• Korean Journal of Labor Studies
• /
• v.19 no.1
• /
• pp.261-293
• /
• 2013

Sweden invited immigrant workers, mainly from Nordic countries and West European countries until the 1960s. But since the 1970s refugees and their family members have become the largest group of immigrants. As the composition of immigrants has changed significantly, and the labor market conditions have been aggravated, immigrants have had much difficulty in finding jobs. This has aroused policy debates concerning the reason why the immigrants are not well integrated into the labor market and how to solve the problem. While there is a broad consensus on micro reform policy alternatives, there are significant opinion gaps concerning major issues such as labor market flexibilization and immigration restrictions. It would seems that the poor results of immigrants' labor market integration may increase the pressure for labor market flexibilization and also bring about significant changes to the Swedish welfare state model designed on the premise of full employment.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1284-1287
• /
• 1996

전기도금공장 ANODE 투입 및 추출 자동화 사업은 ANODE 자동투입 Robot이 개발되어 적용되기전까지는 국내에서 적용된 사례가 전혀 없었고 선진제철소에서 일부 적용된 사례가 있는 것으로만 알고 추진되었던 사업이다. 이번에 개발하여 현장에 적용한 ANODE 자동투입 robot은 가반중량이 300kg이나 되는 이동형 특수 robot으로 국산화개발품이지만 성능의 신뢰성이 입증되지 않는 상태에서 추진되었기 때문에 위험 부담성이 컸으며 완전자동화가 되기까지 많은 시행착오를 겪었다. 시행착오의 주요원인으로는 현장여건 즉 설비의 간섭, FUME에 의한 robot의 고장 또한 robot 자체의 설계 miss등 무수히 많았다. 이번 ANODE 자동투입 robot 개발 및 현장 적용으로 향후 확대 적용시 시행착오에 의한 문제점을 최소화 할수 있는 대책을 수립할수 있는 좋은 기회가 주여져 96.12.E 준공을 목표로 2차분 ANODE투입 자동화 사업이 진행중에 있으며 1차분과 시스템을 통합하여 보다 완벽한 자동화시스템을 구축할 예정이며 97년도에는 포항제철소로 확대 적용할 예정이다.

• Journal of the Korea Society for Simulation
• /
• v.28 no.1
• /
• pp.41-47
• /
• 2019

Defense simulation is actively used to test various weapon systems and evaluate their effectiveness. The AddSIM environment is a simulation framework designed to support the weapon systems dealt with in defense simulation from an integrated point of view and is designed for reuse and scalability. Models used in AddSIM require base model structure fidelity and verification of user code area. Therefore, this paper describes the dynamic verification method used for completeness of models used in AddSIM. For the dynamic verification of user code, the specification method and the verification algorithm are described. Also, we introduce the prototype of the dynamic verifier implemented based on verification specification method and algorithm. The case study analyzes the verification results based on the simulation example implemented in AddSIM environment.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.2
• /
• pp.563-572
• /
• 1997

E-mail has been eidely used for unformation delivery as an Inernet serive. As multimedia etchnologies are developed rapidly, most of the recent Unternet infornation servies support multimedia data. E-mail system also needs to suport multimedia nesage. But Internet mail servise using simple maiol transfer protocol(SMTP) speci-fied in RFC 821/822 handles only ASCII text messages repressented with 7-bit code. Each line the message has the length limitation as well. Those are why it cannot satisfy the diverse user'w demands. Multipuepose Unternet mail extensions(MIMZE), which is a modification and supplement of RFC 822,was proposed for supporting transportation of multimedia data.It can solve the limitations of sizes and types in contents of a message. In this study the E-mail system has been designed and implemented according to the MIME standard in order to solve the limitations of transpotation of messages regardless of the message content type. Hypertext markup language(HTML)syntax is applied to the mail system, and so it is possible to display a message consisting of differnt media as an intergrated from for the purpose of better understanding a message. No application program is needed for displaying a message including image data,and convenience for user is considered in the system. The futuer work is to improve the E-mail system so that it may support motion pictures and sound information,Thereby tge perfor multimeda E-mail system providing inergrated user's wiew will be developed.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.9
• /
• pp.1177-1184
• /
• 1999

본 논문에서는 스캔플립프롭 선택 시간이 짧고 높은 고장 검출률(fault coverage)을 얻을 수 있는 새로운 부분스캔 설계 기술을 제안한다. 순차회로에서 테스트패턴 생성을 용이하게 하기 위하여 완전스캔 및 부분스캔 설계 기술이 널리 이용되고 있다. 스캔 설계로 인한 추가영역을 최소화 하고 최대의 고장 검출률을 목표로 하는 부분스캔 기술은 크게 구조분석과 테스트 가능도(testability)에 의한 설계 기술로 나누어 볼 수 있다. 구조분석에 의한 부분스캔은 짧은 시간에 스캔플립프롭을 선택할 수 있지만 고장 검출률은 낮다. 반면 테스트 가능도에 의한 부분스캔은 구조분석에 의한 부분스캔보다 스캔플립프롭의 선택 시간이 많이 걸리는 단점이 있지만 높은 고장 검출률을 나타낸다. 본 논문에서는 구조분석에 의한 부분스캔과 테스트 가능도에 의한 부분스캔 설계 기술의 장단점을 비교.분석하여 통합함으로써 스캔플립프롭 선택 시간을 단축하고 고장 검출률을 높일 수 있는 새로운 부분스캔 설계 기술을 제안한다. 실험결과 대부분의 ISCAS89 벤치마크 회로에서 스캔플립프롭 선택 시간은 현격히 감소하였고 비교적 높은 고장 검출률을 나타내었다.Abstract This paper provides a new partial scan design technique which not only reduces the time for selecting scan flip-flops but also improves fault coverage. To simplify the problem of the test pattern generation in the sequential circuits, full scan and partial scan design techniques have been widely adopted. The partial scan techniques which aim at minimizing the area overhead while maximizing the fault coverage, can be classified into the techniques based on structural analysis and testabilities. In case of the partial scan by structural analysis, it does not take much time to select scan flip-flops, but fault coverage is low. On the other hand, although the partial scan by testabilities generally results in high fault coverage, it requires more time to select scan flip-flops than the former method. In this paper, we analyzed and unified the strengths of the techniques by structural analysis and by testabilities. The new partial scan design technique not only reduces the time for selecting scan flip-flops but also improves fault coverage. Test results demonstrate the remarkable reduction of the time to select the scan flip-flops and high fault coverage in most ISCAS89 benchmark circuits.

