• Title/Summary/Keyword: 왕복차

Search Result 50, Processing Time 0.032 seconds

A new formulation for unsteady heat transfer of oscillatory flow in a circular tube (원관내 왕복유동에서 비정상 열전달 관계식의 공식화)

  • Park, Sang-Jin;Lee, Dae-Yeong;No, Seung-Tak
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.20 no.9
    • /
    • pp.2953-2964
    • /
    • 1996
  • Heat Transfer with periodic fluctuation of fluid temperature caused by oscillatory flow or compression expansion can be out of phase with balk fluid-wall temperature difference. Newton's law of convection is inadequate to describe this phenomenon. In order to solve this problem the concept of the complex Nusselt number has been introduced by severla researchers. The complex Nusselt number expresses out of phase excellently while the first harmonic is dominant in the variations of both fluid-wall temperature difference and heat flux. However, in the case of oscillatory flow with non-linear wall temperature distribution, the complex Nusselt number is not appropriate to predict the heat transfer phenomena since the higher order harmonic components appear in periodic temperature variation. Analytic solutions to the heat transfer with an sinusoidal well temperature distribution were obtained to investagate the effect of non-linear wall temperature distribution. A new formula considering the thermal boundary layer was suggested based on the solutions. A comparison was also made with the complex Nusselt number. It was verified that the new formula describes well the heat transfer of oscillating flow even if the first harmonic component is not dominant in the fluid-wall temperature difference.

Experimental investigation on the heat transfer characteristics of an oscillatory pipe flow (원관 내 왕복유동에 따른 열전달특성의 실험적 연구)

  • Park, Sang-Jin;Lee, Dae-Yeong;No, Seung-Tak
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.20 no.6
    • /
    • pp.1959-1970
    • /
    • 1996
  • Effects of oscillatory flow upon heat transfer characteristics have been studied experimentally for oscillating flow in a circular tube. The experimental apparatus was designed to simulate the heat exchangers of the Stirling or Vuilleumier cycle machines and the test section consists of heater and cooler. Measurements were presented of heat flux, axial wall temperature distribution, and radial temperature profile of the working fluid for several cases of oscillation frequency and swept distance ratio. The influences of two main parameters, frequency and tidal displacement of the oscillation were investigated. Then the heat transfer coefficient at the heater is obtained. The carried by the authors with a assumption of oscillatory laminar slug flow.

Adjustment of 1st order Level Network of Korea in 2006 (2006년 우리나라 1등 수준망 조정)

  • Lee, Chang-Kyung;Suh, Young-Cheol;Jeon, Bu-Nam;Song, Chang-Hyun
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • v.26 no.1
    • /
    • pp.17-26
    • /
    • 2008
  • The 1st order level network of Korea was adjusted simultaneously in 1987. After that, the 1 st order level network of Korea was adjusted simultaneously by National Geographic Information Institute in 2006. The levelling data were acquired by digital level with invar staff from 2001 through 2006. The 1st order level network consists of 36 level lines. Among them, 34 level lines comprise 11 level loops. Among 36 level lines, 4 level lines have fore & back error larger than the regulations for the 1st order levelling of NGII, Korea. Also, the closing error of 3 loops of level network exceed the regulation for the 1st order levelling of NGII. The standard error of fore and back leveling between bench marks(${\eta}_1$) are distributed between 0.2 $mm/{\surd}km$ and 1.7 $mm/{\surd}km$. The standard error of loop closing(${\eta}_2$) is 2.0 $mm/{\surd}km$. This result means that the 1st order level network of Korea qualifies for the high precision leveling defined by International Geodetic Association in 1948. As the result of the 1st order level network adjustment, the reference standard error($\hat{{\sigma}_0}$) of the level network was 1.8 $mm/{\surd}km$, which is twice as good as that of the 1st adjustment of level networks in 1987.

A Timer-based TCP Congestion Control Mechanism for Enhancing Throughput and Fairness (전송률과 공평성 향상을 위한 타이머 기반 TCP혼잡 제어)

  • Lee, Jong-Min;Cha, Ho-Jung
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2005.11a
    • /
    • pp.154-156
    • /
    • 2005
  • 본 논문은 TCP의 무선 환경에서의 전송 성능 감소와 패킷 왕복 시간에 따른 대역폭 선점 문제를 해결하기 위한 타이머 기반의 혼잡 제어 방식을 제안한다. TCP는 패킷 손실 확률이 많은 무선 환경에서 네트워크 혼잡에 의한 패킷 손실을 방지하기 위한 느린 전송률 증가로 인해 전송 성능이 크게 떨어진다. 또한, TCP 송신자는 전송률을 결정하는 전송 윈도우를 수신자로부터 응답 메시지를 받을 때만 조정시키므로, 패킷의 왕복 시간의 차이에 따른 전송률 편중 현상과 다수개의 응답 메시지에 의한 과도한 트래픽 발생의 문제가 발생한다. 본 논문에서 제안하는 타이머 기반의 TCP 혼잡 제어 방식은 패킷의 전송 시간 간격을 타이머로 조정함으로써 무선 환경에서 전송 성능을 향상시키고 패킷의 왕복 시간 차이에 따른 전송률 편중 현상을 완화시키며 다수개의 응답 메시지에 의한 과도한 트래픽의 발생을 제한한다. 제안하는 방법은 실제 환경에서 구현되었으며, 다양한 네트워크 환경에서의 실험을 통해 그 성능을 입증하였다.

