Proceedings of the Korean Vacuum Society Conference
/
2014.02a
/
pp.91-91
/
2014
2002년 21세기 프론티어 연구개발사업으로 착수한 양성자기반공학기술개발사업이 2012년말 완료되었다. 이 사업을 통하여 이온원, RFQ, DTL, 초전도 가속관, 빔라인, 고주파 시스템, 제어 시스템 등 양성자 및 이온 가속기의 핵심 요소기술을 개발하고 100 MeV 선형 양성자가속기 및 이온가속기를 제작하여 경주에건설한 양성자속기연구센터에 설치하고 사업을 마무리하였다. 2013년 상반기에 냉각시스템 등 부대시설의 시운전, 양성자가속기와 20 MeV 및 100 MeV 빔라인 각 1기를 포함한 모든 시설의 시운전을 마무리하고, 한국원자력안전기술원의 방사선안전시설검사를 거쳐 7월부터 운영을 착수하였다. 양성자가속기는 2013년말 까지 총 2,290 시간을 가동하여 937건의 이용자 빔 서비스를 제공하였다. 기체, 금속, 대전류 이온을 공급할 수 있는 이온가속기 3대는 기업체의 공정 및 제품개발을 위한 이용을 중심으로 622건의 이용자 빔 서비스를 제공하였다. 2014년도는 양성자가속기는 연간 2,500 시간 가동, 빔 서비스 1,100건을 목표로 하고 있으며, 현재 20 MeV 및 100 MeV 각 1기인 뿐인 빔라인 증설을 준비하고자 한다. 이온가속기는 상반기에만 이용자 빔 서비스를 제공하고 2014년 11월 완공될 빔이용연구동으로 이전 설치하여 보다 양질의 이온빔을 공급할 수 있도록 장치를 보완 할예정이다. 더불어 2015년에는 3 MeV 헬륨빔과 1 MeV 기체 이온빔을 제공할 수 있는 장치도 추가로 설치할 예정이다. 빔이용연구동 및 이온가속기 업그레드가 완료되면 보다 다양한 양질의 이온빔을공급하여, 특히 중소기업의 제품 개발에 도움을 줄 수 있도록노력할 예정이다. 양성자가속기연구센터는 장기 비전인 펄스형 중성자원의 구축을 실현하고자 노력을 지속할 것이다. 미국의 SNS 및 일본의 J-PARC 파쇄 중성자원은우수한 연구 성과를 생산하기 시작하였고 우리나라도 이에 대한 수요가 생겨나도 있다. 충분한 수요가 형성되면 이미 확보한 부지와 초전도 가속기 기술을 활용하여 단시간 내에 펄스형 중성자원 구축이 가능할 것이다. 펄스형 중성자원이 구축되면 양성자가속기연구센터는 당초 목표한 양성자, 중성자 및 다양한 종의 이온을 한 사이트에서 제공하여, 입자빔을 이용한 다양한 연구개발에서 상당한 시너지 효과를 낼 수 있을 것으로 기대한다.
In this paper, we consider a two-agent single-machine scheduling problem with exponential job-dependent position-based learning effects. The objective is to minimize the total weighted completion time of one agent with the restriction that the makespan of the other agent cannot exceed an upper bound. First, we propose a branch-and-bound algorithm by developing some dominance /feasibility properties and a lower bound to find an optimal solution. Second, we design an efficient simulated annealing (SA) algorithm to search a near optimal solution by considering six different SAs to generate initial solutions. We show the performance superiority of the suggested SA using a numerical experiment. Specifically, we verify that there is no significant difference in the performance of %errors between different considered SAs using the paired t-test. Furthermore, we testify that random generation method is better than the others for agent A, whereas the initial solution method for agent B did not affect the performance of %errors.
Journal of the Korea Institute of Information and Communication Engineering
/
v.12
no.1
/
pp.205-214
/
2008
To transfer large amount of packets fast in sensor network, it is necessary that the delay between successive packet transmissions should be minimized as possible. In Sensor network, since the Operating Systems are worked on the event driven, the Timer Event is used to transfer packets successively. However, since the transferring time of packet completely is varies very much, it is very hard to set appropriate interval. If interval is too long, delay also becomes too long but if interval is too short, the fail of transfer request would increase. In this paper, we propose ESTEO which reduces the delay between successive packet transmissions by using SendDone Event which informs that a packet transmission has been completed. In ESTEO, the delay between successive packet transmissions is shortened very much since the transmission of next Packet starts at the time when the transmission of previous packet has completed, irrespective of the transmission time. Therefore ESTEO could provide high packet transmission rate given large amount of packets.
