• Proceedings of the KIPE Conference
• /
• 2016.11a
• /
• pp.186-187
• /
• 2016

본 논문에서는 권선형 유도기 기반의 엔진 발전기를 이용한 비상 전원 장치를 제안한다. 기존의 외부 여자동기 전동기를 이용한 엔진 발전기 시스템과 다르게 권선형 유도 전동기를 사용하여, 고정자 권선은 계통에 직접 연결되고, 회전자 단에는 배터리를 전력원으로 하는 인버터를 연결한다. 권선형 유도기가 엔진과 결합되어 엔진 발전기로 연결된 상태에서 계통사고로 계통이 단락 되는 경우 회전자 단 인버터를 이용하여 중요 부하에 전력을 공급하는 동시에 전동기를 구동시켜 엔진 발전기 동작 영역까지 전동기를 구동시키는 제어 방법을 제안한다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.3
• /
• pp.267-272
• /
• 2012

This paper propose the implementation of robust fuzzy controller for controlling an active magnetic bearing (AMB) system with 6 degree of freedom (DOF). A basic model with 6 DOF rotor dynamics and electromagnetic force equations for conical magnetic bearings is proposed. The developed model has severe nonlinearity and uncertainty so that it is not easy to obtain the control objective. For solving this problem, we use the Takagi-Sugeno (T-S) fuzzy model which is suitable for designing fuzzy controller. The control object in the AMB system enables the rotor to rotate without any phsical contact by using magnetic force. In this paper, we analyze the nonlinearity of the active magnetic bearing system by using fuzzy control algorithm and desing the robust control algorithm for solving the parameter variation. Simulation results for AMB are demonstrated to visualize the feasibility of the proposed method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.146-152
• /
• 2016

This paper describes a multi-physics analysis of a high resolution winding type resolver and rotary transformer using FEM (Finite Element Method). The rotary transformer boosts the input voltage to a high voltage which can be input into the rotor windings of the resolver. Through multi-physics models of the transformer and resolver, the characteristics of the output signals for the resolver system with high resolution can be derived. Moreover, the circuit model of the interface part between the transformer and resolver should be considered, because of the calculation of the input current to the resolver. The winding type resolver is composed of 32x and 1x stator windings for high resolution. Then, the output signals of the stator windings, which make sinusoidal SIN and COS waves with a $90^{\circ}$ phase difference, are verified.

• New & Renewable Energy
• /
• v.6 no.4
• /
• pp.41-49
• /
• 2010

Over the last decade, wind turbine industry has rapidly increased around world. These days many parts of the wind generators are induction generator. But it has some problems such as gearbox failure, rotor excitation and maintenance. Thus many manufacturers are considered permanent magnet synchronous generator named PMSG and direct drive. PMSG uses NdFeB magnet has many the advantage compare with induction generator. In this study, 3MW class outer rotor type PMSG for wind turbine is proposed. The generator features 2.6m stator outer radius, 1200mm stator length, 81 pole pairs, 14 rated rpm, 42kN/$m^2$ shear force density and 94.2% efficiency. Design and analysis generator using FEM program. Then calculate and derivate no load voltage, losses, conductor temperature. To reduce total harmonic distortion and cogging torque, the stator is applied the stator skewing. And to evaluate the designed generator, compare with other generators by active mass per rating torque and torque density.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.36T no.3
• /
• pp.50-55
• /
• 1999

Brushless DC Motor(BLDCM) has high efficiency. But this type of motor needs a rotor sensor which complicates the motor configuration. Rotor position sensor degrades system reliability in the severe environmental condition. In this paper, we study a controller which permits the determination of the rotor position by the back EMF to eliminate the rotor position sensor Also, since the back EMF is zero at standstill, a starting technique which permits the starting of an asynchronous motor without a sensor is described. The controller is implemented using microcontroller for minimal external component.

