• The Korean Journal of Rheology
• /
• v.5 no.2
• /
• pp.136-143
• /
• 1993

PDSC(pressurized differential scanning calorimeter)를 이용하여 물 또는 물 -DMF(N,N-dimethylformamide) 혼합물을 함유한 아크릴로니크릴 중합체(wet-PAN)의 융점 거동을 조사하였으며 wet-PAN 용융체의 점도측정에 적합한 모세관형 점도계를 제작하여 전단속도 및 온도에 따른 점도변화를 고찰하였다. 물에 의한 wet-PAN의 융점 및 용융점도 는 물의 함량이 증가함에 따라 점근적으로 감소하여 25wt% 이상에서는 거의 일정하였다. 또한 물(25wt% 기준)의 일부를 DMF로 대체하였을 경우에는 융점이 감소하였다. 한편 wet-PAN의 용융점도는 power-law 거동에 준하였으며 물계에서는 power-law 지수(n)가 0.16(19$0^{\circ}C$)~0.18(17$0^{\circ}C$)인데 비하여 물(95)~DMF(5) 혼합물계에서는 0.24(175$^{\circ}C$)~0.25(16 5$^{\circ}C$)로서 점도의 전단담화거동이 약해졌으나 흐름의 활성화에너지는 다소 증가 하였다.

• Proceedings of the KSME Conference
• /
• 2000.11b
• /
• pp.130-135
• /
• 2000

To enhance heat transfer characteristics of water, fine ice was added to it. The convective heat transfer characteristics of the ice slurry were investigated in a flow loop with a constant heat flux test section. The Nusselt number and Fanning friction coefficient of water flow were found to be similar to the expected curve by Petukhov. The Nusselt number of the ice sin flow was higher than the Nusselt number of water. Effective thermal capacity of the 10.84% ice slurry was found to have 2.39 times of the thermal capacity of water.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.120.1-120.1
• /
• 2014

고온 plasma는 전자, 이온, 중성입자로 구성된 이온화된 기체로 국소열평형 상태의 구성입자가 수천도에서 수만도에 이르는 큰열용량을 갖는 불꽃형태를 이루고있다. 따라서 고온 plasma는 고온, 고열로 대상물질을 용융 또는 기화시켜 물질의 물리적상태를 변화시키는 열원역활을 하거나, 높은반응성을 갖는 입자들에 의한 화학반응을 촉진하는 반응촉매로 작용하여 고기능성 부품소재, 에너지 환경, 원자력, 항공우주,유가금속 재활용등의 분야에서 핵심적인 역활을 하고 있슴니다. 본 발표에서는 연구소에서 지금까지 국책과제로 수행되었던 고온 plasma을 유해폐기물(병원, 유독 액상폐기물, 군화공폐기물, 중금속 함유 폐기물, 폐 plastic 가스화 등)처리에 관한 전반적인기술을 소개하고져함.

• Journal of Welding and Joining
• /
• v.16 no.2
• /
• pp.40-47
• /
• 1998

In the present study, depressions of the GMA weld pool due to the impact of droplet are numerically investigated. The numerical simulation is conducted on the basis of the Navier-Stokes equation and the volume of fluid(VOF) functions. The kinetic energy of transferring droplet makes a depression of the weld pool surface. The surface active element affects the depression of the weld pool. The droplets transferred efficiently to the bottom of the weld pool, along with electromagnetic force make the finger shape penetration at the high current GMAW.

• Resources Recycling
• /
• v.13 no.4
• /
• pp.46-52
• /
• 2004

The present main research direction of waste treatment is the development of incineration system for low pollution. Also, heat value of waste is increased because of the rising of living standard, environmental consideration and collection of sorted waste for recycling. Therefore, many researches have been continued for solving ash problem including heavy metals, dioxin problem and high energy efficiency by use of high heat value. This study is described for the facilities of pyrolysis system, pyrolysis-melting system, pyrolysis-gasification melting system.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.268-277
• /
• 2004

process (ACP), electrochemical properties of high heat-generating alkali and alkali earth oxides in molten salt were measured and the behavior of those elements were analyzed. The reduction potentials of Cs, Sr, and Ba in a molten LiCl-$Li_2O$ system were more cathodic than that of Li and closely located one another. Thus, it is expected that the alkali and alkali earth would not hinder the reaction mechanism which is via lithium reduction. Alkali and alkali earth metals are likely to recycle into molten salt when the process is operated beyond metal reduction potentials and the effect of electric current on the mass transport is also determined by measuring the metal concentrations in the molten salt phase at different current conditions.

