• Journal of the Korean Society for Marine Environment & Energy
• /
• v.2 no.2
• /
• pp.70-77
• /
• 1999

The disturbance of oil-water interface confined between tandem fences caused by a sequence of traveling vortices below the interface is investigated. The traveling vortices are assumed to be those detached from the tip of the fore fence. The potential flow is assumed and the density interface is replaced as a sheet of vortex. The shape of the interface is predicted by tracing a finite number of marker particles placed at the interface. The velocity of the marker particles is determined by the Biot-Savart integral along the vortex sheet plus the contribution from the traveling point vortices. The rate of change of vortex-sheet strength is predicted by using an evolution equation for vorticity. The calculated results obtained for various conditions demonstrate that the large amplitude of interfacial wave following the moving vortek can be generated by the vortices.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.2
• /
• pp.179-184
• /
• 2010

This experimental study investigated the effect of tip clearance and bypass flow on the cooling performance of a straight fin heat sink. Both the horizontal and vertical directions of the bypass flow were studied by using a mass flow controller and test sections. The thermal resistance of a heat sink was obtained to elucidate the response of the cooling performance to tip clearance and bypass flow. The thermal resistance of a straight fin heat sink gradually increases with increasing tip clearance. A flow guide unit was employed to reduce the bypass flow. An optimal distance from the leading edge of the heat sink to the flow guide unit was found for the fixed volume flow rate. The contribution of the flow guide unit to the thermal performance of a heat sink increases with increasing volume flow rate.

• Nuclear Engineering and Technology
• /
• v.26 no.3
• /
• pp.345-354
• /
• 1994

Numerical Predictions including secondary flows have been Performed for fully developed turbulent single-phase rod bundle flows. The k-$\varepsilon$ turbulence model(two equation model) for the isotropic eddy viscosity, together with an algebraic stress model for generating secondary velocities, enabled the prediction of mean axial velocities, secondary velocities, and turbulent kinetic energy and turbulent stresses. Comparisons with experiment hate shown that the influence of secondary motion on mean flow and turbulence is dearly evident. The convective transport effects of secondary flow on the velocity field have been identified.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.49.2-49.2
• /
• 2005

• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.1
• /
• pp.42-49
• /
• 2015

The pressure oscillation induced by inhibitor in a solid rocket motor has been investigated by 3D large eddy simulation(LES) and proper orthogonal decomposition(POD). The vortex generation and breakdown at inhibitor are periodically observed between the inhibitor and the nozzle by flow-acoustic coupling mechanism. The excitation of pressure oscillation occurs as the flow impinges on the submerged nozzle head which recirculate in the cavity in rear dome of the motor chamber. The vortex generation frequency is closely related with the shedding frequencies of the detached vorticities at the inhibiter, which fairly compared with the experimental data.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.571-575
• /
• 2016

두꺼운 에어포일은 받음각이 클 때 역압력 구배가 일어날 수 있기 때문에 날개의 중앙부 후방에서 유동박리(Flow separation)와 와류 진동(Vortex shedding)이 쉽게 발생할 수 있다고 알려져 있다. 항공기가 이 착륙할 때 받음각이 커짐에 따라 유동박리에 의한 실속이 발생할 수 있는데 이를 지연 시켜 실속각을 크게 하면 안전성이나 효율 면에서 유리하다. 이를 위해 날개에 Hole을 만들어 와류를 잡아 유동의 박리를 지연시키고자 하였다. 본 연구에서는 EDISON_CFD 시스템의 2D_Incomp_P 솔버를 사용하여 NACA0018 에어포일의 윗면에 다른 위치의 Hole이 있을 때와 크기가 다른 Hole이 있을 때의 실속각이 가장 커지는 경우를 찾아보았다. Hole의 위치와 반지름 크기를 변화시켰을 때 각각의 최대 양력 계수를 비교하여 실속각의 증가와 Streamline을 그려 유동박리가 지연됨을 확인하였다.

• Annual Conference on Human and Language Technology
• /
• 1989.10a
• /
• pp.85-90
• /
• 1989

본고는 한국어의 양화사 유동 현상을 일반범주문법의 관점에서 통사론적, 의미론적으로 분석한다. '학생들이 넷이 술을 마셨다' 와 같은 문장에서 나타나는 유동 양화사는 통사론적으로 동사구수식어 (VP/VP)로 파악하고, 의미론적으로는 명사화된 속성이 관여하는 것으로 분석한다. 이 밖에도, 관련된 형태인 '넷' (NP/NP), '넷을' (TV/TV)등도 엄밀한 통사론적, 의미론적 분석을 시도한다. 성공적인 분석의 결과는 한국어 처리에 인접성 조건을 준수하는 범주문법의 사용가능성을 시사해 준다.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2000.11a
• /
• pp.101-104
• /
• 2000

1980년대 중반이후 화력발전소용으로 순환유동층 연소로(Circulating fluidized bed combustor : CFBC)가 많이 건설되고 있다. 이는 기존의 고정층 연소로보다 효율면에서 좋고, 차지하는 부피는 훨씬 적기 때문이다. 순환유동층의 층물질로 사용되는 모래, 석탄회, 석회석 등은 순환하는 입도, 비산유출되는 회재(fly ash)와 하부로 배출되는 회재(bottom ash)로 나누어진다. 주입되는 석탄 및 석회석의 입도는 입자-입자, 입자-연소로의 마모(attrition), 입자의 깨짐(fragmentation), 입자의 축소(shrinking) 등에 의해서 변화하게 된다.(중략)

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.04a
• /
• pp.185-190
• /
• 1994

본 연구에서는 와선 지배방정식의 계산을 위해 쌍곡선 blending 함수를 이용하여 와선운동의 정확한 계산을 할 수 있었고 이 방법을 통하여 임의로 거동하는 와선이 강체구와 간섭하는 경우의 3차원 유동장에 대한 해석과 이에 의한 쌍극 음향장 해석을 수행하였다. 경계치 적분방법을 통해 강체구에 작용하는 힘을 계산할 수 있었고 이 방법은 물체의 형태에 구애 받지 않으므로 임의 형상에 대해서도 유동장과 음향장 계산이 가능하다고 본다.

• Korean Journal of Agricultural Science
• /
• v.7 no.2
• /
• pp.109-118
• /
• 1980

This test was carried out to present criterion to measure the liquid limit of weathered granite soil by using the flow-table method whose operation is easier and more convenient than slump test. The results are as follows. 1. Since liquid limit of weathered granite soil depends upon the particle size distribution, weatheredness and content of colored minerals, maximum particle size should be prescribed when the testing rule of liquid limit by flow-table method is enacted. 2. If take the averaged water content as liquid limit where the height and width of flow are 1 cm respectively by 10 times dropping, this liquid limit is slightly less than the one by slump test. The differance of liquid limit between flow table method and slump test is about 10%. 3. Correlation curves of flow width-water content and flow hight-water content show similar shapes. Those are straight lines in semi-logarithm paper just as liquid limit test. 4. This flow-table method is more convenient and has less personal error of measurement than slump test does. So flow-table method would be favourably utilized for judging the engineering properties of soil.