• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.524-528
• /
• 2008

도류제 완성 후에 대한 100년 빈도 홍수시의 흐름(유향과 유속)을 기초로 하여 수치모형실험 결과의 일례를 그림에 나타내었다. 초록에는 오염물질 확산 수치모형실험결과를 시간별로 나타내지안했지만, 오염물질 확산에 대한 수치모형실험의 일반적인 결과를 평가하면 아래와 같다. 우선 흐름은 임랑해수욕장 방향으로 형성되고 청정지역인 방향에서는 남측도류제 설치전보다 복잡한 와류가 형성되어 청정지역 방향으로의 흐름은 미약하다. 모델하천의 빈도별 유출량이 증가함에 따라 큰 변화는 없고, 흐름은 모델하천 하구부 전면해역의 외해 방향으로 형성되며 빈도에 따른 흐름방향의 변화는 거의 없다. 보존성 오염물물 확산 계산 결과를 보면 평수시의 오염물질 영향범위는 양안에 도류제가 완성됨으로 인해 확산이 차단되어 도류제 내부의 오염물의 농도가 가중되고 도류제 전면해역으로의 오염물질의 확산범위가 확대됨을 알 수 있다. 모델하천의 빈도별 유출량이 증가함에 따라 오염물질의 농도가 일정하게 유지될 때 초기유출(3시간)에는 도류제 전면해역의 외해 방향으로의 오염물질 확산이 가속화 되며, 확산범위도 점차 확대된다. 오염물질의 농도가 감소하여 모델하천으로 부터의 오염물질 배출이 감소할 경우(15-24시간)는 오염물질 농도가 점차적으로 저감되며 청정지역으로 확산이 지연됨을 알 수 있다.

• Journal of Korea Water Resources Association
• /
• v.36 no.5
• /
• pp.761-776
• /
• 2003

Numerical models were employed to investigate the hydrodynamics of water flow in the lake behind a dam and the spillway where supercritical flows and negative pressures are likely to occur. In this study, 2-D model, RMA2 was employed to examine the upstream flow pattern and 3-D CFD model, FLUENT was used to evaluate the three-dimensional flow in the approaching region and flow distributions in the spillways and discharge culverts. The bathymetry and the details of structures were carefully taken into consideration in building the models. The results from applying the 2-D model for the planned Hantan River Dam show that large eddies, the velocity of which reaches up to 1 m/s are occurring in several places upstream of the dam. That means that the 2-D numerical model could be utilized to investigate the two-dimensional flow patterns after the construction of a dam. Three-dimensional numerical results show that the approach flow varies depending on stages and discharge conditions, and velocities at spillways, discharge culverts, and sediment flushing tunnels are differently distributed. The velocity distributions obtained from the numerical model and a hydraulic model at the centerline of spillways 100 m upstream of the dam show reasonably similar results. It is expected that 2-D and 3-D numerical models ate useful tools to help optimize the dam design through investigating the flow patterns in the spillway and at the upstream of the dam, which is not always feasible in hydraulic modeling.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.1
• /
• pp.52-57
• /
• 2018

This paper presents the design and cold flow test results of oxidizer-rich preburner injectors for a 9 tonf-class staged combustion engine cycle. Three types of coaxial swirl injectors were designed, and 12 injectors were designed for each type. The diameters of the fuel tangential holes are identical. The diameters of the oxidizer tangential holes were varied to investigate the influence of combustion in the oxidizer-rich preburner according to the momentum ratio of the gas oxidizer generated from combustion in the injector chamber and liquid oxidizer through the cooling channel. It will be verified through a powerpack and combustion test using an oxidizer-rich preburner. In the cold flow test, the fuel flow rate and oxidizer tangential hole flow rate reached the target value based on the designed differential pressure.

• Korean Journal of Environmental Agriculture
• /
• v.37 no.1
• /
• pp.49-56
• /
• 2018

BACKGROUND: The mobile vortex wet scrubber was developed to remove the harmful chemicals from accidental releases. However, there was a disadvantage that it was limitedly used for volatile organic compounds (VOCs) such as toluene according to the physicochemical properties. This study compared the removal efficiencies of an improved mobile scrubber on toluene and ammonia by applying diverse adsorption and absorption methods. METHODS AND RESULTS: The removal efficiencies on harmful chemicals were examined using various adsorption and absorption methods of water vortex process (C), phosphoric acid-impregnated activated carbon adsorption (PCA), pH-controlled water (pH 2.5) vortex process absorption with sulfuric acid (SWA) after ammonia exposure, granular activated carbon adsorption (GCA), and activated carbon mat adsorption (CMA) after toluene exposure. As a result, the best removal efficiency was shown in the SWA for ammonia and GCA for toluene. Also, the SWA and GCA methods were compared with different concentration levels. In the case of ammonia exposure (5, 10 and 25%), there was no difference by concentration levels, and the concentration in the outlet gradually increased, with pH change from acid to base. In the case of toluene exposure (50, 75 and 100%), the outlet concentration was higher relative to the exposure concentration in the initial 10 min, but the outlet concentration was remained steady after 10 min. CONCLUSION: The newly improved mobile scrubber was also effective in removing VOCs through adsorption techniques (activated carbon, activated carbon fiber, carbon mat filter etc.), as well as removing acid-base harmful chemicals by neutralization reaction.

