• The Journal of the Korean bone and joint tumor society
• /
• v.14 no.2
• /
• pp.131-139
• /
• 2008

Purpose: Lipomatous tumor occurred in hand is very rare. There is a broad spectrum of lipomatous tumors including lipomas, variants of lipomas, lipomatosis, liposarcomas and so on. We report the clinical features of 11 cases of lipomatous tumor which occurred in hand. Materials and Methods: Between 1992 and 2008, 11 cases were histologically diagnosed as lipomatous tumor in hand. We reviewed all medical records and clinical photographs retrospectively and ascertained recurrence by telephone interview. Results: Eight cases were ordinary lipomas. Three cases were angiolipoma, fibrolipoma and atypical lipoma respectively. Four cases occurred in finger, two cases in thenar area, two cases in hypothenar area, one case in palm, two cases in wrist. All cases were situated on volar surface. All patients complained of palpable masses. One patient with subungal angiolipoma felt pain. There was no neurologic sign or vascular symptom preoperatively. In one case, postoperative complication (hypoesthesia in $5^{th}$ finger) was developed. There was no local recurrence. Conclusion: In our study, lipomatous tumors occurred in hand did not recur. Patients mainly complained of feeling of lump. Pain was uncommon symptom. Postoperative complication was rare if operation was performed carefully.

• Journal of the Korean Orthopaedic Association
• /
• v.53 no.6
• /
• pp.466-477
• /
• 2018

Orthopaedics is an area where 3-dimensional (3D) printing technology is most likely to be utilized because it has been used to treat a range of diseases of the whole body. For arthritis, spinal diseases, trauma, deformities, and tumors, 3D printing can be used in the form of anatomical models, surgical guides, metal implants, bio-ceramic body reconstruction, and orthosis. In particular, in orthopaedic oncology, patients have a wide variety of tumor locations, but limited options for the limb salvage surgery have resulted in many complications. Currently, 3D printing personalized implants can be fabricated easily in a short time, and it is anticipated that all bone tumors in various surgical sites will be reconstructed properly. An improvement of 3D printing technology in the healthcare field requires close cooperation with many professionals in the design, printing, and validation processes. The government, which has determined that it can promote the development of 3D printing-related industries in other fields by leading the use of 3D printing in the medical field, is also actively supporting with an emphasis on promotion rather than regulation. In this review, the experience of using 3D printing technology for bone tumor surgery was shared, expecting orthopaedic surgeons to lead 3D printing in the medical field.

• Journal of The Korean Society of Inherited Metabolic disease
• /
• v.18 no.3
• /
• pp.99-106
• /
• 2018

Mucolipidosis type III (pseudo-Hurler polydystrophy) is a mucolipids degrading disorder caused by a mutation in the GNPTAB gene and is inherited by autosomal recessive. It is diagnosed by examining highly concentrated mucolipids in blood and the diagnosis can be confirmed by genetic testing. Mucolipidosis type III is a rare and progressive metabolic disorder. Its initial signs and symptoms usually occur around 3 years of age. Clinical manifestations of the disease include slow growth, joint stiffness, arthralgia, skeletal abnormalities, heart valve abnormalities, recurrent respiratory infection, distinctive facial features, and mild intellectual disability. Here, we are presenting two siblings of mucolipidosis type III, a 4-year-old female and a 2 years and 7 months old male with features of delayed growth and coarse face. The diagnosis was confirmed by [c.2715+1G>A(p.Glu906Leufs*4), c.2544del(p.Glu849Lysfs*22)] mutation in targeted gene panel sequencing. In this case, c.2544del is a heterozygote newly identified mutation in mucolipidosis type III and was not found in the control group including the genome aggregation database. And it is interpreted as a pathogenic variant considering the association with phenotype. Here, we report a Korean mucolipidosis type III patients with novel mutations in GNPTAB gene who have been treated since early childhood. Owing to recent development of molecular genetic techniques, it was possible to make early diagnosis and treatment with pamidronate was initiated appropriately in case 1. In addition to these supportive therapies, efforts must be made to develop fundamental treatment for patients with early diagnosis of mucolipidosis.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.38 no.4
• /
• pp.12-24
• /
• 2020

