• Applied Chemistry for Engineering
• /
• v.7 no.2
• /
• pp.350-355
• /
• 1996

Poly(AA-co-EGDMA) microgels were prepared by precipitation polymerization in highly swollen polystyrene gel solution. The polymerization was carried out in selective solvent such as cyclohexane/acetone at $60^{\circ}C$. Poly(AA-co-EGDMA) microgels with various site of $0.18{\sim}0.55{\mu}m$ were obtained from different concentration of polystyrene(PS), concentration of crosslinking agent(EGDMA), ratio of Ps/monomer and volume ratio of solvents. The particle size of poly(AA-co-EGDMA) microgels decreased with increasing the concentration of PS and increased with that of EGDMA.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.214-214
• /
• 2003

제지산업에 경쟁력을 부여할 수 있는 방법의 일환으로 제지용 도공안료의 표면개질을 시도하였다 은(Ag)이 항균력이 있다는 것이 여러 사람에 의해 증명된바 있으므로 이 은의 항균력을 제지용 무기안료에 이산화티탄과 함께 표면개질하고 다기능성 복합 항균분체를 설계하였다. 표면개질장치에 설치한 기상분사장치를 통해 은 용액을 고압기상분사로 TiO$_2$입자 표면에 Coating 하였다 이때의 분무각도는 60$^{\circ}$이고 오리피스 직경은 0.6mm, 분사 압력은 14kgf/$\textrm{cm}^2$ 이다. TiO$_2$에 은 용액을 기상분사하여 코팅시킨 후 표면개질 계산식에 의한 배합비로 모입자(clay, CaCO$_3$, PE)와 자입자(TiO$_2$)를 혼합하였고, 분체의 대전현상을 이용하여 모입자 주위에 자입자를 부착시킨 후, 고속기류중 충격력으로 표면개질처리를 하였다 표면개질 장치를 사용하여 제지용 무기안료 표면에 은용액이 코팅된 TiO$_2$를 개질 시켰다. 각종 물성(항균성, 백색도, 산란도)과 XRD, SEM 측정을 통해 기능성 항균분체의 실용방안 가능성에 대하여 조사하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.480-480
• /
• 2013

태양에너지는 신재생 에너지 중에서 무한한 에너지원으로서 태양에너지에 대한 활발한 연구가 이루어지고 있다. 그 중에서도 결정형 실리콘 태양전지에 대해 다양한 연구가 진행 중이다. 이러한 실리콘 태양전의 제작은 실리콘 식각 용액을 이용하여 기판의 절삭 손상된 부분을 식각한 후 텍스쳐링(texturing) 공정을 통해 표면의 흡수율을 높이고, 반면에 반사율을 감소시킨다. 텍스쳐링 공정이 끝난 후 도핑 공정을 통해 에미터(emitter)를 형성, 반사방지막을 증착, 기판의 전면과 후면에 페이스트를 바르고 스크린인쇄법으로 전극을 형성한 후 마지막으로 형성된 전극을 소성 공정을 통해 전극이 에미터와 접촉하면 태양전지가 완성된다. 하지만 텍스쳐링 공정을 통해 만들어진 피라미드 구조는 도핑공정을 하게 되면, 꼭짓점 부분의 균일한 도핑이 이루어지지 않는다. 이러한 균일하지 않은 공정으로 인해 전극 소성 공정에서 일부의 에미터층을 뚫어버리게 되므로 누설전류가 증가하게 된다. 그래서 본 논문에서는, 변환 효율을 개선시키기 위해 표면 구조와 반사방지막의 열처리 공정에 대한 연구를 하였다. 우선 피라미드 구조를 균일하게 만들었으며, 반사방지막 형성 후 열처리를 하여 소수 캐리어 수명을 증가시켰으며, 누설전류를 감소하였다. 균일한 도핑 및 전극 형성을 용이하게 하는 부드러운 피라미드 구조를 형성하기 위해 HND (HF：HNO3 : D.I wafer=5 : 100 : 100) 용액을 사용하여 식각하였다. 그 결과 직렬저항은 NHD용액을 사용하여 300초 동안 식각하였을 때 $1.284{\Omega}$ 낮아지는 결과를 얻을 수 있었으며, 도핑을 균일화하여 누설전류를 감소시킬 수 있었다.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1998.11a
• /
• pp.60-63
• /
• 1998