• Korean Journal of Agricultural Science
• /
• v.37 no.3
• /
• pp.501-508
• /
• 2010

A swirl chamber type diesel engine attachable to 18 kW agricultural tractors was improved to reduce exhaust emissions. Compression ratio and throat area ratio of the combustion chamber were varied to determine optimum combustion conditions. Tests were composed of full load and 8-mode emission tests. Compression ratio was fixed as 21, but the swirl chamber volume was increased by 3.8%. Output power, torque, specific fuel consumption, exhaust gas temperature, and smoke level were not considerably different for compression ratios of 21.5 (reference condition) and 21 (test condition), while NOx, HC, CO and PM levels for the compression ratio of 21 were decreased by 11%, 46%, 28%, 11%, respectively, from those for the compression ratio of 21.5. The tests were also conducted with a compression ratio of 22 and 4.3% increased chamber volume. Output power, torque, exhaust gas temperature and smoke level were greater, while specific fuel consumption was less for the compression ratio of 22 than those for the compression ratio of 21.5. Increase of compression ratio decreased HC and CO levels by 24%, 39%, but increased NOx and PM levels by 24%, 39%. Based on these results, a compression ratio of 21 was selected as an optimum value. Then, full load tests with the selected compression ratio of 21 were carried out for different throat ratios of 1.0%, 1.1%, 1.2%. Output power and torque were greatest and smoke was lowest when throat area ratio was 1.1%, which satisfied the target values of specific fuel consumption (less than 272 g/$kW{\cdot}h$) and exhaust gas temperature (less than $550^{\circ}C$). Therefore, a throat area ratio of 1.1% was selected as an optimum value.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.1
• /
• pp.153-160
• /
• 2021

Nitrous oxide is a global warming substance and is known as the main cause of the destruction of the ozone layer because its global warming effect is 310 times stronger than carbon dioxide, and it takes 120 years to decompose. Therefore, in this study, we investigated the characteristics of NOx emission from N2O reduction by thermal decomposition of N2O. Bunsen premixed flames were adopted as a heat source to form a high-temperature flow field, and the experimental variables were nozzle exit velocity, co-axial velocity, and N2O dilution rate. NO production rates increased with increasing N2O dilution rates, regardless of nozzle exit velocities and co-axial flow rates. For N2O, large quantities were emitted from a stable premixed flame with suppressed combustion instability (Kelvin Helmholtz instability) because the thermal decomposition time is not sufficient with the relatively short residence time of N2O near the flame surface. Thus, to improve the reduction efficiency of N2O, it is considered effective to increase the residence time of N2O by selecting the nozzle exit velocities, where K-H instability is generated and formed a flow structure of toroidal vortex near the flame surface.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.58-58
• /
• 2017

점적 호스의 원통형 미로 구조물내의 유동특성을 분석하기 위해 금속판에 동일한 구조의 미로가 가공된 시험부를 활용하여 압력과 유량의 변화에 대한 실험을 CFD 해석하였다. 해석은 미로의 길이에 따른 유량 특성을 정밀하게 분석하기 위해 전체 미로에 구간별 총 8개의 배출구를 배치하고 밸브 조절을 통해 구간별 압력에 따른 유량을 측정함으로서 실험에 의한 압력과 유량의 관계를 검증하고 새로운 경질 미로를 설계하는데 응용하고자 한다. 경질 미로의 이론적인 해석에서 정밀도가 실험을 대신할 가능성이 있는지에 관심을 두었다. 점적관수의 경질 미로는 디자인을 달리함으로써 성능이 높고 미세한 스케일이 침착되지 않는 고성능의 점적관수 장치의 개발이 가능할 것으로 판단하였다. 미로 입구의 공급 유체 압력(Gauge pressure)을 0.5, 1.5, 2.5, 3.0 bar로 나누어 공급하였으며, 8개의 구간별 유출되는 유량은 전자저울에서 측정하였다. 향후 최적 미로의 새로운 설계를 위해 미로구조 전체를 CFD 해석하였고 그 결과를 실험치와 비교 분석하였다. 또한 경질 미로내 각 구간별 세부적인 유동구조를 분석하였고 해석결과와 실험결과를 통해 향후 새로운 경질 구조의 개발이 가능 할 것으로 판단되었다. 경질 미로의 입구압력에 따른 미로의 길이 #1과 #2에 대한 CFD 분석에서는 전체적으로 경질 미로에 압력이 증가할수록 미로의 유체 속도가 증가됨을 알 수 있었으며 이것은 #2에서도 거의 같은 양상을 나타내었다. 미로 통로에서는 와류로 인한 이물질의 멈춤 현상이 발생하지 않을 만큼 흐름이 원활함을 알 수 있었다. 미로의 길이 #3과 #4에 대한 CFD 분석과 미로의 길이 #5와 #6에 대한 CFD 분석에서는 압력이 증가하고 미로의 길이가 길어질수록 속도에도 영향을 미치고 있는 것으로 나타났으며 미로와 미로 사이의 넒은 통로에서는 유속이 크게 떨어지고 있음을 알 수 있었다. 따라서 이 부분에는 유체속의 이물질이 침착할 수 있는 가능성이 있으며 통로가 좁은 곳에서는 유속이 증가되는 것으로 나타났다. #7과 #8은 미로의 상하단으로 유출되는 부분의 차이이므로 실질적으로 해석의 결과는 차이가 없었다. 경질 미로에 대한 압력에 따른 미로의 길이별 유출량은 지수적인 반비례 현상을 나타내어 앞서 실험한 연구의 결과와 1~2% 오차 범위에서 잘 일치하였다. 따라서 점적 호스의 경질 미로에 대한 설계는 이론적인 해석을 통하여 새로운 디자인이 가능할 것으로 판단되었다. 경질 미로의 미로의 길이에 따른 CFD 분석의 결과는 실험적인 유출량의 값과 거의 일치하였다. 미로와 미로 사이의 넒은 통로에서는 유속이 크게 떨어져 이물질들이 침착될 가능성이 있었으며 실질적으로 넓게 설계하는 것이 유리하지 않을 것으로 판단되었다. 경질 미로에 대한 압력에 따른 미로의 길이별 유출량은 지수적으로 반비례 하였으며 점적 호스의 경질 미로에 대한 새로운 설계는 이론적인 해석을 통하여 가능할 것으로 판단되었다.