The purpose of this study is to analyze the influence of the water system on the location, spatial structure, and construction method of Hongju-eupseong, centering on Hongjumok-eupchi. During the Joseon Dynasty, the water system in Hongjumok-eupchi is composed of artificially constructed Seong-an Runnel and ponds based on a branch-shaped natural waterways flowing from south to north and west to east. Compiling the results of various literature records, excavations and analysis of map data, it can be seen that the water system has an important influence on the construction of Hongju-seong. Firstly, Hongju-seong from the Goryeo Dynasty to the late Joseon Dynasty is located using a circular shape of topographical structure and a small erosion basin formed on the inner side of the Hongseongcheon and Wolgyecheon streams without significant change in location. In particular, Wolgyecheon and Hongseongcheon are natural moats, which are harmonized with Sohyangcheon and riverside topographical structures, affecting the location and construction method of Hongju-seong, water related facilities, and the spatial structure of eupseong. It is understood that location characteristic of Hongju-seong reflects the urban location structure harmonized with waterways in ancient China and Korea. Secondly in harmony with the water system and topographic structure of Hongju-seong, it is an important factor in deciding the land use of the town, the arrangement of the town hall facilities and inducing various non-subsidiary measures such as the establishment of embankment forest with a secret function and the closure of the south gate. In addition, artificial drainage facilities such as Seongan runnel and ponds are being actively introduced from early on to protect the walls or towns from flooding of Wolgyecheon. Especially there were typical methods for protecting the walls from water damage such as the Joseon Dynasty stone castle structure that was integrated with saturn(soil wall) in the Goryeo Dynasty, retreating wall in the northern gate area in the late Joseon Dynasty, and the method of constructing wall using korean tile and stone floors between reinforced soil layers in the western and northern wall.

• Journal of Periodontal and Implant Science
• /
• v.37 no.sup2
• /
• pp.447-463
• /
• 2007

Periodontal ligament (PDL) cells have been known as multipotential cells, and as playing an important rolesin periodontal regeneration. The PDL cells are composed of heterogeneous cell populations which have the capacity to differentiate into either cementoblasts or osteoblasts, depending on needs and conditions. Therefore, PDL cells have the capacity to produce mineralized nodules in vitro in mineralization medium which include ascorbic acid, ${\beta}$-glycerophosphate and dexamethasone. In spite of these well-known osteoblast like properties of PDL cells, very little is known about the molecules involved in the formation of the mineralized nodules in the PDL cells. In the present study, we analysed gene-expression profiles during the mineralization process of cultured PDL cells by means of a cDNA microarray consisting of 3063 genes. Nodules of mineralized matrix were strongly stained with alizarin red S on the PDL cells cultured in the media with mineralization supplements. Among 3,063 genes analyzed, 35 were up-regulated more than two-fold at one or more time points in cells that developed matrix mineralization nodules, and 38 were down-regulated to less than half their normal level of expression. In accord with the morphological change we observed, several genes related to calcium-related or mineral metabolism were induced in PDL cells during osteogenesis, such as IGF-II and IGFBP-2. Proteogycan 1, fibulin-5, keratin 5, ,${\beta}$-actin, ${\alpha}$-smooth muscle actin and capping protein, and cytoskeleton and extracellular matrix proteins were up-regulated during mineralization. Several genes encoding proteins related to apoptosis weredifferentially expressed in PDL cells cultured in the medium containing mineralization supplements. Dkk-I and Nip3, which are apoptosis-inducing agents, were up-regulated, and Btf and TAXlBP1, which have an anti-apoptosis activity, were down-regulated during mineralization. Also periostin and S100 calciumbinding protein A4 were down-regulated during mineralization.

• Journal of Biomedical Engineering Research
• /
• v.25 no.1
• /
• pp.11-19
• /
• 2004

Stage 1 sleep provides important information regarding interpretation of nocturnal polysomnography, particularly sleep onset. It is a short transition period from wakeful consciousness to sleep. Lack of prominent sleep events characterizing stage 1 sleep is a major obstacle in automatic sleep stage scoring. In this study, we attempted to utilize simultaneous EEC and EOG processing and analyses to detect stage 1 sleep automatically. Relative powers of the alpha waves and the theta waves were calculated from spectral estimation. Either the relative power of alpha waves less than 50％ or the relative power of theta waves more than 23％ was regarded as stage 1 sleep. SEM (slow eye movement) was defined as the duration of both eye movement ranging from 1.5 to 4 seconds and regarded also as stage 1 sleep. If one of these three criteria was met, the epoch was regarded as stage 1 sleep. Results f ere compared to the manual rating results done by two polysomnography experts. Total of 169 epochs was analyzed. Agreement rate for stage 1 sleep between automatic detection and manual scoring was 79.3％ and Cohen's Kappa was 0.586 (p＜0.01). A significant portion (32％) of automatically detected stage 1 sleep included SEM. Generally, digitally-scored sleep s1aging shows the accuracy up to 70％. Considering potential difficulties in stage 1 sleep scoring, the accuracy of 79.3％ in this study seems to be robust enough. Simultaneous analysis of EOG provides differential value to the present study from previous oneswhich mainly depended on EEG analysis. The issue of close relationship between SEM and stage 1 sleep raised by Kinnariet at. remains to be a valid one in this study.

