• Applied Chemistry for Engineering
• /
• v.31 no.5
• /
• pp.532-538
• /
• 2020

In this study, emulsification process were conducted to manufacture the natural sunscreen from raw materials such as shea butter, olive emulsifier wax, and green tea extract. The emulsification was optimized by using the central composite design model-response surface methodology (CCD-RSM) where the response values were established as the mean droplet size (MDS) and emulsion stability index (ESI) after 7 days in addition to UV absorbance at 300nm. The amount of emulsifier and additives and emulsification time were established as operating variables and the optimal conditions of sunscreen emulsification were accepted as 3.70, 2.47 wt.%, and 15.42 min, respectively according to the result of CCD-RSM. On the other hand, the response values were estimated as 1173.80 nm and 99.56% for MDS and ESI, respectively, after 7 days, in addition to UV absorbance at 300 nm (2.47). The average error from actual experiments was a low level as about 3.0 ± 1.5%, which is mainly due to the fact that the optimization using CCD-RSM applied in this study was in the relatively high significant level.

• Solar Energy
• /
• v.18 no.3
• /
• pp.177-183
• /
• 1998

The thermal performance of a heating board with microencapsualted PCM was investigated and compared to conventional heating board. The employed PCM was the myristic acid $$ and was encapsulated by the multiple layers of PMMA and paraffin wax. The size of encapsulated PCM was $1{\sim}1.5mm$. Accoring to ANSI/ASHRAE test procedure, the close-loop test configuration was installed. Air was used as the heat transfer fluid and a calibrated orifice was employed for the measurement of air flow rates. The thermal performance test of two different heating boards(with 10 wt% PCM and without PCM) was conducted for different air flow rates and the heat transfer characteristics during cooling was compared. The test results showed that the surface temperature of heating board with 10 wt% PCM maintained higher during the cooling process than that of the heating board without PCM and experimentally determined heat transfer coefficient in heating board with PCM showed higher value compared to heating board without PCM.

• Clean Technology
• /
• v.18 no.2
• /
• pp.155-161
• /
• 2012

The purpose of this study is to remove paraffin wax binder effectively from powder injection molded part using supercritical fluids in powder injection molding process. For a thin powder injection molded part about 1-2 mm thickness, paraffin wax binder can be removed rapidly without any defect by traditional supercritical extraction process which has fixed high temperature and pressure condition. But, for a thick powder injection molded part, there are limitations in removing paraffin wax binder by the fixed high process condition because crack occurs at the beginning step. Therefore, here we studied variable condition debinding process that starts with mild process condition at the beginning step and then increase the process conditions simultaneously at each step. To find out the initial process condition that has the highest extraction yield without any defect for each sample thickness, we investigated various supercritical debinding conditions using 1-4 mm thickness ceramic injection molded sample. By using the variable condition debinding process that starts with the initial process condition at the first step and then increasing process conditions simultaneously at each step (temperature from 333.15 to 343.15 K, pressure from 12 to 27 MPa, and $CO_2$ flow rate from 1.5 to 10 L/min), over 95% of paraffin wax binder was removed from the 4 mm thick (10 mm diameter) ceramic injection molded disk samples within 5 hours.

• Korean Journal of Plant Taxonomy
• /
• v.38 no.4
• /
• pp.405-431
• /
• 2008

Cuticle micromorphology of 22 species of Quercus and outgroup were examined by the SEM. Twenty-two species selected each two or three species in all section of the genus Quercus. The genus Trigonobalanus and Alnus are selected as outgroups. Ten characters of the inner surface and eight characters of the outer surface of the cuticle have been described. Some characters, such as the present of papillae, arrangement of subsidiary cell, shape of anticlinal cell wall are considered important character for infrageneric classification. A parsimony analysis of 18 characters resulted in 72 most parsimonious trees with its lengths of 66 steps. The topology obtained from the analysis showed two major lineages. Subgenus Cyclobalanopsis formed one clade by 75% and subgenus Quercus formed another clade by 57% bootstrap value. Based on the cuticle morphology, the two subgenus delimitation of Camus was supported. However, sect. Erythrobalanus and sect. Cerris formed one group, and sect. Lepidobalanus formed polytomy.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.39 no.1
• /
• pp.65-73
• /
• 2013

Lip make-up products can be easily taken into body with food. For this reason, those products are requires to meet lots of qualifications compared with other cosmetic products. In addition, concerns about safety on synthesized tar pigments is constantly issued. Thus, demand of natural pigments is gradually increased and many kinds of natural pigments have been developed. However, there are some problems when natural pigments are applied to cometic products instead of synthetic ones. There is a reason that most of natural pigments consist of hydrophilic materials of sort of anthocyanin, but the existing lip make-up products is anhydrous oil dispersion type without water consisting oil and wax. Therefore, when watersoluble natural pigments are applied to anhydrous lip make-up products, color expression is lower and phase separation occurs due to the instability of the product. In addition, natural pigments have disadvantages that they can easily change by pH, heat and sunlight. There are troubles of stability because it is not easy to adjust for these factors in case of anhydrous forms. Aim of study is to develop lip make-up products which have not only safe to human but being high in expression of color by using natural pigments and securing stability of colorant as natural pigments are offered to polyol in oil emulsion. Then, lip make-up products which have heavy moisture while having not dryness that is created when the moisture evaporates are developed.

