• KSBB Journal
• /
• v.4 no.2
• /
• pp.150-156
• /
• 1989

The chaacterisitics of a commercial membrance-coverd electrode in air-saturated saline solution were investigated in terms of a steadystate one-dimensional model. The electrode system miiersed in an aqueous medium consists of three layers: an external concentration boundary layer, a membrance, and an inner electrolyte layer. The membrance can be permeabld to the water and impermeable to the ionic species. In stationary midium, the water migrates from the external medium to the inner electrolyte layer until a thermodynamic equilibrium is reached. In a following midium, however, there is a reverse direction of water movement due to the hyrodynamic pressure differential until both thickness of the electrolyte layer and the membrance are equal.

• The Korean Journal of Food And Nutrition
• /
• v.13 no.3
• /
• pp.242-248
• /
• 2000

수산물 가공시 흘러나오는 폐수 중에 함유되어 있는 수용성 단백질을 chitosan에 흡착시키기 위하여 albumin과 hemoglobin, albumin-myoglobin 혼합단백질을 이용하여 chitosan과의 흡착 및 chitosan 제조조건에 따른 흡착효과와 chitosan의 수용성 단백질 흡착에 미치는 인자를 살펴본 결과는 다음과 같다. Chitosan위 탈아세틸화 조건을 60, 70, 80%로 달리하여, albumin, hemoglobin, albumin-myoglobin 혼합용액에 적용했을때 chitosan의 탈아세틸화도가 높을수록 chitosan과 단백질 사이의 흡착률은 높게 나타났다. 초음파 처리에 의하여 chitosan의 분자량이 작을수록 chitosan과 단백질 사이의 흡착률은 높게 나타났다. pH변화에 따른 chitosan과 수용성 단백질의 흡착률은 albumin 및 albumin-myoglobin 혼합용액에서는 pH 4.0에서, hemoglobin용액에서는 pH 7.0에서 흡착률이 높게 나타났다 chitosan과 수용성단백질과의 흡착에서 반응시간은 albumin및 albumin-myoglobin 혼합용액에서는 4시간, hemoglobin용액에서는 3시간까지 흡착률이 증가하였고, 그 이후의 시간이 경화하여도 흡착률의 증가는 거의 보이지 않았다. 수용성 단백질 용액에 NaCl 농도를 0.1M에서 1.0M로 증가시켜 첨가했을때 염의 농도가 높을수록 chitosan과 단백질 사이의 흡착이 잘 일어나지 않았다.

• Korean Journal of Food Science and Technology
• /
• v.29 no.6
• /
• pp.1184-1190
• /
• 1997

Corn zein coated carrageenan films were manufactured by immersing preformed ${\kappa}-carrageenan$ films into solution of different concentrations of corn zein (CZ) solids (10, 20, and 30% in 95% ethyl alcohol) with polyethylene glycol (20% w/w of CZ), glycerol (24% w/w of CZ). For all types of films, water vapor permeability (WVP), water solubility (WS), swelling ratio (SR), tensile strength (TS), percent elongation at break (E), heat sealing strength (HS), and Hunter color values (L, a, and b) were determined. WVP of corn zein coated ${\kappa}-carrageenan$ films decreased significantly (p<0.05) as the concentration of com zein increase. Coating with corn zein also decreased film WS and SR linearly with the concentration of corn zein. TS of corn zein coated carrageenan films decreased linearly with corn zein concentration. All the com rein coated carrageenan films showed heat sealing properties even though their sealing strength was less than half of corn zein film. Obviously corn zein coating affected color of ${\kappa}-carrageenan$ films, which was mainly caused by increase in yellowness (Hunter b-value).

• Journal of Adhesion and Interface
• /
• v.24 no.3
• /
• pp.86-94
• /
• 2023

To fabricate all-solution-processed flexible Organic Light-Emitting Diodes (OLEDs), we demonstrated a bonding technology using a polyethyleneimine (PEI) as an adhesion layer between the two substrates. As the adhesion layer requires not only a high adhesion strength, but also a high current density, we have tried to find out the optimum condition which meets the two requirements at the same time by changing experimental factors such as PEI concentration, thickness of the layer and by mixing some additives into the PEI. The adhesion strength and the electrical current density were investigated by tensile tests and electron only device (EOD) experiments, respectively. The results showed that at higher PEI concentration the adhesion strength showed higher value, but the electrical current through the PEI layer decreased rapidly due to the increased PEI layer thickness. We added Sorbitol and PolyEthyleneGlycohol (PEG) into the 0.1 wt% PEI solution to enhance the adhesion and electrical properties. With the addition of the 0.5 wt% PEG into the 0.1 wt% PEI solution, the device showed an electrical current density of 900 mA/cm² and a good adhesion characteristic also. These data demonstrated the possibility of fabricating all-solution-processed OLEDs using two-substrate bonding technology with the PEI layer as an adhesion layer.

