• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.214-214
• /
• 2019

가뭄이 '심함' 단계 이상 도달 시에는 매주 수문분석을 수행하여 가뭄전망을 수행하여야 한다. 이를 위해서는 기상청의 강수량과 기온 등의 기상예측 자료가 필요하다. 현재 기상청에서는 3개월 기상전망으로 월단위 강수량과 평균기온을 매월 제공하고 있다. 1개월 전망에서 4주의 강수량합과 평균기온을 제공하고 있다. 하지만, 향후 4주간을 전망하는 1개월 전망에서는 1주단위의 강수량과 평균기온이 아닌, 4주간의 강수량합과 평균기온을 1주일 단위로 업데이트해 WINS에 제공하고 있다. 1주단위의 강수량과 평균기온을 취득하기 어려워, 평년 일단위 강수량과 평균기온 자료를 사용하여 4주간의 자료를 1주 단위로 분할하는 방법을 사용하였다. 주간단위 수문자료의 처리를 위해 국제표준기구(ISO)에서 제시하는 기준(ISO 8601)에 따랐다. ISO 8601은 월요일부터 일요일까지를 1주로 정의하며 현재 사용하고 있는 날짜체계와 1대1로 대응되도록 하였다. 예를 들면 1981년 2월 22일은 '1981-W07-7' 또는 '1981W077'로 표시한다. 표시된 형식은 1981년 7번째 주 일요일을 뜻한다. 이 기준에 따라 수문자료를 정리할 수 있도록 프로그램을 개발하였다. 주간 단위 잠재증발산량 계산은 월잠재증발산량 프로그램을 1주단위로 계산할 수 있도록 수정 및 보완하여 개발하였다. 수정 및 보완한 부분은 외기복사(外氣輻射)량 계산부분이다. 외기복사량은 지구가 태양을 1년 주기로 공전하므로 특정 위도에서 특정날짜에 따라 복사량이 달라지므로 주간단위의 월요일부터 일요일에 해당하는 날짜의 외기복사량을 각각 계산하고 이를 평균하여 주간단위 대푯값으로 사용하도록 하였다. 계산된 주간단위 외기복사량과 최고 최저기온을 입력하여 Hargreaves식에 의해 잠재증발산량을 계산한다. 융적설을 포함한 주단위 강우-유출 모형의 매개변수를 추정하기 위해 전국 24개 지점의 수문자료를 사용하였다. abcd 모형과 융적설모듈의 초기값 포함 11개 매개변수를 SCE-UA 전역최적화 알고리즘으로 추정하였다. 추정된 유역의 매개변수는 토양배수, 토양심도, 수문지질, 유역특성인자를 사용한 군집분석 결과에 의해 113개 중권역에 할당하였다. 개발된 주간단위 강우-유출 모형은 비교적 단기 가뭄전망을 위해 사용된다. 계산된 유량은 자연유량이며, 전국 취수장 수량, 하수처리장 방류수, 회귀수를 반영하여 지점별 유량을 계산하여 가뭄전망에 사용되고 있다.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1995.05a
• /
• pp.94-99
• /
• 1995

본 연구는 태양열 열펌프시스템에 의한 약 6평 규모의 실내의 난방방법으로서 간접 난방인 온수순환난방과 직접난방인 복사난방의 성능을 분석하였다. 태양열 열펌프의 최대의 열적성능을 나타낼 수 있도록 알루미늄 롤 본드형 태양열 집열기의 면적을 조절하였으며 집열효과를 극대화하기 위하여 온도감응 자동팽창밸브의 용량을 변화시켰다. 본 실험에서 적용된 태양열 열펌프 난방은 서울지방 봄 가을철의 외기온도에서 실내온도가 18~2$0^{\circ}C$로 유지되도록 설계제작되었다. 태양열 열펌프시스템에 적용된 작용유체는 온수순환 난방에는 R-12냉매. 그 대체냉매는 R-134a 및 혼합냉매, 복사난방에는 R-22냉매이었다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.6
• /
• pp.532-540
• /
• 2001

The objectives of this study are to analyze the control variables according to condensation occurrence, to find the range in floor surface temperature and frequency of condensation, and to evaluate the control methods through simulations when the radiant heating system is used for cooling. Through the simulation analysis the control methods such as on/off control, variable flow control and outdoor reset with indoor temperature feedback control are evaluated and compared. The results show that the lowest floor surface temperature is around $23^{\circ}C$, the surface condensation can be prevented by controlling indoor humidity within 20g/kg(DA0, and that outdoor reset with indoor temperature feedback control is more appropriate than on/off control and variable flow control with regard to prevention of the condensation and thermal comfort.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.11
• /
• pp.1165-1173
• /
• 2001