• Journal of Advanced Navigation Technology
• /
• v.27 no.1
• /
• pp.96-101
• /
• 2023

In this work, an energy harvester (EH) on the rotating shaft has been proposed for a wireless sensor system (WSS) applications. The EH was designed and implemented to the shaft with a diameter of 20 cm to continuously power a wireless sensor system (WSS). The rotor has coils wound in pairs on seven U-shaped cores attached to the shaft. The stator consists of eight pairs of magnets attached to eight I-cores and they are fixed to an outer fixture. The generated power of the EH was investigated as function of the air gap between the rotor and stator, the number of turn of coils, and shaft speed. The fabricated EH produced power up to 2.87 W at 300 rpm and the 3 mm air gap.

• Proceedings of the KIEE Conference
• /
• 2004.10a
• /
• pp.104-106
• /
• 2004

본 논문에서는 세탁기용 외전형 BLDC 전동기를 기본 모델로 하고, 이를 FEM 상용프로그램인 Maxwell을 이용하여 해석 및 설계를 하고자 한다. 본 논문에서 설계대상으로 하는 외전형 BLDC 전동기는 기존에 사용중인 모델로서, 내부의 고정 전기자는 기존의 모델에 맞도록 외경을 그대로 유지하면서 Teeth 등을 설계변수로 하였고, 외부의 회전 자석계자는 주어진 외경의 치수 범위 내에서 영구자석의 형상과 두께 회전자 요크의 두께 등을 설계 변수로 하여 코깅 토오크가 최소가 되도록 최적 설계를 하였다. 유한요소법을 적용하여 자속분포, 코깅 토오크, 토오크 둥을 해석하였고, 코깅 토오크의 최소화를 통하여 효율 및 전동기의 성능을 향상시켰다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.9
• /
• pp.1146-1149
• /
• 2014

To discriminate polarities of stator windings for 3 phase induction motors terminal tags of which are not readable, it is possible to utilize the residual magnetic flux present at their rotors as well as to use the way based on external exciting current. The induced voltages are basically decided by parameters such as the quantity of residual flux, the rotator speed by hand force and the phase properties between stator windings. To adopt induced voltages by residual flux for polarity discrimination at sites, the measured voltages by multi-testers need to be readable in magnitude enough to discriminate winding condition with reasonable phase characteristics. This study focuses on the analysis of various connection cases in the expectation that the summing voltages induced by residual flux shall show zero in case of normal connections while the sum becomes greater indication if the connection is in wrong condition. The proposed method is applied to actual motors to disclose how effective it is for polarity discrimination at sites through comparison of output signals between normal and fault connections.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.4
• /
• pp.27-31
• /
• 1999

This paper covers starting characteristics and design of wound motor induction rmtor can used to double excited induction mootor. They are employing in many electrical equiprrent system of industrial field The stator is satre as that of conventional induction motor. But rotor was rewind with new style, as result both of starting torque and operating efficiency could be high, But starting current could be small. Could obtain the satre result as that of conventional induction rmtor with external resistance on the rotor. The structure could be simple, system cost could be low and the maintanence free, Because of no slip rings, no brushes and no external resistance.stance.

• Proceedings of the KIPE Conference
• /
• 2013.11a
• /
• pp.173-174
• /
• 2013

본 논문에서는 단상 전원과 고정자가 직접 연결되고 회전자에는 독립된 하나의 인버터가 적용되는 전동기 구동 시스템에 대한 분석을 진행한다. 이와 같은 전동기 구동 시스템의 구조는 양방향 운전이 가능하며, 인버터의 직류단 전압을 자유롭게 제어할 수 있다. 또한 입력단에 어떠한 추가적인 장치도 요구하지 않으므로 전동기를 단상 계통에 직접 연결할 수 있어 가전 제품의 적용에 용이하다. 본 논문에서는 이러한 권선형 전동기의 구동 방식을 설명하고, 세탁기 운전을 그 목표로 하여 권선형 전동기의 설계 및 FEM 시뮬레이션을 진행한다. 시뮬레이션은 Maxwell 로 설계된 전동기 FEM 모델을 Simplorer 시뮬레이션을 통해 연동해석을 진행하였다.