• Journal of the Korean Geotechnical Society
• /
• v.18 no.6
• /
• pp.5-16
• /
• 2002

A hydrogeomechanical numerical model is presented to evaluate rainfall impacts on groundwater flow in slopes and slope stability. This numerical model is developed based on the fully coupled poroelastic governing equations for groundwater flow in deforming variably saturated geologic media and the Galerkin finite element method. A series of numerical experiments using the model developed are then applied to an unsaturated slope under various rainfall rates. The numerical simulation results show that the overall hydromechanical slope stability deteriorates, and the potential failure nay initiate from the slope toe and propagate toward the slope crest as the rainfall rate increases. From the viewpoint of hydrogeology, the pressure head and hence the total hydraulic head increase as the rainfall rate increases. As a result, the groundwater table rises, the unsaturated zone reduces, the seepage face expands from the slope toe toward the slope crest, and the groundwater flow velocity increases along the seepage face. From the viewpoint of geomechanics, the horizontal displacement increases, and the vertical displacement decreases toward the slope toe as the rainfall rate increases. This may result from the buoyancy effect associated with the groundwater table rise as the rainfall rate increases. As a result, the overall deformation intensifies toward the slope toe, and the unstable zone, in which the factor of safety against shear failure is less than 1, becomes thicker near the slope toe and propagates from the slope toe toward the slope crest. The numerical simulation results also suggest that the potential tension failure is likely to occur within the slope between the potential shear failure surface and the ground surface.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.4763-4768
• /
• 2014

Recently, aluminum pipes have been used instead of steel pipes for open and shut machines in vinyl housing because of its corrosion-resistance and light weight. In particular, the light weight is very useful for fitting and removal by human resources. On the other hand, an aluminum pipe is weak in winter because aluminum has a larger thermal expansion coefficient than steel. This study examined the freezing and bursting of aluminum pipes by numerical analysis. The mechanical-thermal deformation characteristics were analyzed under the condition of ice volumetric expansion in aluminum pipes reaching 50%. From numerical analysis, large stresses above the yield stress occurred in aluminum pipe after ice expanded in the net diameter immediately. In addition, the freezing and bursting of aluminum pipes was predicted around an ice volumetric expansion of 6 - 7% because the thickness of the aluminum pipe reached an aluminum elongation ratio of 17%. Therefore, it is recommended that aluminum pipes be sealed perfectly to prevent water flow in the pipe. These results suggest that it is very difficult to prevent freezing and bursting of aluminum pipes by water freezing in the pipe.

• Korean Journal of Animal Reproduction
• /
• v.22 no.2
• /
• pp.171-176
• /
• 1998

This study was carried out to confirm whether the in vivo developmental potential of mouse hatched blastocysts (HBs) can be obtained by vitrification method using the cryoprotectant EFS35. The HBs ($\theta$ 130$\mu\textrm{m}$) were cultured in vitro until day 5 from zygotes produced in vivo and were equilibrated in 10% ethylene glycol(EG) for 5 min, and then were exposed or vitrified in EFS35 (35% EG, 18% Ficoll and 0.3M sucrose). After 30 min thawing, re-expanding HBs were transferred into one or both uterine horns of pseudopregnant recipients on day 3 (4~6 embryos /horn). Pregnancy rates of recipients and implantation were assessed by autopsy on day 15 of gestation. The results obtained in these experiments were summarized as follows : After thaw-ing, in vitro survival of HBs was not significantly different between exposed (65.5%) and vitrified(54.5%) group. Also, when the in vivo development potential was examined, total implantation was not different between control (58.5% ) and vitrified (41.0%) group, although the live fetus formation of vitrified group (24.0%) was significantly lower than that of control (58.3%) group (p< 0.05). These results suggested that vitrification freezing method of mouse HBs using EFS35 can be used to make wide the utility of embryo transfer of the more embryos produced in vitro.