The objectives of this study are to analyze the application of radiant floor cooling and to evaluate the control methods through experiments when the radiant heating system is used for cooling. Through the experiment analysis the control methods such as on/off control, variable flow control and outdoor reset with indoor temperature feedback control are evaluated and compared. The cooling curve (reset ratio) is found for radiant cooling, which shows tole relation between outside air temperature and supply water temperature. Comparison of cooling methods shows that outdoor reset with indoor temperature feedback control is more appropriate than on/off control and variable flow control with regard to prevention of the condensation and thermal comfort.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.14 no.4
• /
• pp.13-19
• /
• 2018

The Effects of hot water supply temperature on indoor thermal characteristics for floor radiant heating system in residential apartment were researched by computer simulation. The parametric study on hot water supply temperatures with different outdoor air temperatures was done with regard to energy performance and control characteristics, respectively. As a result, the maximum overshoot of indoor air temperature and energy consumption were reduced by adjusting the hot water supply temperatures with outdoor air temperatures.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.5
• /
• pp.29-36
• /
• 2017

In this study, a numerical analysis is made of the fluid flow and heat transfer characteristics in the solar arrays of HALE (High Altitude Lond Endurance) UAV. In the stratosphere where UAV operates, high level solar radiation is induced, heat transfer decreases due to natural convection and forced convection is dominated by ambient flow. In order to predict the solar array temperature range in this environment condition, the conjugate heat transfer analysis was carried out for the solar arrays on the main wing. The investigation focused on the temperature distribution of solar array and heat transfer characteristics according to influence of solar energy, flight condition as vehicle speed, air density, temperature.

• Journal of Bio-Environment Control
• /
• v.15 no.4
• /
• pp.306-316
• /
• 2006

In this study, the effect of the shade level, water flow rate applied to the shades and the temperature of water on the greenhouse cooling was investigated depending on the shade level of 0, 35, 55, 75%, and water flow rate and water temperature by the test on the small wooden frames to find out the low cost cooling method. With increasing of the dry bulb temperature of outside air, the dry bulb temperature in the wooden frames increased. For the frames with the shade and water, inside temperatures of the frames were lower of -0.2$\sim$-1.2$^{\circ}C$ than the temperature of the outside air and higher than the water temperature. For the frames without water, inside temperatures of the frames were higher of 1.7$\sim$4$^{\circ}C$ than the outside and not affected by the shade level very much. The water flow rate and the temperature of the water were not the important factors to decrease the inside temperatures in the frames. The black globe temperature became lower with increasing of shade level. The shade frames with water curtain showed the best cooling effect because of reducing thermal radiation and cooling the plastic film cover. The surface temperatures of the plastic film cover for the water supplied modules became lower with increasing of the shade level. The relative humidity was decreased with the dry bulb temperature in the frame increasing and not affected by the dry bulb temperature of the outside air for the frames with the shade and water.

• Land and Housing Review
• /
• v.12 no.1
• /
• pp.129-137
• /
• 2021

External shading devices are well known solar control devices that can help reduce the cooling load of commercial buildings. For this study, experiments were conducted to examine the feasibility of shading devices in reducing both the cooling and heating loads. The influence of sky radiant cooling during winter was verified for the external shading device, internal roller blind, and window. Results can be summarized as follows. The temperature difference between the inner and outer surfaces of the window with the external shading device was 11.8℃ compared to 14.6℃ for one without the external shading device. This 2.8℃ difference was due to heat exchange by sky radiation when the surface temperature of the shading device was lower than the ambient outdoor air temperature. The roller blind resulted in a lower temperature of 0.8℃ compared to the average temperature of the window's air cavity. This was due to heat exchange by sky radiation of the roller blind surfaces. Without shading devices, the outside surface temperature of the window is about 3℃ higher. The study also found that when external shading devices were installed on both the southwest and southeast sides, the outside surface temperature of the windows were lower on the southwest side than the southeast side.

• The Korean Journal of Applied Statistics
• /
• v.30 no.6
• /
• pp.1005-1013
• /
• 2017

In this paper, we investigate the performances of time series models to forecast irradiance that consider weather variables such as temperature, humidity, cloud cover and Global Horizontal Irradiance. We first introduce the time series models and show that regression ARIMAX has the best performance with other models such as ARIMA and multiple regression models.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.12
• /
• pp.685-692
• /
• 2013

In this study, the control characteristics and effects of heating control methods on the heating performance and energy consumption of a hot-water heating control system of a residential apartment were researched by simulation and experiment. The purpose of this study is to evaluate operational strategies for improving an indoor thermal environment and reducing f energy consumption in the radiant floor heating system of a residential apartment.