본 연구에서는 유류 오염토양 복원을 위한 효율적인 세척공정을 구성하여 현장적용 가능성을 검토하였다. 토양세척공정은 co-current식 전세척장치와 counter -current식 세척조로 구성된다. 물이 주입되는 co-current식 전세척장치에서는 스크류 축의 회전력에 의한 토양 이송 및 스크류의 각 pitch 사이에 부착된 임펠러의 기계적 교반력에 의한 세척이 동시에 이루어진다. 전세척장치를 통과한 토양과 물은 세척조로 유입되어 세척용액과 반대방향으로 이동하게 된다. 세척조의 내벽에 부착된 나선형 웨어에 의해 적정 운전조건하에서 일정 크기를 기준으로 토양이 분리되며, 각 웨어 사이에 부착된 임펠러의 교반력에 의해 오염토양이 세척된다. 실험결과, 운전시 고려해야 할 주요 영향인자들은 전세척장치에서의 토양주입량은 1 kg/min, 진탕비는 1, 회전속도는 50 rpm에서 최대 세척효율(#4-, 83.6%)을 보였으며, 세척조에서는 토양.물 주입위치 15 cm, 회전속도 5 rpm, 경사각 6$^{\circ}$, 세척용액 주입유량이 0.8 L/min일 때 최대 세척효율인 97.9%(#4-)를 나타냈다.

• Korean Journal Plant Pathology
• /
• v.1 no.1
• /
• pp.61-66
• /
• 1985

Seventy-one strains collected from Korea were classified into three serovars (designated A, B-I and B-II) by using agar gel diffusion test with the antisera produced against Xanthomonas campestris pv. oryzae isolates Q7472 and Q7502. Of 71 isolates tested, 65 isolates belonged to serovar A, 5 isolates were serovar B-I, and one isolate was serovar B-II. The isolates of serovar B-I and B-II could be distinguished clearly from those of serovar A showing marked autoagglutination. Xanthomonas campestris pv. oryzae was serologically diagnosed in rice leaves by agar gel diffusion tests, possibly being distinguished from Xanthomonas campestris pv. olyzicola and E. herbicola. The pathogen could be also serologically detected from the extracts of diseased leaves, squeezed immediately, heated at $100^{\circ}C$ or incubated in PSA. Serological detection of Xanthomonas campestris pv. oryzae is a more reliable and less time-comsuming method.

• Membrane Journal
• /
• v.18 no.4
• /
• pp.306-316
• /
• 2008

The adsorption characteristics of L-tryptophan of PES-BSA affinity membranes prepared by using electro-spinning were investigated. It was found that the fiber diameters could be controlled by the comparisons of fiber diameters prepared by various spinning conditions through FESEM and Image Analyzer. Darcy's permeability constants, mechanical properties and hydrophobic properties were enhanced since micro-fibers increased by increasing the composition ratio of HFB and BSA. The elution capacity of L-tryptophan in borate-DMSO buffer solution was higher than that in tris-HCl buffer solution, while the elution capacity of A 7906 type BSA was higher than A 8022 type BSA. This is due to the characteristics of BSA type, i. e. higher purity and uniform molecular weight and better pH stability of A 7906 type BSA than those of A 8022 type BSA.

