 및 행성탐사 우주선 개발과 같은 유인 우주기술 개발에 박차를 가하고 있다. 따라서 미국, 러시아, 유럽연합(독일, 프랑스 등 11개국), 캐나다, 일본을 중심으로 운영되고 있는 우주정거장은 유인 우주행성탐사 시 생명체 유지에 필요한 시스템 개발과 검증을 위한 기초/응용과학 실험실로 활용되고 있다. 특히 우주환경에서 화재의 발생과 감지/소화의 메카니즘을 이해하고자 다양한 연소실험이 이루어지고 있다. 본 논문에서는 가장 기본적인 우주환경인 미세중력환경에서의 화염의 점화 및 형상특성을 고찰해보고 우주환경 화재안전에 관한 일반적인 내용을 기술하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.7
• /
• pp.635-640
• /
• 2015

In this paper, we report a non-explosive separation device for a small satellite which utilize a shape memory alloy actuator. Based on previous research, we try to increase the reliability of the proposed device by changing some components. It enables the proposed device to activate under high preload. Also, we confirm it generates low shock which is main advantage of non-explosive separation device. Finally, vibration test which mimics launching environment and thermal vacuum test which mimics space environment are carried out respectively. After each environment test, we confirm the proposed device is successfully activated. Conclusively, we develop a non-explosive separation device which can activate with low shock under high preload after shock and environment tests(vibration and thermal vacuum tests).

• Bulletin of the Korean Space Science Society
• /
• 2004.04a
• /
• pp.48-48
• /
• 2004

국제우주정거장 (International Space Station; ISS) 프로그램을 통하여 미국을 비롯한 15개 참여 국가들은 우주공간의 과학 연구 및 산업적 활용을 위한 전초기지를 만들어 나가고 있다. ISS에는 미세중력 (Microgravity) 환경을 이용하여 각종 실험을 수행하기 위한 공간으로 총 6개의 가압모듈 (Pressurized Module; PM)이 설치되었거나 설치될 예정이다. 현재 설치되어 있는 PM으로는 2001년 2월 ISS에 부착된 미국 NASA의 Destiny 실험모듈이 있으며, 향후 미국의 Centrifuge Accommodation Module (CAM), 일본의 Japanese Experiment Module- Pressurized Module (JEM-PM), 유럽연합의 Columbus Module, 러시아의 Research Module 등이 설치될 예정이다. (중략)

• Bulletin of the Korean Space Science Society
• /
• 2011.04a
• /
• pp.23.3-23.3
• /
• 2011

이 논문은 인공위성에 장착되어 우주의 궤도상에서 운용되는 대형 반사경의 파면오차 측정과 해석 방법에 대해 실례를 통한 비교 연구 결과를 보여준다. 일반적으로 적용하는 측정방법인 간섭계를 이용한 측정 방법과 파면측정기를 통한 측정방법을 비교하였으며, 반사경 측정을 위한 보조 광학계 및 측정 환경에 의한 영향, 그리고 실제 반사경이 운용될 우주환경 조건에서의 실험과 해석방법 등에 대해 기술한다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.827-829
• /
• 2011

Vacuum facility is required for high altitude space environment test to develop satellites or space launch vehicles. We, at Chungnam, National University, developed turbo molecular pump vacuum test facility up to $1.0{\times}10-6$ torr to simulate 200 km altitude environment. In this paper, we present some preliminary vacuum performance test results.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.10
• /
• pp.21-26
• /
• 2003

In this research, the change of coefficient of thermal expansion (CTE) of graphite/epoxy composite laminate under space environment was measured using fiber optic sensors. Two fiber Bragg grating (FBG) sensors have been adopted for the simultaneous measurement of thermal strain and temperature. Low Earth Orbit (LEO) conditions with high vacuum, ultraviolet and thermal cycling environments were simulated in a thermal vacuum chamber. As a pre-test, a FBG temperature sensor was calibrated and a FBG strain sensor was verified through the comparison with the electric strain gauge (ESG) attached on an aluminun specimen at high and low temperature respectively. The change of the CTE in a composite laminate exposed to space environment was measured for intervals of aging cycles in real time. As a whole, there was no abrupt change of the CTE after 1000 aging cycles. After aging, however, the CTE decreased a Little all over the test temperature range. These changes are caused by outgassing, moisture desorption, matrix cracking etc.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.49-52
• /
• 2007

Vacuum facility is required for high altitude space environment test to develop small thruster. We, at Chungnam National University, developed vacuum test facility up to $10^{-5}$ torr to simulate $100{\sim}120km$ altitude environment. Prior to operation, we predict vacuum pump performances and present preliminary calculation and experiments.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.5
• /
• pp.428-437
• /
• 2008

e-AIRS, an abbreviation of ‘e-Aerospace Integrated Research System’, is a virtual organization designed to support the aerospace engineering processes in the e-Science environment. As the first step toward a virtual aerospace engineering organization, the e-AIRS intends to give a full support to aerodynamic research processes. Currently, the e-AIRS can handle both the computational and experimental aerodynamic researches on the e-Science infrastructure. In detail, users can conduct the full CFD(Computational Fluid Dynamics) research processes, request wind tunnel experiments, perform the comparative analysis between computational and experimental resultants and finally collaborate with other researchers using the web portal. The current paper will describe those functions and the internal architecture of the e-AIRS system.

• Journal of Aerospace System Engineering
• /
• v.13 no.4
• /
• pp.26-36
• /
• 2019

The precise alignment between optical components is required in high-resolution earth observation satellites. However, the misalignment of optical components occurs due to external factors such as severe satellite launch environment and space environment. A satellite optical system with a focus mechanism is required to compensate for the image quality degraded by these misalignments. This study designed, fabricated, aligned precisely, and carried out a performance tests for the image quality of the system. The satellite optical camera performance tests were carried out to check the image quality change by operating the focus mechanism and to analyze the satellite optical system MTF by photographing USAF target using the autocollimator. According to the experimental results, the misalignments can be compensated sufficiently with the focus mechanism. Finally the basic data for re-focusing algorithm of the optical system was obtained through this study.