• Horticultural Science & Technology
• /
• v.31 no.5
• /
• pp.590-597
• /
• 2013

Principle component and emission localization of volatile compounds were investigated according to scent intensity of rose flower. Scent intensity in cultivars and bred-line of Rosa hybrida was divided into three levels; light ('Feel Lip', 'Venus Berry'), medium ('GR07-135'), strong ('Honey Blue'). The major volatile compounds were different depending on the cultivars and selected line; 3,5-dimethoxytoluene (DMT), benzene, 1,3,5-trimethoxy ('Feel Lip'), megastigma-4,6(Z),8(E)-triene ('Venus Berry'), DMT, benzene,1-ethenyl-4-methoxyand, phenylethylalcohol ('GR07-135') and germacrene-D, DMT ('Honey Blue'). The adaxial epidermal cells were conical papillate shape, whereas the abaxial epidermal cells were flat shape. The adaxial epidermal cells of 3 cultivars and 1 selected line were surrounded by thick cell wall and covered by waxy cuticle of 2 cultivars and 1 selected line (except 'Honey Blue'). The adaxial epidermal cells contained starches in 'Feel Lip', osmiophlic droplets in 'Venus Berry', starchs, plastids, vacuoles in 'GR07-135' and plastoglobules, plastids, vacuoles in 'Honey Blue'. Based on these results, it appears that plastids and vacuoles in adaxial epidermal cells with conical papillate shape are associated production and emission of volatile compounds in scent R. hybrida.

• Applied Chemistry for Engineering
• /
• v.30 no.5
• /
• pp.597-605
• /
• 2019

In order to improve the adhesion of water-based adhesive, gemini type nonionic reactive surfactants were synthesized and applied to water-based adhesives. The surfactants were synthesized by using maleic acid and polyoxyethylene cetyl ether having different length of ethylene oxide and confirmed by FT-IR and $^1H-NMR$. Their appearance was light yellow wax. The cloud point of the compound was more than $78^{\circ}C$. The measured critical micelle concentration (c.m.c) was $1.0{\times}10^{-4}{\sim}7.0{\times}10^{-4}mol/L$ and surface tension at c.m.c was 25.9~32.0 mN/m. As the number of ethylene oxide increased, the emulsifying power was improved. The foaming height of each compound by Ross-Miles method was 1.4~4.5 cm. The synthesized surfactants was then used as an emulsifier in emulsion polymerization of water-based adhesives and its physical properties were evaluated. The solid contents of prepared adhesives was 59%. The average particle size and initial tackiness of the prepared adhesives were 164~297 nm and ball no. of 20~32, respectively. The peel strength was $1.8{\sim}2.1kg_f/mm$. The retention rate of adhesives viscosity was evaluated to 99% during 30 days. Therefore, synthesized gemini type nonionic reactive surfactants are expected to be applied as an emulsifier for the high adhesive force.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.4
• /
• pp.456-466
• /
• 2019

As digital dentistry technology is being developed, it is being used in various ways. This case covers how digital dentistry technology is being applied on the treatment of patients with loss of vertical dimension due to worn dentition and multiple loss of teeth. The loss of vertical dimension was carefully assessed and recovered, and implants were placed with surgical guides, designed considering the final restoration. The movement of the mandibular was measured with the electronic instrument for recording mandibular movement. Wax-up process was done with Naturgemäße Aufwachs-Technik (N.A.T.) and Natural functional reconstruction (N.F.R.). It was scanned, and the provisional restoration was fabricated using Computer-Aided-Design/Computer-Aided-Manufacturing (CAD/CAM) technology, and the adjustment process was done at the clinic to meet with the satisfaction both functionally and esthetically, and then, using double scanning and CAD/CAM technology, it was carried out as a final restoration. As a result, the patient obtained satisfying results, utilizing the benefits of digital dentistry technology and traditional methods.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.04a
• /
• pp.109-109
• /
• 2019