  • PDF

Development of Rustling Sound Generator Using Reciprocating Motion and Evaluation of Its Fabric Sound (왕복운동에 의한 직물마찰음발생장치의 개발 및 이를 이용한 직물소리 평가)

  • Kim Chun-Jeong;Cho Gil-Soo
    • Science of Emotion and Sensibility
    • /
    • v.9 no.2
    • /
    • pp.133-140
    • /
    • 2006
  • In order to investigate the sensation of the fabric sound simulating the real wear-condition, the fabric sound simulator using reciprocating friction was developed. Fabric sounds from 5 specimen were generated by the fabric sound simulator and recorded using high performance microphone. Physical sound parameters of fabrics including level pressure of total sound (LPT), level range (${\Delta}L$), and frequency differences (${\Delta}f$) were calculated. For psychological evaluation, seven adjectives for sound (softness, loudness, sharpness, clearness, roughness, highness, and pleasantness) were used as the semantic differential scale. Fabric sounds by reciprocating friction of nylon taffeta and polyester leno had the highest value of LPT and evaluated as loud, sharp, rough, and unpleasant while polyester ultra suede and silk crepe de chine haying the lower LPT and ${\Delta}f$ were perceived as soft and quite. Comparing with fabric sound by one-way friction, fabric sound by reciprocation friction was perceived as more sharp, loud, and rough. LPT was also the most important factor affecting the sensation of the fabric sound by reciprocating friction.

  • PDF

A Localization Using Multiple Round Trip Times in Wireless Sensor Networks (무선 센서 네트워크에서 다중 왕복시간차를 이용한 위치측정)

  • Jang, Sang-Wook;Ha, Rhan
    • Journal of KIISE:Information Networking
    • /
    • v.34 no.5
    • /
    • pp.370-378
    • /
    • 2007
  • In wireless sensor networks (WSNs), thousands of sensors are often deployed in a hostile environment. In such an environment, WSNs can be applied to various applications by using the absolute or relative location information of the sensors. Until now, the time-of-arrival (TOA) based localization method has been considered most accurate. In the TOA method, however, inaccuracy in distance estimation is caused by clock drift and clock skew between sensor nodes. To solve this problem, several numbers of periodic time synchronization methods were suggested while these methods introduced overheads to the packet traffic. In this paper, we propose a new localization method based on multiple round-trip times (RTOA) of a signal which gives more accurate distance and location estimation even in the presence of clock skew between sensor nodes. Our experimental results show that the Proposed RTOA method gives up to 93% more accurate location estimation.

An Experimental Study on Convection Heat Transfer in an Oscillating Flow of a Heater Tube for Stirling Cycle Machines (스터링 사이클기기용 가열기 원관내부 왕복유동에서의 열전달에 관한 실험적 연구)

  • 강병하;이건태;이춘식;이재헌
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.17 no.6
    • /
    • pp.1547-1555
    • /
    • 1993
  • An experimental study on convection heat transfer characteristics from a heated tube to an oscillating flow has been carried out, . This problem is of particular interest in the design of heat exchangers in Stirling cycle machines. Experimental system has been developed to measure temporal variations of temperature inside a heater tube during oscillating modes in a Stirling cycle machine. The dependence of temperature distributions and heat transfer rates on the oscillating frequency as well as the swept volume ratio and the mean pressure of a Stirling cycle machine is investigated in detail. The experimental results indicate that the measured temporal variations of temperature become nearly sinusoidal. The amplitude of temperature variation in the core of the tube is much more substantial than that near the tube wall, whereas the reverse is true for pulsating flows. It is also found that the heat transfer rate is increased significantly as the oscillating frequency or oscillating amplitude or the mean pressure in a tube is increased.

과학리포트

  • Lee, Gwang-Yeong
    • The Science & Technology
    • /
    • v.30 no.11 s.342
    • /
    • pp.16-19
    • /
    • 1997
  • 미국을 비롯한 선진국들이 우주의 신비를 캐기 위한 탐사작업에 열을 올리고 있다. 미국은 지난 7월 우주선 패스파인더호를 발사, 화성표면에 착륙시켜 화성의 생생한 자료를 지구로 보내온 것을 계기로 2005년에는 화성 왕복선을 발사하고 2010년에는 인간이 직접 화성을 방문하는 계획을 실현할 계획이다. 또 미국과 러시아는 차세대 우주정거장 '알파'를 내년에 발사하기로 했다. 더욱 활발해진 우주개발의 현황을 알아본다.

  • PDF

파와 해류에 의한 토사이동

  • 유동훈
    • Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
    • /
    • 1995.10a
    • /
    • pp.51-56
    • /
    • 1995
  • 일방향 흐름에 표면파가 중복하여 작용할 때 해저면 마찰력의 증가로 토사이동량의 증대가 예상된다. 표면파는 왕복운동 특성을 갖고 있으며, 유속과 해저전단력간의 위상차와 해저잔단력과 토사이동발생 시각간의 위상차가 존재하기 때문에 토사이동량 산정에 많은 어려움이 따른다. 그러나 이렇게 복잡한 현상이 내포되어 있음에도 불구하고 일반적인 기법으로 하천 토사이동량 산정식을 수정하거나 비례상수를 재조정하여 파와 해류에 의한 토사이동량을 산정해 왔다. (중략)

  • PDF