• Korean Chemical Engineering Research
• /
• v.50 no.6
• /
• pp.939-944
• /
• 2012

The electrochemical behavior of magnesium ions was examined by cyclic voltammetry in a molten $MgCl_2-CaCl_2$-NaCl salt. The reduction potential of magnesium ions was measured and those values were estimated with the variation of the concentration of $MgCl_2$ and the temperature of molten salts. The diffusion coefficient of the $Mg^{2+}$ ions has been determined at 660, 680, 700, 720 and $740^{\circ}C$. The values were $8.79{\times}10^{-6}$, $9.56{\times}10^{-6}$, $1.17{\times}10^{-5}$, $1.4{\times}10^{-5}$ and $1.77{\times}10^{-5}\;cm^2\;s^{-1}$. The activation energy for the diffusion processes of $Mg^{2+}$ ions was found to be $70.28\;kJ\;mol^{-1}$ by using the Arrhenius equation.

• Nuclear Engineering and Technology
• /
• v.28 no.2
• /
• pp.103-117
• /
• 1996

A mathematical model of vapor explosion propagation is presented. The model predict two-dimensional, transient flow fields and energies of the four fluid phases of melt drop, fragmented debris, liquid coolant and vapor coolant by solving a set of governing equations with the relevant constitutive relations. These relations include melt fragmentation, coolant-phase-change, and heat and momentum exchange models. To allow thermodynamic non-equilibrium between the coolant liquid and vapor, an equation of state for oater is uniquely formulated. A multiphase code, TRACER, has been developed based on this mathematical formulation. A set of base calculations for tin/water explosions show that the model predicts the explosion propagation speed and peak pressure in a reasonable degree although the quantitative agreement relies strongly on the parameters in the constitutive relations. A set of calculations for sensitivity studies on these parameters have identified the important initial conditions and relations. These are melt fragmentation rate, momentum exchange function, heat transfer function and coolant phase change model as well as local vapor fractions and fuel fractions.

• Polymer(Korea)
• /
• v.28 no.3
• /
• pp.225-231
• /
• 2004

High intensity ultrasound was irradiated to induce mechano-chemical degradation during melt processing of polycarbonate (PC) and styrene-co-acrylonitrile (SAN) in an intensive mixer. It was found that macroradicals of PC and SAM can be generated during ultrasound assisted melt processing; which, in turn, provides a useful route to achieve in-situ compatibilization for the blends of PC and SAM by their mutual coupling. Effectiveness of compatibilization was assessed by investigating phase morphology and mechanical properties of the blends. It was observed that domain size was reduced and the stability of morphology was well maintained even after annealing treatment of the blends. In audition, the enhancement of mechanical properties such as elongation at break and tensile strength was evident, which added further confirmation on the desirable feature that sonication of melt-blends is able to enhance intermolecular interaction by promoting chemical bonds between dissimilar polymers without use of any compatibilizers.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.1
• /
• pp.24-31
• /
• 2019

The current study demonstrates an efficient procedure to create ingots from $Al_2O_3$ powder using the skull melting method to use these ingots as a starting material in conventional methods for growing synthetic single-crystal sapphire. Dimension of the cold crucible was 24 cm in inner diameter and 30 cm in inner height, 15 kg of $Al_2O_3$ powder was completely melted within 1 h at an oscillation frequency of 2.75 MHz, maintained in the molten state for 3 h, and finally air-cooled. The areal density and components of the cooled ingot by parts were analyzed through scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDS). The areal density and $Al_2O_3$ content of the ingot were related to the temperature distribution inside the cold crucible during high-frequency induction heating, and the area with high temperature was high tends to be high in areal density and purity.