• Applied Chemistry for Engineering
• /
• v.18 no.1
• /
• pp.90-93
• /
• 2007

The effects of the host on the aggregation behavior of Oxaxine 720 (Ox720) were studied using absorption, fluorescence, and excitation spectra. The host materials used in this study were water, ethanol, and $TiO_2/P123$ nanocomposite. Ox720 aqueous solution contains a significant amount of H-aggregates, which increases with the increase in the concentration. In ethanol solution, Ox720 mainly exists in the monomer form and tiny amount of Ox720 exists in H- and J-aggregate forms. In the $TiO_2/P123$ nanocomposite thin film, the amount of H-aggregates was smaller than that in the aqueous solution but greater than that in the ethanol solution. $TiO_2$ nanocomposite thin film was proven to be a moderately good host for Ox720.

• Journal of the Korean Geotechnical Society
• /
• v.33 no.9
• /
• pp.23-34
• /
• 2017

In order to develop urban underground spaces, even microcracks should be reinforced. In this paper, the grouting injection performance for microcracks was investigated considering the viscosity and particle size of the grouting materials, injection pressure, and crack width. There are two types of typical grouting materials used for filling micro-cracks. One is a chemical liquid grouting material which is a solution type and the other is a cementitious grouting material which is a suspension type. The injection performance of the grouting materials for microcracks is generally influenced by the viscosity, and the injection performance of the cementitious grouting material is additionally affected by the particle size. From laboratory tests, the viscosity was calculated inversely to provide a suitable viscosity measurement method for each grouting material. The groutability ratio based on the relationship between the crack width and the particle size was evaluated to estimate the grouting feasibility of the cementitous grouting material through microcracks.

• Korean Chemical Engineering Research
• /
• v.43 no.4
• /
• pp.495-502
• /
• 2005

Copper was plated on the tungsten substrate by use of a direct copper electroless plating. The optimum deposition conditions were found to be with a concentration of $CuSO_4$ 7.615 g/L, EDTA of 10.258 g/L, and glyoxylic acid of 7 g/L, respectively. The solution temperature was maintained at $60^{\circ}C$. The pH was varied from 11.0 to 12.8. After the deposition, the properties of the copper film were investigated with X-ray diffractometer (XRD), Field emission secondary electron microscope (FESEM), Atomic force microscope (AFM), X-ray photoelectron spectroscope (XPS), and Rutherford backscattering spectroscope (RBS). The best deposition condition was founded to be the solution pH of 11.8. In the case of 10 min deposition at the pH of 11.8, the grain shape was spherical, Cu phase was pure without impurity peak ($Cu_2O$ peak), and the surface root mean square roughness was about 11 nm. The thickness of the film turned out to be 140 nm after deposition for 12 min and the deposition rate was found to be about 12 nm/min. Increase in pH induced a formation of $Cu_2O$ phase with a long rectangular grain shape. The pH control seems to play an important role for the orientation of Cu in electroless deposition. The deposited copper concentration was 99 atomic percent according to RBS. The resulting Cu/W film yielded a good adhesive strength, because Cu/W alloy forms during electroless deposition.

• Journal of the Korean Chemical Society
• /
• v.33 no.6
• /
• pp.588-595
• /
• 1989

Log K, ${\Delta}$H and ${\Delta}$S for the complexation of $La^{3+},\;Ce^{3+}$ and $Eu^{3+}$with various multidentate ligand containing crown ether, diaza crown ether and diamine ether have been determined in methanol and acetonitril solutions at $25^{\circ}C$ by solution calorimetric titration method. The greater stability constant of $La^{3+}$-15C5 than those of 18C6 diaza [2.2] in methanol are discussed in terms of the size of metal ion and the ligand cavity and of metal ion solvation. The stabilities of $Ce^{3+}$ and $La^{3+}$ ion complexes with a various multidentate ligand in acetonitril are in the order of (diamine ether)<18C6<15C5$Ce^{3+}$, $La^{3+}$ and $Eu^{3+}$-diaza [2.2] complexes in acetonitril are increased with the following order: $Eu^{3+}$ < $La^{3+}$ < $Ce^{3+}$, that is increasing order of the optimum size and of the charge density of metal ion.