• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2005.04a
• /
• pp.63-70
• /
• 2005

For using narrow site effectively, recently constructions of high-rise buildings have been increased. High-rise buildings are mainly governed by wind loads. Since wind flow Is vaned irregularly, the experimental method such as wind tunnel test is used to evaluate real wind loads. In this study, it is intended to estimate design wind pressure and amounts of material of cladding by AIK recommendations and wind tunnel test. Also, this study includes the investigation of reliability, suitability and economical efficiency in design of cladding of buildings by AIK recommendations and wind tunnel test by comparing and examining various results. Finally, it is concluded that not only AIK recommendations but also wind tunnel test should be considered to get the reasonable wind pressure acting on the cladding of high-rise buildings.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.203-207
• /
• 2005

An experimental study was carried out to investigate the effect of film cooling in the thrust chamber of liquid rocket using LOx and Kerosene as propellant. The heat fluxes were obtained from the measured wall temperature to the axial direction of thrust chamber for different type of coolant, the various O/F ratio, mass flow rate and the location of the film cooling injector. A thin wall combustion chamber and nozzle were used to obtain the heat flux.

• Journal of Power System Engineering
• /
• v.9 no.2
• /
• pp.5-13
• /
• 2005

새로운 엔진을 개발하기 위한 중요한 과정 중에 하나로서 엔진 연소실 가시화를 들 수 있다. 그러나 실제 운전상태에 있는 엔진 연소실을 가시화하기 위해서는 극복해야 할 여러 가지 어려운 점들이 있기 때문에, 지금까지는 간단한 실험적 접근방법 혹은 소수의 이론적 해석 방법만이 보고 된 상태이다. 본 연구에서는 가시화용 수정엔진을 개발하기 위해 필요한 몇 가지 중요한 사항들을 다루었다. 즉, 가시화용 수정엔진의 안전한 운전을 위하여 엔진 실린더 외부에 강제대류 효과를 주었고, 또한 실린더 두께 변화에 따른 온도 및 응력장의 분포를 정량적.정성적으로 고찰하였으며 다음과 같은 결론을 얻을 수 있었다. 첫째, 실린더 라이너 외벽을 강제대류로 냉각했을 경우, 열응력 감소에 매우 큰 효과를 보았다. 둘째, 가시화용 수정엔진 라이너의 최적 두께를 도출하였다. 셋째, 전통적인 주철 소재의 실린더 라이너와 비교 시, 주철 라이너는 연소에 의한 폭발 압력이 실린더 안전성에 큰 영향을 미치지 않는 것으로 보고 되었으나, 수정 라이너의 경우 연소압력 및 연소에 의한 연소열 모두 중요한 설계 인자임을 입증하였다.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.42 no.5 s.305
• /
• pp.35-42
• /
• 2005

In this study, we designed and developed an ultrasonic transducer which can measure urine volume based on the estimation of distance between the interior-wall and posterior-wall of bladder. Measurement of urine volume is a way to help patients with urinary incontinence by detecting the amount of urine before the urine is released from the bladder. With the results of this experiment, we can measure the urine volume more accurately and also develop an incontinence preventive system. This study can help patients with urinary incontinence and enuresis to live longer, healthier lives.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.5
• /
• pp.525-532
• /
• 2000

Evaporation heat transfer characteristics have been investigated experimentally when distilled water is sprayed on the outside wall of horizontal tubes in a evaporator. This problem is of particular interest in the design of evaporator of an absorption system. Hydrophilic surface treatment was employed to increase the wettability on copper tubes. The results indicate that evaporation heat transfer with hydrophilic tubes is shown to be 25-44% higher than that with bare tubes at evaporation pressure of 31.8 Torr(evaporation temperature$ 30^{\circ}C). Evaporation heat transfer rates of hydrophilic treatment tubes are improved substantially, comparing with those of conventional copper tubes in the wide range of operating parameters, such as water inlet temperatures, water mass flow rates and evaporation pressures.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.11a
• /
• pp.165-166
• /
• 2012

A thermal stresses by heat of hydration was analyzed according to a change of a pour height in reactor containment building. In case of more than 3.6m pouring height a crack index by heat of hydration analysis resulted in less than 1 because there is not a construction joint of vertical direction and for a self-restraint effect of circumferential section shape. Therefore detailed consideration on a mixture proportion of binder type, quantity in concrete and selection of a form in seasonal air temperature is needed for a control of tensile stress by heat of hydration.

• Journal of the Korean Society of Visualization
• /
• v.1 no.1
• /
• pp.82-91
• /
• 2003

The study of swirl flow has been of technical and scientific interest because it has an internal recirculation field and its tangential velocity is related to the curvature of the streamline. The fluid flow for ducts or elbows of an internal engine has been much studied through numerical methods and experiments, but studies about swirl flow has been insufficient. Using the PIV (Particle Image Velocimetry) method, this study found the time-mean velocity distribution, time-mean turbulent intensity, with swirl and without swirl flow for Re=10,000, 15,000, 20,000, and 25,000 along longitudinal sections and the results appear to be physically reasonable. In addition, axial velocity distribution is compared with that of Jeong's, Kodadadi's and Murakami's. It was found that the highest velocity of swirl and non-swirl flow occurs in the opposite position at the center of a round tube, $\phi$=45$^{\circ}$

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.136-141
• /
• 2005

The application of photovoltaics into building as integrated building components has been paid more attention worldwide. Photovoltaics or solar electric modules are solid state devices, directly converting solar radiation into electricity; the process does not require fuel and any moving parts, and produce no pollutants. So, the purpose of this research is to present how to get PVIB which can be applied building facade and how to apply it. From the basis of these results this study will intend to develop an integrated for optimal design of PV System.

• Journal of Power System Engineering
• /
• v.4 no.2
• /
• pp.17-24
• /
• 2000

직경비가 0.26, 0.39, 그리고 0.56인 경우 거칠기를 내벽면에, 외벽면에, 그리고 양벽면에 각각 설치한 동심환형관에서 완전히 발달된 난류유동에 대한 거칠기 효과를 실험과 이론으로 해석하였다. 그리고 거칠기 효과를 정량적으로 파악하기 위해 양벽면 모두 매끈한 환형관의 경우도 포함하였다. 실험에서 마찰계수를 구하는데 필요한 속도분포와 전단응력들은 피토튜브와 X-형 열선풍속계를 사용하였다. 이론 해석은 수정대수 난류모델을 사용하였고 그 결과를 이론값과 비교하여 아래의 결론을 얻었다. 1) 무디다이어그램 (Moody diagram)은 거칠기가 설치된 이중관에는 적용할 수 없음을 보였다. 2) 경우(c) 와 (d)에서는 반경비가 클수록 반드시 마찰계수가 증가하지 않았다. 3) 4개의 경우중 거칠기로 인해 마찰계수가 증가하는 크기의 순서는 경우(d)가 가장 컸고 경우(a)가 가장 작았다.

• Journal of the Korean Society of Visualization
• /
• v.1 no.2
• /
• pp.38-46
• /
• 2003

An experimental investigation was performed to study the turbulent characteristics of swirling flow a 90$^{\circ}C$ circular tube for Re = 10,000, 15,000 and 20,000. 2D-PIV(Particle Image Velocimetry)technique was employed to measure the fluctuation velocity field. The results include spatial distributions of mean velocity vectors, turbulence intensity and turbulence kinetic energy. The axial and radial turbulence intensities, and kinetic energy profiles show double-peak structures in the inlet region of the 90 degree bend and the profiles are disappeared along the test tube with decaying the swirl intensity.