• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.252.1-252.1
• /
• 2015

최근 화석연료 고갈 문제를 해결하기 위해 대체에너지 개발과 다양한 형태의 에너지 개발에 관한 연구가 활발히 이루어지고 있다. 특히, supercapacitor는 high energy density, high power density, longer life-time과 같은 특성으로 인해 에너지 저장 소자로 각광 받고 있다. Supercapacitor는 석유를 대체할 수 있으며 이산화탄소 배출이 없는 친환경 에너지인 태양광, 풍력, 수소연료전지 등의 신재생에너지 저장장치로써 큰 비중을 차지한다. Supercapacitor의 종류인 electrical double layer capacitors (EDLCs) 는 전극과 전해질 사이에 발생하는 전기 이중층에 축적되는 전하를 이용하여 에너지를 저장하는 반응 메커니즘을 가지며 전극 재료로는 탄소 소재를 사용한다. 탄소 소재는 환경 오염이 적고 가격이 저렴하며 넓은 표면적이라는 장점이 있다. 하지만 기존 탄소 소재는 이러한 장점을 가지지만 supercapacitor로써의 효율이 좋지 않게 나온다. 이런 문제를 개선하기 위하여 그래핀 나노플레이트(Graphene nanoplate, GNP) 위에 직접 탄소나노튜브(Carbon nanotube, CNT)를 성장 시킴으로써 GNP-CNT 하이브리드 탄소 소재를 제조하여 전극으로 사용하였다. 이 GNP-CNT 하이브리드 탄소 소재는 다차원 구조를 가짐으로써 기존 탄소 소재들보다 분산이 잘되고 전해질과의 작용하는 비표면적이 넓다. 전극을 제작하여 Cyclic voltammetry(CV)와 galvano를 측정한 결과는 기존 탄소나노튜브보다 5배 정도의 정전용량(Capacitance)를 가졌다. 이 전극의 구조적 특성을 관찰하기 위해 SEM, TEM 등을 측정하였다.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.1
• /
• pp.8-16
• /
• 2006

The communication through optical fiber is taking an important role of the expansion of communication network with excellent transmitting rate and quality. As the optical communication is introduced to the backbone network at first and becomes a general communication method of network, the demand of kernel parts of optical communication such as PLC(Planar Light Circuit), Coupler, and WDM(Wavelength Division Multiplexing) element increases. The alignment and the attachment technology are very important in the fabrication of optical elements. In this paper, the driving mechanism of ultra precision stage is studied with the aim of optimal design of stage. The travel and the resolution of stage are investigated. The hysteresis of the stage is generated because of PZT actuator. The hysteresis and the inverse hysteresis are modeled in X, Y, and Z-axis motion. The input data of desired displacement of the stage according to input voltage is obtained from the inverse hysteresis equation. In the result of experiments with the input data, the errors due to hysteresis are well compensated.

• 한국정보통신설비학회:학술대회논문집
• /
• 2003.08a
• /
• pp.165-171
• /
• 2003

e-VLBI(electronic VLBI)는 각 관측 사이트에서 얻은 대용량의 VLBI 데이터를 영상합성처리 센터로 전송하기 위하여 초고속정보통신망을 이용하는 기술이다. 이는 전세계의 관측소에서 얻어낸 막대한 용량의 데이터를 실시간, 준-실시간 형태로서 데이터센터에 전송할 수 있는 유일한 방법으로서 전세계에 걸쳐 구축된 초고속정보통신망을 적극적으로 활용하는 애플리케이션이라 할 수 있다. 한국천문연구원에서는 연세대, 울산대, 탐라대에 건설되는 20m 전파망원경과 대덕전파천문대의 14m 안테나를 네트워크로 연결하는 e-KVN(Korean VLBI Network) 계획을 추진 중에 있으며 이는 각 관측소에서 얻은 VLBI 데이터를 네트워크를 통하여 1024Mbps로 데이터센터까지 실시간으로 전송하는 것을 그 궁극적 목표로 하고 있다. 본 논문은 크게 5장으로 이루어져 있는데 먼저 1장 서론과 2장에서는 각각 VLBI와 e-VLBI에 대한 간략한 소개와 원리에 대해 알아보도록 한다. 3장에서는 e-VLBI의 작동 메커니즘, 4장에서는 e-KVN의 명세 및 현재 구상하고 있는 e-KVN의 네트워크 토폴로지에 대해 기술하고 5장에서 e-KVN의 전망 및 구축에 있어서 예상되는 문제점 및 향후 보완해야 네트워크 기술에 대해 간략히 언급하는 것으로 결론을 맺도록 한다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.1
• /
• pp.47-53
• /
• 2016