• Korean Chemical Engineering Research
• /
• v.56 no.5
• /
• pp.679-686
• /
• 2018

Reverse osmosis (RO) concentration of sodium chloride, sodium acetate, and sodium citrate solutions has been performed by polyamide RO membrane. Concentration polarization phenomena was also studied by changing pressure, solute kinds, and initial solution concentration. Pressure effect on permeation flux was that the increase of flux was accompanied by the increase of pressure. Flux increase was observed by the decrease of initial solution concentration. Surface concentration on the RO membrane increases and so flux declines due to the concentration polarization. In the later phase of concentration, concentration polarization effect was decreased by the back diffusion of solute from the polariztion layer. In case of sodium citrate, its large ion size and charge density resulted in the discrepancy between theory and experimental data of concentration polarization. It may be due to electric repulsion on the membrane surface.

• Resources Recycling
• /
• v.25 no.2
• /
• pp.25-32
• /
• 2016

A electrodeposion behavior of tin was tested to recovery of tin metal from sulfate solution using a newly designed cyclone type electrolyzer. Parameters, such as flow rate, current density, tin and sulfuric acid concentration in the electrolyte were investigated. From the experimental results, a powered tin metal below $100{\mu}m$ can be obtained. As the increase of flow rate, current density and sulfuric acid concentration in the electrolyte, electrodeposition ratio of tin and current efficiency were increased. The electrodeposition ratio of tin was increased with the decrease of tin concentration in the electrolyte, but the current efficiency was decreased.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1998.10a
• /
• pp.163-165
• /
• 1998

한외여과 분리막을 이용한 공정은 화학공업을 비롯하여 의약품, 식품, 폐수 처리 및 반도체산업 등의 여러 분야에서 이용되고 있다. 그러나 한외여과 분리 공정에 잇어서 해결되어야 할 중요한 문제점은 투과유속의 감소현상이다. 용액의 투과유속이 순수의 투과유속보다 낮아지는 투과유속의 감소현상은 크게 농도분극과 막오염 현상에 기인한다. 농도분극에 의한 투과유속의 감소는 보통 1분 이내의 매우 짧은 시간 안에 일어나지만 시간이 지속됨에 따라 투과유속이 감소하는 현상은 막오염에 기인한다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.84-85
• /
• 2014

레늄미량함유 염산용액중에서 추출제로 Alamine304-1(Henkel), Cyanex272(Daihachi)와 $D_2EHPA(Henkel)$를 사용하여 용매추출공정으로 레늄의 추출거동을 조사하였다. 수상에 존재하는 레늄은 60 ppm이며, Kerosine과 추출제를 혼합한 합성용액을 사용하였다. 레늄 회수의 최적조건을 조사하기 위해 추출제의 종류 및 농도, 수상과 유기상의 상비, HCl의 농도, 불순물 분리 실험 등을 진행하였다. 수상의 pH가 2 이하이고, 상비는 1:1로 하여 1 % Alamine304-1으로 10분간 반응시킨 후 상온에서 1시간 이상 정치시켰을 때 레늄의 추출율이 99 % 이상으로 가장 우수하였으며, Cyanex272와 D2EHPA를 사용한 경우에는 레늄의 거의 추출되지 않았다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.300-300
• /
• 2010

Thiourea가 염료감응 태양전지의 I-/I3- redox 전해질 내에서 additive로 사용될 때의 효과를 알아보았다. I-/I3- 가 존재하는 전해질에 thiourea를 첨가하게 되면, 전류는 40% 증가하고 전압은 9% 내려간다. 전류 증가로 인해 전체 효율은 23%의 증가분을 보인다. thiourea가 녹아있는 acetonitrile 용액은 pH가 10로 Bronsted base인데, I-/I3- 가 존재하는 전해질 용액에 thiourea를 넣으면, pH=3의 변화를 보인다. 이것은 thiourea와 iodine 사이의 반응에 의해 수소이온 농도가 증가했기 때문이다. 또한 UV-Vis 분광분석 결과 I3- 농도가 감소한 것을 확인하였으며, 이는 iodine이 thiourea 와 반응에 참여하여 소모되었기 때문에 상대적으로 I3- 농도가 감소한 것으로 해석할 수 있다. I3- 농도 감소로 인해 recombination 이 감소하여 voltage가 증가할 것으로 기대되었으나, I2와 thiourea의 반응으로 인해 생성된 proton 농도로 인해 TiO2 의 전도띠 에너지가 변화가 더 우세하게 일어나 결과적으로는 voltage가 감소한 것이다. 증가된 photocurrent 의 경우 역시, proton 농도 증가 및, iodide 농도 증가로 설명할 수 있었다.

• Fire Science and Engineering
• /
• v.22 no.5
• /
• pp.83-89
• /
• 2008

Using the high expansion foam generator of ISO 7203-2 which spray 6 liter at 5 bar, foam generation characteristics was studied. Wind flow rate, foam screen, concentration of foam agent solution and concentration of salt of water were varied to find the effect of the parameters on foam generation. Research result showed that expansion ratio of foam was increased with wind flow rate. The expansion ratio of foam in the perforated type standard screen was higher than the wire mesh screen. Expansion ratio and drainage time were increased with increase of foam solution concentration. But a increase of salt concentration in solution showed the decrease of expansion ratio and drainage time.