• Journal of the Korean Chemical Society
• /
• v.54 no.3
• /
• pp.269-274
• /
• 2010

The solubility and the physicochemical property (refractive index) in the NaCl-$CaCl_2$-$H_2O$ and KCl-$CaCl_2$-$H_2O$ systems were determined at $50^{\circ}C$ and the phase diagrams and the diagrams of physicochemical property vs composition were plotted. One invariant point, two univariant curves, and two crystallization zones, corresponding to sodium Chloride (or potassium chloride), dihydrate ($CaCl_2{\cdot}2H_2O$) showed up in the phase diagrams of the ternary systems. The mixing parameters ${\theta}_{M,Ca}$ and ${\Psi}_{M,Ca,Cl}$ (M = Na or K) and equilibrium constant $K_{sp}$ were evaluated in NaCl-$CaCl_2-H_2O$ and KCl-$CaCl_2-H_2O$ systems by least-squares optimization procedure, in which the single-salt Pitzer parameters of NaCl, KCl and $CaCl_2$ ${\beta}^{(0)}$, ${\beta}^{(1)}$, ${\beta}^{(2)}$ and $C^{\Phi}$ were directly calculated from the literature. The results obtained were in good agreement with the experimental data.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.05a
• /
• pp.14-17
• /
• 2008

A poppet type shutoff valve under the pneumatic control has been adapted for the MOV (Main Oxidizer shutoff Valve) for KSLV (Korea Space Launch Vehicle). The MOV controls the supply of liquid oxygen into the combustion chamber just by opening and shutting operations. The poppet part of the poppet valves is usually connected with the piston, but on the other hand that of the MOV is separated and just contacted with the piston in order to secure the flexibility of the valve design. For the prevention of the collision with valve body by an undesirable movement of the piston part, it is necessary to evaluate the force during the valve closing. The analysis of the force balance of the MOV at the moment of the valve closing have been performed and some important design parameters for the force balance control have been introduced.

• Korean Chemical Engineering Research
• /
• v.44 no.6
• /
• pp.623-630
• /
• 2006

The slag viscosity is an important factor determining the operation temperature of entrained flow type of gasifiers. The temperature of critical viscosity, $T_{cv}$, for 5 crystalline slags was predicted by empirical models and FactSage equilibrium calculations, and the validity of each method was tested. Two empirical models were employed: one using $T_h$ from the ash fusion test, and the other using the concentrations of 5 major components. The first model using $T_h$ over-predicted $T_{cv}$ by $20{\sim}100^{\circ}C$, while the model based on the slag composition under-predicted $T_{cv}$ by $80{\sim}120^{\circ}C$. In the equlibrium calculations, $T_{cv}$ was obtained from the liquidus temperature. When the 4-major component concentrations were used in the calculation, the predicted temperatures were higher than the observed. The liquidus temperature was very sensitive to the concentrations of minor components, and the addition of MgO and $Na_2O$ lowered the liquidus temperature. The results with 4 major and 3 minor components most closely described experimentally observed $T_{cv}$. In the case that a chromia refractory was used, it was shown that $Cr_2O_3$ concentration in the slag also needs to be included for more accurate prediction of $T_{cv}$.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.4
• /
• pp.5-11
• /
• 2004

생체 시스템은 수많은 세포들로 구성되어 있다. 일반적으로 세포막은 단백질과 지방의 혼합체로 구성되어 있으며 두께는 7.5-10nm 정도이다. 단백질은 지방과 함께 세포막을 통한 물질의 이동을 제어하는 역할을 한다. 특히 지방층은 지방에 잘 용해되는 산소나 탄산가스 등은 잘 통과시키지만, 지방에 잘 용해되지 않는 나트륨, 칼륨, 칼슘, 글루코스, 아미노산 등은 지방층 내부에 삽입되어 있는 단백질에 의해 조절된다.(중략)

• Journal of Korea Soil Environment Society
• /
• v.4 no.3
• /
• pp.17-24
• /
• 1999

The effects of hydrophobic chain length and its structure of nonionic surfactants on surfactant adsorption and contaminated diesel removal were studied in kaolin soil. Hydrocarbon chain length and double bond in hydrophobic tail group of nonionic surfactants affected surfactant adsorption and diesel removal efficiency from kaolin soil. The degrees of surfactant adsorption and diesel removal were closely related each other. Among nonionic surfactants we studied, surfactants with shorter hydrophobic chain length and higher HLB value showed lower degree of adsorption and higher efficiency of diesel removal. The existence of unsaturated carbons in the structure of hydrophobic chain enhanced diesel removal by reducing surfactant adsorption to kaolin soil. The best diesel removal was obtained after adsorption saturation was reached. If surfactant concentration was higher than a critical value, diesel removal was reduced probably because of precipitation. liquid crystal formation, or coacervation of surfactants at high concentration.