The electrolyte wetting phenomena occurring in the electrode of lithium-ion battery was studied using lattice Boltzmann method (LBM). Recently, lithium-ion batteries are being mixed with small particles on the active material to increase the capacity and energy density during the electrode design stage. The change to the mixing ratio may influence the wettability of electrolyte. In this study, the changes in electrolyte distribution and saturation were investigated according to various mixing ratios of active material. We found that the variations in mixing ratio of active material affect the wetting mechanism, and result in changes to the wetting speed and wettability of electrolyte.

• Review of KIISC
• /
• v.17 no.5
• /
• pp.15-24
• /
• 2007

모바일 및 웹 어플리케이션의 통합으로 인해 모바일 사용자들이 접근할 수 있는 서비스의 수는 크게 증가했지만 사용자들은 여러 개의 사용자 이름과 패스워드를 관리해야하는 어려움을 가지고 있다. 이와 유사한 상황은 다양한 종류의 개인장비, 무선 센서, 서버, 서비스 그리고 댁내에서 네트워크화 된 기기들로 구성된 흠 네트워크 환경으로 확장될 수 있다. 최근 디지털 홈 워킹 그룹 (DHWG: Digital Home Working Group)은 보안 강화를 위해 사용자와 기기에 대한 호환성 있는 인증 및 인가 메커니즘을 위한 프레임워크를 준비할 것을 권고하고 있다. 인터넷, 인트라넷 그리고 댁내에 분산된 자원들을 사용하기 위해 각 어플리케이션에 대한 사용자의 인증 및 인가는 반드시 필요하지만 이는 보안 관리와 시스템성능 측면에서는 커다란 부담이 된다. 본 논문에서는 XML기반의 단일인증기술 표준인 SAML (Security Assertion Markup Language)을 이용한 단일인증 아키텍처를 제안한다. 제안된 아키텍처를 기반으로 모바일 및 유비쿼터스 서비스 환경에서 모바일과 홈 기기간에 서로 다른 개체의 인증 및 인가 프로파일 정보의 교환을 가능하게 하므로 분산 환경에서의 보안 관리를 강화할 수 있다. 특히 제안된 아키텍처에서는 고도의 연산능력을 필요로 하는 보안정보의 전자서명 및 암복호 작업을 유선환경에 구성된 고성능의 기기로 전가하고 모바일 기기는 사용자의 인증을 검증할 수 있는 작은 문자열 형태의 artifact를 보유하고 이를 사용자의 인증에 이용함으로써 낮은 컴퓨팅 능력과 기억용량의 한계 같은 모바일 기기의 성능적인 제약을 극복할 수 있게 한다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.5
• /
• pp.861-866
• /
• 2024

The operation mechanism of the superconducting coupled DC circuit breaker system and the simulation analysis of the transient state in DC power networks showed that, when only a conventional DC circuit breaker was applied, the fault current increased and the interruption operation was not fully achieved. In contrast, when coupled with superconductors, the fault current was limited, and the interruption operation was completed quickly. The superconducting coupled DC circuit breaker system proposed in this paper is stable and has the potential to respond to increases in the capacity of power systems. Additionally, it has been confirmed that this system can reduce the burden on circuit breakers, thereby enhancing their lifespan and stability.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.3
• /
• pp.537-542
• /
• 2022