• The Journal of the Korean bone and joint tumor society
• /
• v.4 no.1
• /
• pp.13-21
• /
• 1998

Taxol, the extract from the Taxus brevifolia which is a Pacific yew tree has aroused the interest of the tumor investigators since the 1960s. As well, it is shown to have broad antitumor activity in preclinical experimental models. Its action mechanism is an anti-microtubule effect by duplication of tubulin. The most impressive antitumor activity of taxol has been observed in advanced ovarian cancer and metastatic breast cancer. The purpose of this study was to determine how taxol acts on malignant bone tumor cell lines, to compare its cytotoxic effect with those of other chemotherapeutic agents, and to ascertain the its combination effect with adriamycin. Cell lines used in this study were G-292(osteosarcoma, human), SaOS-2(osteosarcoma, primary, human), and HT-1080(fibrosarcoma, human). Methotrexate, adriamycin, cisplatinum, ifosfamide and taxol were used as testing chemotherapeutic agents and their maximum test concentration were $500{\mu}g/ml$, $200{\mu}g/ml$, $500{\mu}g/ml$, $1000{\mu}g/ml$, and $600{\mu}g/ml$, respectively. The media for cell culture was RPMI-1640 with 10% fetal bovine serum and gentamycin. The results were as follows. The $IC_{50}$ of methotrexate, ifosfamide, cisplatinum, adriamycin and Taxol in G-292 were $2.3{\times}10^{-1}{\mu}g/ml$, $8.0{\times}10^0{\mu}g/ml$, $3.5{\times}10^0{\mu}g/ml$, $9.8{\times}10^{-1}{\mu}g/ml$, $2.7{\times}10^{-2}{\mu}g/ml$ respectively, in SaOS-2 $3.5{\times}10^{-1}{\mu}g/ml$, $1.5{\times}10^1{\mu}g/ml$, $2.8{\times}10^0{\mu}g/ml$, $9.9{\times}10^{-2}{\mu}g/ml$, $1.0{\times}10^{-2}{\mu}g/ml$, respectively, in HT-1080 $4.2{\times}10^{-2}{\mu}g/ml$, $5.4{\times}10^1{\mu}g/ml$, $3.8{\times}10^0{\mu}g/ml$, $5.5{\times}10^{-3}{\mu}g/ml$, $1.1{\times}10^{-3}{\mu}g/ml$, respectively. In conclusion, taxol had very potent cytotoxic effect on the malignant bone tumor cell lines with adriamycin, and was more potent than methotrexate, cisplatinum and ifosfamide. There were synergistic antitumor effects on G-292 and SaOS-2 cell lines in combination test of taxol and adriamycin. From the above results, it would be estimated that taxol could be a new antitumor drug for the malignant bone tumors, providing measures against the side effects and followed by the clinical tests.

• Fashion & Textile Research Journal
• /
• v.24 no.6
• /
• pp.667-685
• /
• 2022

This paper aims to investigate 4D printing materials for soft robots. 4D printing is a targeted evolution of the 3D printed structure in shape, property, and functionality. It is capable of self-assembly, multi-functionality, and self-repair. In addition, it is time-dependent, printer-independent, and predictable. The shape-shifting behaviors considered in 4D printing include folding, bending, twisting, linear or nonlinear expansion/contraction, surface curling, and generating surface topographical features. The shapes can shift from 1D to 1D, 1D to 2D, 2D to 2D, 1D to 3D, 2D to 3D, and 3D to 3D. In the 4D printing auxetic structure, the kinetiX is a cellular-based material design composed of rigid plates and elastic hinges. In pneumatic auxetics based on the kirigami structure, an inverse optimization method for designing and fabricating morphs three-dimensional shapes out of patterns laid out flat. When 4D printing material is molded into a deformable 3D structure, it can be applied to the exoskeleton material of soft robots such as upper and lower limbs, fingers, hands, toes, and feet. Research on 4D printing materials for soft robots is essential in developing smart clothing for healthcare in the textile and fashion industry.