• Economic and Environmental Geology
• /
• v.44 no.6
• /
• pp.525-532
• /
• 2011

In this study, the usefulness of underground dam as a means for the sustainable development of groundwater, and its performance in the management of groundwater resources were analyzed. The fully integrated SWAT-MODFLOW was applied to the Ssangcheon watershed in Korea to evaluate the effectiveness of groundwater dam construction. After construction, the groundwater level raised in the upstream area of groundwater dam while lowered in the downstream area. Also, it is shown that the exchange rate of river-aquifer interactions increased in the upper area of the dam. Since the storage capacity of the aquifer largely increased in the upper area of the dam, the exploitable groundwater could be greatly increased as much. This study demonstrated that a groundwater dam was a very useful measure to increase the available storativity of groundwater aquifers. It also represented that the combined analysis using SWAT-MODFLOW was helpful for the design and opeation of groundwater dam in the Ssangcheon watershed.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.10
• /
• pp.171-178
• /
• 2023

In this paper, we propose a smart automated warehouse to maximize space utilization. Previous elevator-type automatic warehouses were designed with a maximum payload of 100kg on trays, which has the problem of extremely limiting the number of pallets that can be loaded within the space. In this paper, we design a smart warehouse that can maximize space utilization with a maximum vertical stiffness of 300kg. As a result of the performance evaluation of the implemented warehouse, the maximum payload was 500.6kg, which satisfied the original design and requirements, the lifting speed was 0.5m/s, the operating noise of the device was 67.1dB, the receiving and forwarding time of the pallet was 36.92sec, the deflection amount was 4mm, and excellent performance was confirmed in all evaluation items. In addition, the PLC control method, which designs the control UI and control panel separately, was integrated into the PC system to improve interoperability and maintainability with various process management systems. In the future, we plan to develop it into a fully automatic smart warehouse by linking IoT sensor-based logistics robots.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.8 no.5
• /
• pp.83-97
• /
• 1998

This paper developes an integrated environment CAD system that can design and implement an accurate and cost-effective FLC automatically. For doing this, an integrated development environment (IDE) (called FADIS; FLC Automatic Design and Implementation Station) is built by the seemless coupling of many existing. CAD tools in an attempt to the FADIS performs various functions such that (1) i~utomatically generate the VHDL components appropriate for the proposed FLC architecture from the various design parameters (2) simulate the generated VHDL code on the Synopsys's VHDL Simulator, (3) automatically compiler, (4) generate the optimized, placed, and routed rawbit files from the synthesized modules by Xilinx's XactStep 6.0, (5) translate the rawbit files into the downloadable ex- [:cution reconfigurable FPGA board (VCC's EVCI), and (7) continuously monitor the control status graphically by communicating the FLC with the controlled target via S-bus. The developed FADIS is tested for its validity by carrying out the overall procedures of designing and implementing the FLC required for the truck-backer upper control, the reduction of control execution time due to the controller's FPGA implementation is verified by comparing with other implementations.

• Journal of Korea Society of Industrial Information Systems
• /
• v.11 no.4
• /
• pp.72-81
• /
• 2006

In this paper, we first define a total of 64 instructions that are considered to be essential and frequently used, construct a datapath diagram, determine the control sequence using a finite state machine, and implement an 8-bit microcontroller using FPGA in VHDL. In the past, only functional simulation results of a rudimentary microcontroller were reported, the microcontroller lacked interrupt handling capability, or it was not implemented in hardware. We have designed a self-contained 8-bit microcontroller such that it can perform data transfer, addition, and logical operations, as well as stack and external interrupt operations. Following timing simulation of the designed microcontroller, we implemented it in an FPGA and verified its operation successfully. The design and implementation has been done under the Altera MAX+PLUS II integrated development environment using the EP1K50TC144-3 chip. The maximum operating frequency, the total number of logic elements used, and the logic utilization were found to be 9.39 MHz, 2813, and 97%, respectively. The result can be used as a microcontroller IP, and as needs arise, the VHDL code can be modified accordingly.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.4
• /
• pp.612-622
• /
• 2003

This paper studied and proposed a XML document storing-and-retrieval framework based on a variant k-ary complete tree and a RDF metadata, which is composed of an effective storing module to store xml documents, a retrieving module to retrieve xml documents, and a connecting module to make this system intemperate in the web environment. In this storing module, DTD independent DOM based decomposition model using a method of addressing unique ill using a variant k-ary complete tree is adopted and is implemented. Query Processing Module includes a XPath query process and a content based retrieval function using word index for content information. To retrieve more exactly data, a structural retrieval using RDF metadata is adopted and implemented. In order to implement effectively XML document storing and retrieval system in the web environment, API using XML-RPC, API using HTTP's GET, PUT, POST and API using SOAP have been adopted and implemented.