• 한국군사과학기술학회지
• /
• 제1권1호
• /
• pp.65-81
• /
• 1998

Objective technology development has been carried out aiming performance improvement of the stabilized gun-pointing system for Type-4 tank. The full nonlinear simulation programs with gun bending modes and nonlinearities were developed to estimate, analyze and design the driving and stabilization system, and validated through the comparisons between simulations and test results of the existing Type-1 tank. The prototype is designed, fabricated, tested and evaluated on the test range as well as in the laboratory and followed by development and operational tests. The performance test results on stationary and on-the-move conditions are turned out to be superior to those of the advanced tanks developed in foreign countries.

• 제어로봇시스템학회논문지
• /
• 제3권5호
• /
• pp.443-449
• /
• 1997

LQ-servo design procedure introduced by Athans is a method using a partial states feedback and an output feedback in order to improve the poor performance robustness of the LQR as well as to maintain its stability robustness. Although the method guarantees good stability robustness, it is not effective in performance robustness as it does not match the singular value at low or high frequencies of the transfer matrix obtained by breaking at the plant output. This paper intends propose of a new method, using the limited behaviour of the control gain introduced by Kwakernaak and Sivan, in order to improve it does it refer to controlga introduced by kwakernaak or the new metho Anblguouls.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.87-88
• /
• 2006

In this paper, tuning rules of the PID controller for load disturbance rejection are proposed incorporating with real-coded genetic algorithms(RCGAs). The optimal parameters sets of the PID controller are obtained based on a first-order plus time delay model and a RCGA. As for assessing the performance of the controller, criteria(ISE, IAE and ITAE) are adopted. Then tuning formulae are derived using the tuned parameters sets, potential tuning rule models and another RCGA. A simulation work is carried out to verify the effectiveness of the proposed rules.

• 제어로봇시스템학회논문지
• /
• 제5권7호
• /
• pp.800-807
• /
• 1999

A Periodic disturbance canceller is proposed to compensate for the periodic disturbance due to cutting process in a CNC machining center. The periodic disturbance canceller estimates the Periodic disturbance without phase delay. This is achieved by using linear phase low-pass filter and frequency response reciprocal filter of plant at the frequency of the periodic disturbance. This method is implemented in the position control system of the CNC machining center with general disturbance compensators in order to compensate for both the frictional force and the periodic disturbance. The experimental results are described to show its effectiveness.

• 융합신호처리학회논문지
• /
• 제2권2호
• /
• pp.89-94
• /
• 2001

본 논문에서는 로봇 매니플레이터의 고속 동작시 위치 제어의 정확성을 감소시키는 다중 모드 오차 진동을 제거 할 수 있는 단순한 슬라이딩 모드 제어를 소개한다. 또한 시스템의 파라메터 변화와 외란으로 인해 슬라이딩 평면 조건의 깨짐을 방지하기 위해 신경망 학습 기능이 사용되어 진다. 그러므로 본 논문에서는 신경망을 이용한 슬라이딩 모드 제어시스템이 설계되고, 제안된 제어 시스템의 성능은 시뮬레이션 을 통해 증명된다.

• 한국통신학회논문지
• /
• 제29권9C호
• /
• pp.1252-1257
• /
• 2004

본 논문에서는 TITO 시스템에서 분산된 LQ-PID 제어기 설계방법을 제안하고,주파수 영역의 설계사양인 명령추종, 외란제거, 센서 잡음 저감도를 만족하도록 제어기를 설계하였다. 설계방법은 PID 제어요소를 포함한 폐루프 상태방정식과 LQR 폐루프 상태방정식의 관계를 유도하고 루프형성절차를 통해 가격함수의 가중치 요소 Q와 R을 선정함으로써 성능 및 안정도 강인성이 보장되도록 하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2079-2081
• /
• 2002

R/C helicopter has been used to several fields of military affairs, investigation searching and toys because it has small size hovering and vortical take-off characteristics etc. Therefore it needs more realizable control method. The paper introduces simulation and experimental results for control of a helicopter training simulator by self tuning control method. To realize the disturbance rejection and the given reference tracking, a least common multiple polynomial between the reference and disturbance model polynomials is operated to the plant model. The effectiveness of the method is shown by simulation and experimental results for a helicopter training simulator with two degree of freedom.

• 제어로봇시스템학회논문지
• /
• 제12권5호
• /
• pp.505-508
• /
• 2006

This paper presents a new analytical approach for designing multiloop PI controllers for disturbance rejection in multivariable processes with time delay. The proposed method is based on IMC-PID design approach. To overcome a sluggish load response by dominant pole in the process, the IMC filter is modified to compensate the dominant pole effect. Based on the modified IMC filter, an analytical tuning rule for multiloop PI controller is driven by extending the generalized IMC-PID method for single input/single output (SISO) systems [1] to multi input/multi output (MIMO) systems. Simulation results show that the proposed method gives a satisfactory load performance as well as servo performance in the multiloop system.

• 제어로봇시스템학회논문지
• /
• 제20권10호
• /
• pp.1023-1029
• /
• 2014

In this paper, we propose an SPDR (Smith Predictor for Disturbance Reduction) scheme to improve the temperature control by reduction of the disturbance in ROT process with measurement delay. The proposed controller is a combination of Astrom's modified Smith predictor with a disturbance reduction controller and a grey predictor. The grey prediction is used to calculate the inverse of the measurement delay and to predict future variations and tendencies of system output. The simulation results demonstrate the successful performance of the proposed disturbance reduction controller and enhance the robustness of the proposed control scheme.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.146-148
• /
• 2005

3상 PWM 컨버터는 전원전압과 동일한 위상의 전류를 인가할 수 있도록 스위칭 소자를 사용하여 고효율, 고역률을 얻을 수 있으며, 계통전원의 안정화와 유도장애 해소 등의 장점을 가지고 있다. 그러나 PWM 컨버터는 전원전압과 동상의 입력전류를 얻기 위해서는 전원전압센서와 전류센서를 필요로 하고 DC 링크단을 제어하기 위해서도 부가적인 하드웨어 구성이 필요하다. 이러한 센서들은 고가이며 신호의 검출시 각종 노이즈와 외란의 영향으로 신뢰성의 저하가 우려되므로 센서의 제거가 요구되고 있다. 본 논문은 상태관측기를 이용하여 전원전압과 위상각을 추정하는 센서리스 제어를 제안하였으며 3상 PFC 컨버터를 구성하여 시뮬레이션과 실험을 수행한 결과 전원전압 추정과 단위역률이 잘 이루어짐을 확인할 수 있었다.