• Korean Journal of Animal Reproduction
• /
• v.23 no.2
• /
• pp.141-148
• /
• 1999

This study was to test whether the viability of bovine hatched blastocysts (HBs) can be maintained after vitrification and thawing. The HBs were produced in vitro at Day 9 and Day 10 after IVF, and they were classified to small (S-HBs; ø$\leq$300 ${\mu}{\textrm}{m}$) and large(L-HBs; ø＞300 ${\mu}{\textrm}{m}$) on the basis of embryo diameter using eyepiece micrometer. As freezing solution, we used EFS35 which consisted of 35% ethylene glycol (EG), 18% ficoll, 0.3 M sucrose and 10% FBS added in mDPBS. Vitrification was taken by two-step method, the HBs were equilibrated in 10% EG for 5 minutes and then shortly exposed in EFS35 and plunged into L$N_2$for 30~45 sec. After thawing, the survival rates were assessed by the re-expansion of the blastocoel during 2 h and 16 h of culture. The results obtained in these experiments were summarized as follows; 1) When the blastocysts(40.8%) recovered at Day 8 after IVF were further cultured for 24 h(Day 9 after IVF) and 48 h(Day 10 after IVF), the rates of HBs were 20.5% and 6.7%, respectively. Also, the total cell number of HBs on Day 9 was significantly higher than that of HBs on Day 10 (p＜0.01). 2) When the effects of freezing solution to the survival of Day 9 L-HBs were examined, the rate of vitrified group (75.7%) was significantly lower than 100% of control and exposed group(p＜0.05). 3) When the survival rates of vitrified HBs according to size and developmental age were examined, the data of L-HBs (75.5%) and S-HBs(63.6%) on Day 9 were slightly higher than those of L-HBs(64.3%) and S-HBs(60.7%) on Day 10. 4) Also, when the in vitro survival of Day 9 HBs was evaluated under different culture condition after thawing, the result in culture medium only (79.3%) was significantly higher than 43.2% in co-culture group (p＜0.05). These results demonstrated that bovine HBs can be successfully cryopreserved by two-step vitrification method using EFS35.

• Journal of the Mineralogical Society of Korea
• /
• v.15 no.4
• /
• pp.243-257
• /
• 2002

Ca-type and Na-type bentonites show the great difference of some physicochemical properties. Na exchanged bentonite is mainly used for the foundry and construction materials in domestic utilization. This study tries to identify in detail the differences of some physicochemical properties and thermal properties between Ca-type and Na-type bentonites. Also the adsorption behavior and interlayer expansion for the HDTMA (Hexadecyltrimethylammonium) exchanged and CP (Cetylprydinium) exchanged Ca-type and Na-type bentonites were compared. Na-type bentonite shows the strong alkaline property, high viscosity and swelling compared to Ca-type bentonite. However, two types are very similar for the cation exchange capacity and MB (Methylene Blue) adsorption. The decomposition of adsorbed and interlayer water of Na-type bentonite is caused in the lower temperature than Ca-type bentonite. And Ca-type bentonite shows the decomposition of structural water in the lower temperature than Na-type bentonite. The interlayer expansion of montmorillonite resulted to the intercalation of HDTMA and CP into bentonite is so strongly caused from 12～15 $\AA$ to $40\AA$ (basal spacing). HDTMA-bentonite is almost expanded to $37～38\AA$ when 200% CEC equivalent amount of HDTMA is added, and CP-bentonite is fullly expanded to 40 $\AA$ in the 140% CEC equivalent amount of CP It means that CP causes the stronger interlayer expansion of montmorillonite and easier adsorption than HDTMA. Adsorption behaviors of CP into bentonite is so stable and continuously sorbed in the proportion to the treatment of amount until 200% of the CEC equivalents. CP-bentonite shows the same adsorption behavior regardless of Ca-type or Na-type montmorillonite.

• Journal of Chest Surgery
• /
• v.39 no.5 s.262
• /
• pp.394-398
• /
• 2006

Background: Goal of the initial treatment of primary spontaneous pneumothorax is re-expansion of the lung by evacuation of air from pleural space. Authors thought small caliber catheter could reach to this goal instead of conventional large bore chest tube. This retrospective study was undertaken to assess the effectiveness of 7-French (Fr) catheter for the initial treatment of primary spontaneous pneumothorax. Material and Method: Between May 2003 and April 2005, 111 patients with primary spontaneous pneumothorax were managed with tube drainage; 7 Fr catheter for 86 patients and 24-French chest tube for 25 patients. We analyzed catheter indwelling time, use of analgesics, re-expansion of the lung, and catheter related problems by medical records. Result: Mean catheter indwelling time was $2.4{\pm}1.1$ days in 7 Fr group and $2.3{\pm}1.3$ days in chest tube group (p>0.05). All patients with 24 Fr catheter needed analgesics injection but never in 7Fr group. Complete re-expansion of the lung based on plane chest radiograph was obtained in 77% of 7 Fr group. The problem related with 7 Fr catheter was kinking, which showed in 5.6%. Conclusion: Application of the 7 Fr catheter for initial management of primary spontaneous pneumothorax was as effective as 24 Fr catheter.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1283_1284
• /
• 2009