• Applied Chemistry for Engineering
• /
• v.5 no.1
• /
• pp.127-138
• /
• 1994

In the process of pervaporation separation for aqueous ethanol solution through cellulose tai-acetate(CTA) membrane, the modelling on the solution-diffusion permeation mechanism was built up on the basis of sorption and permeation experimental results. Also its function type and parameter were examined. The composition of sorption equilibrium in three component system(Ethanol/Water/CTA) were compared with the calculated value by Flory-Huggins' equation using the pure component sorption data. In order to apply the thermodynamic equilibrium relationship between the membrane free composition in the membrane and the equilibrium composition in the liquid phase, the apparent activity this system, however, the results were not satisfied. Diffusion equations were expressed with the concentration gradient considering permeate alone, and a concentration-dependent diffusion coefficient which includes a parameter was used. And this model was fitted with the measured permeation rates. If the permeation rate and the amount of sorption of one component were much larger than those of the other, the bulk flow term could not be negligible. The flux and selectivity were increased with increasing temperature, and with decreasing downstream pressure.

• Resources Recycling
• /
• v.19 no.2
• /
• pp.28-34
• /
• 2010

In this study, cow tibial from cow bone, a kind of beef waste, sintered at $800\sim850^{\circ}C$ for three hours was used to measure its removal capacity for metal ions such as Pb, Cd and Zn in a single and a multi-component equilibrium systems. The sorption equilibrium data were analyzed as measured by the effect of media on lead, cadmium and zinc sorption. This analysis shows that the sorption of metal ions for multi-component systems applying IAST can be predicted more reasonably by the Freundlich and the Sips theory than the Langmuir.

• Aerospace Engineering and Technology
• /
• v.11 no.1
• /
• pp.84-90
• /
• 2012

Fuel shutoff valve of a combustion chamber controls propellant mass flowrate of a rocket engine, by using pilot pressure and spring force. The developing fuel shutoff valve can be self sustained even though pilot pressure is removed in an actuator. Therefore, it is necessary to analyze the characteristics of the forces with respect to the opening and closing of the valve in order to evaluate its performance. In light of this, the valve has been designed to adjust the control pressure for the opening of the poppet and to determine the working fluid pressure at which the valve starts to close. This paper also has been predicted flow coefficient of the valve by Fluent(ver. 12.0) CFD analysis. Various results from the prediction and the analysis have been compared with experiments.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.67.1-67.1
• /
• 2017

구리는 탄성이방성이 큰 재료로 Si 박막상에 성장시키면 (111) 방향으로 우선 배향된 박막을 얻을 수 있다. 본 연구는 이러한 (111) 우선 방위를 갖는 Cu 박막의 전기도금층의 재결정 후의 매우 평탄한 표면을 갖는 박막에서 에칭에 따른 박막의 단차와 표면형상을 통해 결정방위별 에칭 특성을 비교 분석한 결과이다. 10 vol% 질산용액에서 에칭한 결과는 구리의 용해에 따라 각 결정면에 대한 고유의 facetted surface morphology를 나타내며, 대표적인 결정 방위인 (111), (110), (100)에 대해 triangular flake, ridge and rectangular pyramidal shapes을 나타내는 것을 알 수 있었다. 에칭속도의 정량적 측정을 위해 120초간 2.2M 농도의 질산용액으로 에칭을 실시하였고, nanosize의 as-plated initial region, (111), (110), (100) oriented regions의 각각에서 383, 270, 276, 317 nm/min의 에칭속도를 갖는 것을 확인하였다. Facet surface의 관찰을 통해 에칭반응이 (111) front surface를 갖는 열역학적 평형상태에서 일어나며, 이러한 결정방위별 에칭속도 차이는 각 결정S면이 갖는 Kink or ledge의 밀도의 차이에 기인할 것으로 판단된다. 즉, 에칭이 평형상태에서 step flow mechanism에 의해 열역학적 평형상태를 유지하면서 진행이 된다. 본 연구는 향후 다양한 에칭관련 용액 효과, 구리 박막의 응력 및 불순물에 의한 효과를 볼 수 있는 기본 방법을 제공해 줄 것으로 기대한다.

• Journal of Biosystems Engineering
• /
• v.29 no.3
• /
• pp.243-250
• /
• 2004

본 연구에서는 국내 미곡도정공장의 도정기계 작동상태와 가공된 발 품질의 원격감시를 위해서 인터넷기반 감시시스템을 개발하고자 하였다. 인터넷 감시시스템은 Laboratory Virtual Instrument Engineering Workbench(Lab VIEW)를 이용하여 개발되었으며 Hypertext Transfer Protocol(HTTP)을 제공할 수 있는 중앙서버, 현장제어용 Programmable logic controller (PLC) 및 각종 센서 등으로 구성되었다. 비상상태를 대비하기 위하여 도정기계를 원격으로 제어(ON/OFF)할 수 있도록 제어알고리즘을 설계하였다. 개발된 인터넷기반 감시시스템은 미곡 도정공장에 설치한 모든 도정기계의 작동상태, 백미 탱크내의 백미 무게와 백미의 온도 및 평형상대습도를 실시간으로 감시할 수 있었으며, 원격으로 측정한 백미탱크내의 평형온도 및 평형상대습도를 이용하여 백미의 함수율도 예측할 수 있었다. 거리 및 인터넷속도에 의해 발생된 시간지연의 측정과 원격으로 수집된 자료의 검증을 통해 인터넷 감시시스템의 성능을 평가하였다. 인터넷상의 시간지연(서울-광주간)은 약 1.2$\pm$0.2s 이었다.