• Economic and Environmental Geology
• /
• v.38 no.6 s.175
• /
• pp.633-642
• /
• 2005

We present the sedimentary sequence and distribution pattern of the late Holocene muddy deposits in the northern East China Sea shelf using the high-resolution 'Chirp' profiles. The seismic sedimentary sequence overlying acoustic basement (basal reflector-B) can be divided into two depositional units (Unit 1 and 2) bounded by erosional bounding surface (mid reflector-M). The lower Unit 1 above basal reflector-H is characterized by the acoustically parallel to subparallel reflections and channel-fill facies. The upper Unit 2, up to 7 m in thickness, shows seismically semi-transparent seismic facies and lenticular body form. On the base of sequence stratigraphic concept, these two sediment units have developed during transgression and highstand period, respectively, since the last sea-level lowstand. The transgressive systems tract (Unit 1) lie directly on the sequence boundary (reflector B) that have farmed during the last glacial maximum. The transgressive systems tract in this study consists mostly of complex of delta, fluvial, and tidal deposits within the incised valley estuary system. The maximum flooding surface (reflector M) corresponding to the top surface of transgressive systems tract is obviously characterized by erosional depression. The highstand systems tract (Unit 2) above maximum flooding surface is made up of the mud patch filled with the erosional depression. The high-stand mud deposits showing a circle shape just like a typhoon symbol locates about 140 km off the south of Cheju Island with water depth of $60\~90m$. Coverage area and total sediment volume of the mud deposits are about $3,200km^2$ and $10.7\times10^9\;m^3$, respectively. The origin of the mud patch is interpreted as a result of accumulating suspended sediments derived from the paleo-Yellow and/or Yangtze Rivers. The circular distribution pattern of the mud patch appears to be largely controlled by the presence of cyclonic eddy in the northern East China Sea.

• The Transactions of the Korea Information Processing Society
• /
• v.1 no.3
• /
• pp.367-379
• /
• 1994

This paper describes scheduling algorithms of the UNIX operating system and shows an analytical approach to approximate the average conditional response time for a process in the UNIX operating system. The average conditional response time is the average time between the submittal of a process requiring a certain amount of the CPU time and the completion of the process. The process scheduling algorithms in thr UNIX system are based on the priority service disciplines. That is, the behavior of a process is governed by the UNIX process schuduling algorithms that (ⅰ) the time-shared computer usage is obtained by allotting each request a quantum until it completes its required CPU time, (ⅱ) the nonpreemptive switching in system mode and the preemptive switching in user mode are applied to determine the quantum, (ⅲ) the first-come-first-serve discipline is applied within the same priority level, and (ⅳ) after completing an allotted quantum the process is placed at the end of either the runnable queue corresponding to its priority or the disk queue where it sleeps. These process scheduling algorithms create the round-robin effect in user mode. Using the round-robin effect and the preemptive switching, we approximate a process delay in user mode. Using the nonpreemptive switching, we approximate a process delay in system mode. We also consider a process delay due to the disk input and output operations. The average conditional response time is then obtained by approximating the total process delay. The results show an excellent response time for the processes requiring system time at the expense of the processes requiring user time.