2018년 5월 전라북도 남원군에서 재배하여 수확 후 $0^{\circ}C$ 저장고에서 예냉을 마친 산마늘을 사용하였으며 외 포장 상자는 골판지로 구성된 통기공이 없는 골판지상자 1kg용을 사용하였다. 골판지상자와 함께 내부 포장으로 사용하기 위한 내포장 필름은 $20{\mu}m$ 두께의 HDPE으로 된 필름 봉지, 흡습종이는 파라핀왁스 코팅 종이($32{\times}35cm$, 태영산업)를 이용하여 조합 처리하고 국내에서 개발한 기능성 필름2종으로 포장처리는 총 4가지로 (1) PE(관행) (2) PE+흡습지 (3) 기능성필름1($30{\times}58cm$, 기능성물질 1%+40,000OTR, 제조사: 신영산업사) (4) 기능성필름2($30{\times}58cm$, Key fresh, 제조사: 씨앤케이프로팩(주)) 각 처리당 1kg 씩의 산마늘 잎을 포장하였다. 실험은 포장 처리 후 상온상태로 전북 완주군 실험실까지 수송하였으며 실험실 도착 후 상온 실험실에 두고 2일과 6일 후 중량감소율, 색도, 엽록소, 손실률 및 종합선도 등 품질특성 변화를 조사하였고 각 포장방법별 온도와 상대습도 변화를 보기 위하여 산마늘 잎이 포장된 상자 내부 중앙 부분에 디지털온습도기록계(SP-2000-20R)를 고정한 후 측정하였다. 대조구로 사용한 PE필름 단용으로 포장한 산마늘 잎은 상온저장 6일 경과 후 중량 소율이 1.7%, PE필름+신선지 처리는 1.0%, 기능성필름1과 기능성필름2는 거의 중량감소가 없어 1% 미만의 변화를 보였다. 산마늘 잎의 SPAD 값에 의한 엽록소 수치와 색도를 측정한 명도($L^*$)와 Hue angle 값의 변화는 기능성필름1과 기능성필름2가 유사하게 높게 유지되었고 반면에 PE필름은 저장 2일 후 부터 값이 감소하기 시작하여 6일 후 크게 감소하였다. 저장 6일 후 기능성필름1과 기능성필름2가 외관품위에서 높은 평가를 받아 상품성을 유지하고 있었으나 PE필름 처리와 PE필름+흡습지 처리는 상품성을 상실한 상태였다. 이러한 경향은 건전율에 있어서도 유사하였으며 기능성필름1(다공성 나노 물질이 혼입되어 있으며 산소투과율을 $40,000cc/m2{\cdot}day{\cdot}atm$으로 조성한 필름)이 상온저장 6일 후 상품성을 유지하는 건전율이 83%로 가장 높았다.

• Ocean and Polar Research
• /
• v.41 no.2
• /
• pp.89-97
• /
• 2019

Long chain plant waxes (n-alkanes, n-alkanoic acids, and n-alcohols) and their carbon isotopic compositions (${\delta}^{13}C$) in geologic archives are valuable tools for paleovegetation reconstruction. However, the sensitivity of different plant wax constituents to vegetation shift is not well understood. This study explores controls on the variation in ${\delta}^{13}C$ values of long-chain n-alkanes ($C_{27}$ to $C_{33}$) and n-alkanoic acids ($C_{26}-C_{30}$) in the Gulf of Mexico core sediments (ODP 625B) near the Mississippi River delta. n-Alkanoic acids' ${\delta}^{13}C$ values were higher than those of n-alkanes by 1-2‰ on average and such a pattern is the opposite from their isotope fractionation observed in living plants: 1-2‰ smaller in n-alkanes than n-alkanoic acids. We attribute this offset to contributions from aquatic plants or microbes that produce high concentrations of $^{13}C-enriched$ long-chain n-alkanoic acids. The sensitivity of n-alkanes and n-alkanoic acids to vegetation and climate varied among chain lengths. The $n-C_{33}$ alkanes were most sensitive to $C_4$ grassland expansion among n-alkane homologues, while no specific trend was observed in n-alkanoic acids. This is due to the similarity in n-alkanoic acid concentrations between $C_3$ and $C_4$ plants by homologues and low terrestrial plant-derived n-alkanoic acid contributions to the sediments. The results of this study suggest that long chain n-alkanoic acids' ${\delta}^{13}C$ values in sediments may be influenced by contributions from different sources such as aquatic plants or microbial inputs and therefore interpretations regarding this matter should be cautiously formulated. We suggest that there is a need for further studies on characterizing long-chain n-alkanoic acids ($C_{26}-C_{34}$) in aquatic plants and microbes from various climates and environments in order to investigate their production and integration into sedimentary archives.