There is a limit to the current indoor air quality (IAQ) monitoring method using fixed sensors and devices. A mobile robot for IAQ monitoring was developed by mounting IAQ monitoring sensors on a small multi-legged robot to minimize vibration and protect the sensors from vibration while robot moves. The developed mobile robot used a simple gait mechanism to enable the robot to move forward, backward, and turns only with the combination of forward and reverse rotation of the two DC motors. Due to the simple gait mechanism, not only IAQ data measurements but also gait motion control were processed using a single Arduino board. Because the mobile robot has small number of electronic components and low power consumption, a relatively low-capacity battery was mounted on the robot to reduce the weight of the battery. The weight of mobile robot is 1.4kg including links, various IAQ sensors, motors, and battery. The gait and turning speed of the mobile robot was measured at 3.75 cm/sec and 14.13 rad/sec. The maximum height where the robot leg could reach was 33 mm, but the mobile robot was able to overcome the bumps up to 24 mm.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.7
• /
• pp.854-867
• /
• 2014

In the circumstance that high oil price state is continued over the world, the investment in crude oil development by oil major is a trend of increasing. Recently the number of delivered drill-ship for 5 years has been sharply increased all over the world and about twice than that of past 30 years. As addition to the increase of the drill-ship demand, the operation of drill-ships which is delivered recently is about 3,000 meters, ultra deep sea, on average and the work area is expending. Accordingly the drilling system including the size and length of pipe for drilling has been bigger and bigger and the power supply equipment for operation system also has large capacity. Unlike merchant vessel, high power and high voltage of diesel generators are required for drill-ship for which the demand for V-type 320 bore of diesel generator has increased. It is on the raised that the importance of lubrication oil cleaning for diesel generator on drill-ship which has longer time for construction, and also long term low load operation is unavoidable during commissioning of equipments. Recently it was reported that engine crankpin was damaged due to the hard contact caused by the abnormal wear down(Cam wear) on crankpin and bearing. The same pattern of wear down was found through the inspection on series vessels and the other vessel under commissioning. The purpose of this paper is to analyze of the wear mechanism based on the observation and theories and objective research from actual cases and to prepare the counter measures to avoid foreseeable damage when the lubricating oil is not properly cleaned.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.2
• /
• pp.121-141
• /
• 2017

The thermal analysis of an underground power conduit for electrical cables is essential to determine their current capacity with an increasing number of demands for high-voltage underground cables. The temperature rises around a buried cable, caused by excessive heat dissipation, may increase considerably the thermal resistance of the cables, leading to the danger of "thermal runaway" or damaging to insulators. It is a key design factor to develop the mechanism on thermal behavior of backfilling materials for underground power conduits. With a full-scale field test, a numerical model was developed to estimate the temperature change as well as the thermal resistance existing between an underground power conduit and backfill materials. In comparison with the field test, the numerical model for analyzing thermal behavior depending on density, moisture content and soil constituents is verified by the one-year-long field measurement.

• Journal of Adhesion and Interface
• /
• v.2 no.4
• /
• pp.10-23
• /
• 2001

In order to increase the lower values of % grafting and monomer conversion in the emulsion graft polymerization of methylmethacrylate(MMA) onto sodium alginate (SA; a polymer electrolyte) with alginic acid-g-PMMA, the graft polymerization with water soluble (methanol and acetone) and insoluble solvents was carried out using a varity of solvent amounts and agitating rates. And some physical properties of the graft polymer were also investigated. In the polymerizations with water insoluble solvent, there were pronounced improvements in both % grafting and MMA conversion by the promotion of MMA diffusion from the core to the SA adsorpted on the outer layer of particle and that of MMA complex formation with SA. And the effect was larger for the solvents (cyclohexane, decalin) which do not dissolve PMMA. On the other hand, in the polymerization with water soluble solvent, there was an significant increase in MMA conversion and a considerable increase in the % grafting by the destruction of electrical double layer around the SA chains, abstracting the hydrated water in the layer and the effect was more potential in the case of methanol which is a precipitant of PMMA.