4M D램 공동연구 개발사업(1986.10~89.03)은 당시 미 일의 강력한 기술보호주의를 극복하기 위한 자구책으로 시작되었다. 국내 반도체업계는 선진국의 높은 기술장벽 및 기술보호주의를 극복하고, 강력한 경쟁력확보 및 기술축적을 위해 정부에 건의하였다. 이에 정부는 적극적인 자금지원을 통해 4M D램 개발 및 주변기술 개발을 목표로 초고집적반도체기술공동개발사업을 수행하게 되었다. 본 공동R&D사업은 ETRI의 주관으로 당시 금성반도체, 삼성전자, 현대전자산업 등의 반도체 업체와 학계가 참여하였고, 1986년 10월부터 1989년 3월까지 3단계에 걸쳐 수행되었다. 공동연구의 목적은 설계, 공정, 조립, 검사 등 4M D램 제조와 관련되는 기본기술개발과 함께 $0.8{\mu}m$ 선폭의 4M D램을 개발하는 것이며, 이를 위해 단계별 목표를 설정하고 관민연의 혼연일치로 추진되었다. 1차년에는 중요 핵심기술개발, 2차년에는 $0.8{\mu}m$ 4M D램 Working-die개발, 3차년에는 수율 20%의 $0.8{\mu}m$ 4M D램 양산시 제품을 목표대로 완료하였다. 각 연구단계별로 주요 핵심기술에 대한 연구평가가 실시되었으며, 관련기술에 대한 중복투자 방지를 위해 2차년도부터 분담연구가 수행되었고, 상호 기술공유를 위한 기술교류회가 활발히 이루어졌다. 또한 R&D수행을 통해 4M D램 Working-die를 2차년도 중반에 개발완료하였으며, 3차년도에는 4M D램의 20% 수율확보와 공정기술의 최적화 및 DB 구축을 수행했다. 공동R&D 방식에서도 기업간 경쟁체제 도입에 입각하여 동기유발 형태로 진행되었다. 정부는 자금적 지원으로 기업간의 경쟁 심리를 자극하는 전략을 추진했다. 선두기업인 삼성에게는 선행적 개발 지위에 비례하여 더 많은 지원을 부여하는 대신에, 삼성의 기술성과를 다른 기업에게로 확산시킴으로써 반도체 3사 전체의 기술능력을 향상시키는 전략을 추진했다. 본 사업이 성공적으로 수행되어 반도체 제품의 세계시장 점유율제고, 국제수지 개선, 반도체 핵심기술 조기확보뿐만 아니라 16M D램급 이상 차세대 반도체기술 개발의 교도보가 되었다.
Digital content is difficult to distinguish between the original and the replica due to its nature. For this reason, NFT technology using blockchain technology is attracting attention because it can guarantee the proof and scarcity of the original digital content. However, the NFT buyer does not own the copyright to the digital content, but the ownership. In particular, since the minting process of issuing NFTs is possible for anyone, there is a copyright threat to the copyright holder. In this study, we propose a verification protocol based on DID for the process of issuing and transacting NFTs for copyright protection of copyright holders' digital contents. As a research method, the problems of research cases related to digital contents were analyzed and the safety was comparatively analyzed. NFT issuance can only be issued by copyright holders whose identity has been verified through DID, and only users who have completed authentication can participate in the transaction to prevent indiscriminate theft and use of digital content and form a safe and transparent transaction market.
The residual heat and high CaO content present in the slag remaining in the ladle after the completion of continuous casting in the electric arc furnace (EAF) steelmaking process have been utilized to reduce power consumption and lime usage in the ladle furnace (LF) process. However, if the timing of such processes does not align with the LF and continuous casting operations, the recycling rate will decrease. To increase the slag recycling rate, the effect of ladle slag recycling methods, specifically pouring ladle slag into the slag pot in advance for subsequent recycling, on LF operations was analyzed. The slag liquefaction rate was calculated using the thermodynamic program Factsage 8.3 for ladle molten slag recycling methods. By applying each of the 10 heats operations for the ladle slag recycling methods, the desulfurization ability and LF operation performance were compared. It was found that when slag was immediately recycled into the ladle after continuous casting was completed, power consumption decreased by 0.3 MWh, LF operation time was shortened by 1.2 minutes, and the desulfurization rate increased by 5.8%.
