• Proceedings of KOSOMES biannual meeting
• /
• 2007.05a
• /
• pp.109-113
• /
• 2007

Yacht have an high powered main engine relatively light hull, so the noise generated from the engine have a bad influence upon the crew and passenger. Recently, cruise yacht is made an attempt by domestic production skill, however the insulation skill of the noise made by the main engine is not satisfy the real purchasing power of the buyer. Like this, yacht cabin's noise level is becoming the barometer to decide the purchase. the method to insufficient. However, if we use the skill of the monitoring equipment and the genetic algorithm system, the circumference of the main engine can be enclosed by an high quality absorbtion wall and the noise levels of the cabins are improved. In this study, the sound absorbtion barrier is experimentally researched by change the volume and the length of the neck for the Helmholtz resonator as the resonator can absorb the noise effectively.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.06a
• /
• pp.8-9
• /
• 2013

본 연구는 세계 해양레저시장 20% 달성을 목표로 하고 있는 해양레저장비산업의 비전 및 핵심과제 달성을 위하여 해양레저선진국의 산업현황 및 해양레저시장의 동향 및 현황을 분석하고 산업의 경쟁력 확보를 위한 방안을 다음과 같이 제시하였다. 첫째, 국내 보급형 레저선박을 개발하여 증가하고 있는 국내 수요에 대응하여야 하며, 둘째, 국내 우수의 IT 기술을 활용한 IT기반 해양레저장비를 개발하여 국외 시장 진출 및 조선기자재 산업으로의 파급이 필요하다. 셋째, 해외시장 개척을 위한 고급형 모델 및 슈퍼요트와 관련된 기술을 개발하여 고부가가치 수요시장을 공략하여야 하고 넷째, 국내 실정에 맞는 마리나 모델을 개발하여 이미지 개선 및 국내 외 경쟁력 확보가 필요하다. 마지막으로 해양레저산업은 수요창출을 위한 공조체제가 반드시 필요하므로 해양레저문화의 발전이 반드시 병행되어야 한다. 해양레저산업은 경제동향 및 트렌드에 민감한 시장으로 관련된 기술개발과 시장을 둘러싼 국가 간 경쟁의 적극적인 대응마련과 단계적 전략 마련에 대한 지속적인 연구가 필요하다.

• Bulletin of Korea Environmental Preservation Association
• /
• v.9 no.7
• /
• pp.2-5
• /
• 1987

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.3
• /
• pp.337-343
• /
• 2006

• 한국기계연구소 소보
• /
• v.4 no.1
• /
• pp.51-70
• /
• 1981

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.840-854
• /
• 2005

• 해운
• /
• no.5 s.16
• /
• pp.2-19
• /
• 2005

• Journal of the Society of Naval Architects of Korea
• /
• v.49 no.1
• /
• pp.93-98
• /
• 2012

In this study, we introduced image processing technic to measure shape variations of general bodies and applied it to the flexible yacht sail. Shape measurements of simple bodies sails were carried out and results showed that technic can be a reliable method to measure shape variations of the flexible yacht sail. The sail shape variation of 30ft sloop type yacht sail is measured on different sailing conditions. As velocity and direction of wind are increased, trailing edges in the upper part of the sail become more open than the lower part of the sail which are not changed. So it is confirmed that the shape measurement of a sail shape depending on a sailing condition is possible to use image processing scheme.

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.1
• /
• pp.125-133
• /
• 2006

It is important to understand flow characteristics and performances of sails for both sailors and designers who want to have efficient thrust of yacht In this Paper the viscous flows around sail-like rigid wings, which are similar to main and jib sails of a 30 feet sloop, are calculated using a CFD tool. Lift, drag and thrust forces are estimated for various conditions of gap distance between the two sails and the center of effort of the sail system is obtained. Wind tunnel experiments are also carried out to measure aerodynamic forces acting on the sails system and to validate the computation. It is found that the combination of two sails produces the lift force larger than the sum of that produced separately by each sail and the gap distance between the two sails is an important factor to determine total lift and thrust.

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.1
• /
• pp.116-124
• /
• 2006

A model test was carried out, in order to verify the hydrodynamic performances of public 30 feet class sailing yacht. In the initial design stage, the performances and the running attitude of sail yacht including the hull form and sail plan, appendages were estimated by VPP, from which made the representative test conditions. A new experiment system such as captive model device was composed because the running attitude could be changed by wind conditions. The test results show that the minimum resistance is generated in the heeling 20 degree. which was expected in the initial design stage. It is thought to be the useful informations that the keel has an effects on hydrodynamic forces and resistance differences between the upwind and the downwind condition. Also this paper is associated with the state-of-the-art of calculating sailing yacht performance as this is performed in velocity Prediction program (VPP) The VPP results shows a typical shape of a sailing yacht and the designed yacht has the best performance at 120 degree angle of true wind with 20 knots.