본 연구는 에폭시-층상실리케이트 나노콤포지트 분산을 위해 여러 분산기법을 적용한 경우이다. 층상실리케이트는 층상과 층상사이로 고분자체인의 삽입으로 층과 층사이가 팽창되어 지는 특성을 갖고 있다. 층상실리케이트 나노콤포지트가 완전한 박리가 일어나게 되면 전반적인 물성의 향상이 동반 상승되는 특성을 갖고 있다. 이런 이유로 homogenizer를 이용한 분산특성실험에서는 삽입되는 정도만을 확인할수있었고, 최적 시간/속도특성을 구할수 있었다. 또한 초음파 분산법으로 나노콤포지트가 박리가 일어나는 경우 존재하였고, 그 조건에 대한 최적특성을 구할 수 있었다.

• Journal of Chest Surgery
• /
• v.34 no.5
• /
• pp.418-421
• /
• 2001

53세 남자 환자가 객혈을 주소로 입워하여 우축 상엽 편평상피세로 폐암으로 진단 받았다. 캄퓨터 단층촬영상 하부 기관에 종양의 침윤이 의심되었다. 우측 하엽과 중엽을 보존하기 위해서 우측상엽과 하부 기관외측을 포함하여 절제하는 기관기관지 성형술 시행하였고, 수술후 우측 폐의 팽창은 완전하였다. 수술 후 1주일째 시행한 기관지 내시경 검사상 우측 중엽과 하엽의 기관지는 뒤틀림 없이 잘 유지되어 있었다. 수술 후 항암치료와 방사선 치료를 받고 현재 환자는 수술 후 1년 7개월 동안 외래 추적관찰 중이다. 저자들은 우측 상엽의 폐암이 기관 하부를 침범한 경우에 우측 기관 소매 전폐절제술의 합병증을 피하고 환자의 폐기능을 보조하면서 침윤된 우측상엽을 포함하여 절제하는 기관기관지 성형술을 시행하여 이에 보고하는 바이다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.18 no.4
• /
• pp.94-101
• /
• 1994

실험 데이터는 급확대비 3:1 팽창의 시험관에서의 실험결과를 나타내고 있으며, 실험에 이용된 동작유체로써는 공기가 사용되었다. 입구관에서 레이놀즈수는 60,000으로부터 120,000까지 변하게 하였고, 스월강도는 0으로부터 16까지 변화되게 하였다. 균일한 열 플럭스 경계조건이 사용되었는데, 그 결과 관벽온도 및 체적온도는 24$^{\circ}C$로부터 71$^{\circ}C$까지에 걸쳐 나타났다. 플롯상에 국소 Nusselt수는 최대 열전달점에서 정점을 이루는 모습을 보여 주고 있다. 스월강도가 0으로부터 최대값으로 증가 되었을때, 최고 Nusselt수의 위치는 시험관에서 4로부터 1스텝 하이트로 변경되는 것이 조사되었다. 이러한 최대 Nusselt수의 상류부 이동은 완전 발달된 유동에서의 값보다 2.2배에서 8.8배나 많은 그의 크기를 증가시킨다고 할 수 있다.

• Applied Chemistry for Engineering
• /
• v.10 no.8
• /
• pp.1104-1108
• /
• 1999

In this study it was focused that if the chrome could be removed in the shaving dust, the reusable protein resource could be recycled from the shaving dust. As the chrome forms a Cr-collagenate by cross linking of collagen in the shaving dust, the dust was steeped for swelling and plumping by $Ca(OH)_2$ solution and then chromium in dust was resolved out by $H_2SO_4$ solution in the first stage process. In the second stage one, dust was swelled and plumped by NaOH solution and then the chromium in dust was oxygenated to a hexavalent chrome, which has high solubility in $H_2O_2$ solution. And then the chromium was removed byt he steeping of $H_2SO_4$ solution as the last process. The first stage process was consisted of the sequential steeping of 3%-$Ca(OH)_2$ and $0.8%-H_2SO_4$. In the second stage the total chrome was effectively removed by the sequential steeping of 0.1%-NaOH, $3%-H_2O_2$ and $1%-H_2SO_4$. In the completely dechromated dust, the humidity was measured as 10.68% and the crude protein was contained by 79.81%. Steeping solutions were reused 3 times for chrome removal process, the chrome was entirely removed in shaving dust.