현재 수 많은 공중파 채널을 비롯하여 각종 케이블 TV 와 위성 TV 등의 채널이 대량으로 디지털화 되어 가고 있지만 파국의 디지털 TV 의 규격은 MPEG2 라는 표준 규격으로 통일 되어 우리에게 전해지고 있다. 이런 수많은 동영상 정보들은 디지털이라는 특성상 기록과 보관이 용이하므로 사용자는 수 많은 정보를 저장, 관리 할 수 있게 되었다. 따라서 방대한 데이터의 바다 속에서 원하는 정보를 검색하는데 있어서 기존의 방식 즉 일정 속도를 가진 검색 엔진을 사용하는 것 보다는 MPEG2 규격의 표준들을 보다 효율적으로 이용하여 사용자들이 동영상 정보 중에 이동하기 원하는 부분으로 이동하기 위한 비선형 검색엔진을 소개한다. 이를 이용한 PVR(Penonal Video Recorder)은 현재 hardware 부분은 완료되었고 일부 software 엔진을 적용하여 개발 중이다.
1990년 7월 이후 #2 베어링에서 발생한 오일 휩 현상을 감지하고서도 그 주원인을 일반적으로 흔히 발생하는 사항에서만 해결방안을 찾으려 노력한 결과 3년 반의 시간이 경과되었고, 뜻하지 않게도 저널 직경의 불균일에 의한 오일 휩 현상임 을 뒤늦게 알게 되었다. 철저한 점검의 필요성을 강조하지 않을 수 없다. 증기터빈 의 Overhaul 작업완료 후 Oil Flusning 절차가 있는데 이 Oil Flusning 방법에 문제 가 있다. 보통은 작업완료후 로터를 정지한 상태에서 베어링 앞에 Oil Strainer(Fine Mesh)를 설치하고 오일 펌프를 기동하여 Flushing을 하는데 이때 Strainer를 통과한 작은 이물질이 베어링내에 축적되었다가 터빈 기동시 이 이물질과 로터가 접촉되어 저널이 손상되게 된다. 인천화력3호기 #2 베어링의 오일 휩을 일으키게 한 저널의 편마모 현상도 이와같은 경우임에 틀림없다. 왜냐하면 '90, O/H시 #2 베어링 저널의 직경은 원통형이었기 때문이다. 따라서 Oil Flusning은 터빈 구조상 불가능한 경우 도 있겠지만 베어링 by-pass Oil Flushing 시스템으로 개조 운영되어야 저널 및 베어링 마멸현상을 제거할 수 있고 이로인한 오일 휩 현상도 예방할 수 있을 것으로 판단된다.
Proceedings of the Korean Nuclear Society Conference
/
1995.10a
/
pp.286-292
/
1995
국내 최초의 한국표준원전 가압경수로인 울진 3,4 호기의 운전 특성을 정확하게 실시간으로 모사할 수 있는 한국표준원전 NPA가 개발되고 있다. 동 NPA는 발전소의 정상 및 비정상 운전 상태를 Desk-top 소령 컴퓨터에서 모사하여 그 결과를 그림화면(mimic)에 나타내고 운전원 조치 사항을 Interactive하게 수용할 수 있는 능력을 갖추고 있다. 한국표준원전 NPA의 개발을 위하여 울진 3,4 호기 한국표준원전의 설계 자료를 기준으로 그래픽사용자 인터레이스의 새로운 mimic 및 해석모델에서 사용하는 데이타베이스를 성공적으로 작성하였다. 향후 한국표준원전 NPA는 새로운 모형 개발을 완료한 후 발전소 운전자료와의 비교분석을 통해 성능 검증을 거치면 교육을 및 엔지니어링 작업에 유용하게 사용될 수 있을 것이다.
Proceedings of the Materials Research Society of Korea Conference
/
2003.11a
/
pp.126-126
/
2003
산화아연은 높은 열전도도와 열용량을 갖으며, 결정 부피의 44%만이 아연 및 산소 이온으로 채워져 있어 결함의 생성이 다양하여 여러 가지 전기적, 광전기적, 촉매 특성등을 부여할 수 있어 산업전반에 널리 이용되고 있다. 따라서, 본 연구에서는 초음파 분무 연소합성법을 이용하여 Zinc nitrate hexahydrate를 산화제로, Carbohydrazide를 환원제로 사용하여, 연소합성을 위한 에너지를 최대희 얻기 위해 산화수와 환원수의 비율이 1:1이 되게 조절하여 전구체의 산화ㆍ환원 반응을 이용하여 액적의 체류시간, 농도, 온도, filtering 효과등을 조절하면서 액적 단위로 연소반응을 유도함으로써 부가적인 하소과정이 필요없이 상전이가 완료된 구형의 나노크기 ZnO 분말을 in-situ로 제조하여 입자의 크기와 형 태, 결정상등을 분석하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.