• Journal of the Society of Disaster Information
• /
• 제11권1호
• /
• pp.1-8
• /
• 2015

This paper presents finite element (FE) analyses to clarify the effects of external pressure on the residual stresses in a girth-welded steel pipe. At first, FE simulation of the girth welding process is carried out to obtain the weld-induced residual stresses employing sequentially coupled three-dimensional (3-D) thermo-mechanical FE formulation. Then, 3-D elastic-plastic FE analyses incorporating the residual stresses and plastic strains obtained from the preceding FE simulation are performed to investigate the residual stress behavior in the girth-welded pipe under external pressure. The FE analysis results show that the hoop compressive stresses induced by the external pressure significantly alter the hoop residual stresses in the course of the mechanical loading.

• Journal of Korean Society of Steel Construction
• /
• 제16권1호통권68호
• /
• pp.43-49
• /
• 2004

With building structures becoming higher and having longer spans, new structural steel with better strength, thicker plate, and performance may be required rather than conventional structural steel. TMC steel is widely used in building structures largely due to its excellent seismic performance, superior weldability, and design strength that is not affected by plate thickness. To make use of TMC steel in pipe structures with large diameter and heavy wall, however, the this study, the degradation of material properties in submerged are welded SM520TMC steel pipes and tubes was evaluated using variable fabrication process and material change. Degradation test results showed that the yield and ultimate strength increased and elongation decreased regardless of the mode of fabrication, i.e., through roll bending or press forming, or steel used, i.e., domestic SM520TMC steel or SM520TMC steel from Japan.

• Journal of the Korea institute for structural maintenance and inspection
• /
• 제12권1호
• /
• pp.183-192
• /
• 2008

Generally, application of steel pipe pile as deep foundation member needs special requirement for the connection method between steel pipe pile and concrete footing. Even though two types of connection method are suggested in the korea highway bridge code, type-B method is prevalent. In this study, vertical, lateral, and tension loading test are done for two types of type B connection to review stress concentration, formation and behavior of imaginary RC column in the footing. Welding type and hook type as the connection method are considered in this study. Test results show that welding type have the more reserve capacity than hook type and the specimens connected by the welding type behave as the imaginary RC column in the footing. However, the specimens connected by the hook type did not behave as the imaginary RC column in the footing but behave as the hinge.

• Transactions of the Korean Society of Mechanical Engineers
• /
• 제7권2호
• /
• pp.226-232
• /
• 1983

회전수를 용접변수로 했을 때 이종강봉 및 이종강관의 마찰용접에 있어서 소성변형중에 발생한 AE(acoustic emission)량과 용접후의 냉각중에 발생한 AE량의 총량을 측정해석하고, 용접표면상 에 0.635mmR의 반원 노치를 가공했을 때의 용접부 인장강도를 구하여, AE총량과 용접부강도와 의 상관관계실험식 모델을 만들었고, 이들과 관계계산식과의 비교 조사와 95%신뢰성을 검증하였 고, 이종강의 마찰용접 중에 용접강도와 품질을 검토관리할 수 있는 기본자료가 되게 하였다.

• 월간 기계설비
• /
• 통권127호
• /
• pp.54-60
• /
• 2001

• Proceedings of the KWS Conference
• /
• 대한용접접합학회 1990년도 특별강연 및 추계학술발표 개요집
• /
• pp.102-105
• /
• 1990

• Proceedings of the KWS Conference
• /
• 대한용접접합학회 2007년 추계학술발표대회 개요집
• /
• pp.313-315
• /
• 2007

• Proceedings of the KWS Conference
• /
• 대한용접접합학회 2009년 추계학술발표대회
• /
• pp.82-82
• /
• 2009

Although leakage at a low carbon steel pipe made by electrical resistance welding(ERW) was reported due to grooving corrosion, the cause for the corrosion has not yet been cleared. So lots of researches were carried out already about grooving corrosion mechanism of ERW carbon steel pipe but there is seldom study for water hammer happened by fluid phenomenon and corrosion rate by flow velocity. In this study, the corrosion test carried out using the ERW carbon steel pipe by changed the water speed and heat input in a month. The level of dissolved oxygen is maintained 5~5.5mg/l(amount of dissolved oxygen in tap water). The water speed for corrosion test is 1m/s, 2m/s, 3m/s. As the results, grooving corrosion rate is increased cause by water speed in the pipe. In the case of the ERW pipe with more heat input, grooving corrosion rate is decreased. It is therefore that welding heat input should be controlled based on the carbon content of the pipe in order to improve the corrosion reistance of the ERW pipe.

• ICROS
• /
• 제2권6호
• /
• pp.38-49
• /
• 1996

본 논문에서는 시각 인식 기술을 이용한 자동화된 생산기술 분야로, 전자회로 기판 생산 공정과 용접 공정을 예롤 들었으며, 각 분야에서의 연구 동기 및 현황을 소개하고 최근 사용되고 있는 기술에 대해 논하였다. 여기서, 전자회로 기판 생산공정에 적용된 시각 인식 기술로는 인쇄 회로 기판(PCB)의 도체 패턴의 양/불량 판정 검사, FIC부품의 인식 및 리드 검사, FIC부품의 장착상태검사, 장착 후의 납땜 검사 등을 다루었으며, 용접 공정에 대한 기술로는 맞대기 용접에서의 용접선 추적, 고주파 전기저항 용접으로 생산되는 강관의 용접품질 검사 등을 다루었다.

• Journal of Korean Society of Steel Construction
• /
• 제18권5호
• /
• pp.625-631
• /
• 2006

Residual stresses in structural materials are stresses that exist in the objective without the application of any service or other external loads. Manufacturing processes are the most common causes of residual stress. To examine the effect and the distribution of residual stress due to press forming and welding in the production of a 600MPa-class steel tube, a residual stress evaluation test was performed. The measurement used the Hole-Drilling Strain Gauge Method and evaluated the distribution of residual stress, which measured a total of 59 places near the welding line.