• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.256-256
• /
• 2022

레이놀즈 분해법은 유속을 비롯한 변수를 평균 성분과 변동 성분으로 분해하는 분석 방법으로, 난류 분석의 기본이 되는 방법이다. 그러나 유체 내에 장애물이 존재할 경우, 흐름에 큰 와류가 존재하여 난류 변동 성분과 구분되는 고유 구조가 형성되는데, 이러한 경우에 레이놀즈 분해법을 적용하면 고유 구조의 변동 성분이 난류로 처리되어 난류 강도가 과다하게 책정될 수 있다는 한계점이 있다. 이에 대한 대안으로 제안된 것이, 변수를 평균 성분, 파동 성분, 변동 성분으로 분해하는 삼중 분해법이다. 삼중 분해법은 흐름 내의 고유 구조를 추출하는 것을 가능하게 하여 다양한 연구에서 사용되어왔다. 삼중 분해법을 구현하기 위해 이용되는 방법론 중 하나로, 공분산 행렬을 이용하여 유속장을 분해하는 방법인 적합 직교 분해법이 많이 사용된다. 본 연구에서는 원기둥 후류에 적합 직교 분해법을 사용하여 삼중 분해법을 시행하고, 후류의 흐름 구조를 분석하는 것을 목표로 하였다. 영상 유속계를 사용하여 실험을 통해 원기둥 후류의 수평 유속장을 측정하였고, 측정 자료에 적합 직교 분해법을 적용한 결과, 첫 두 모드에서 큰 규모의 와류가 파동 형태로 전파되는 것이 관찰되어 고유 구조의 존재를 확인할 수 있었다. 해당 성분을 삼중 분해법의 파동 성분으로 상정하였고, 푸리에 분석을 적용한 결과에서도 원기둥 후류의 고유 진동수가 뚜렷하게 나타나는 것을 확인하였다. 또한, 원기둥 후류의 에너지 전달 구조를 확인하기 위하여 에너지 방정식에 삼중 분해법을 적용하여 식을 유도하고, 실험 자료로부터 각 항을 계산하여 비교해보았다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.11
• /
• pp.1645-1654
• /
• 2003

When vortex shedding is locked-on to a single frequency oscillatory flow, the variations of vortex dynamics are investigated using a time-resolved PIV system. Wake regions of recirculation and vortex formation, dynamic behavior of the shed vortices and the Reynolds stress fields are measured in the wake-transition regime at the Reynolds number 360. In the lock-on state, reduction of the wake region occurs and flow energy distributed downstream moves upstream being concentrated near the cylinder base. To observe the dynamic behavior of the shed vortices, the trajectory of the vortex center extended to the inside of the wake bubble is considered, which describes well the formation and evolution processes. The Reynolds stresses and their contributions to overall force balance on the wake bubble manifest the increase of the drag force by the lock-on.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.2146-2150
• /
• 2008

본 연구에서는 용기포항 동방파제 건설이 사곶 수욕장에 미치는 영향을 평판재하시험, 토질분석시험, 위성사진 자료 분석, 파랑, 조류, 수심 등의 현장관측과 파랑, 파랑류, 조류, 그리고 퇴적물 이동 등에 대한 수치모형을 통하여 사곶해수욕장의 동역학적 특성을 파악하였다. 평판재하시험과 토질분석시험 결과 기존의 사곶해수욕장 지역의 지지력 변화는 거의 없는 것으로 나타났으며, 방파제 건설로 인해 퇴적이 진행 중인 지역은 상대적으로 지지력이 낮게 나타났다. 현장관측으로 수집된 파랑, 조류, 수심의 자료는 수치모형의 입력 값으로 사용되었으며, 파랑류 수치모형결과 사곶 해수욕장 부근에서 파향에 따라 약한 소규모 와류가 발생하였으며, 퇴적물이동 수치모형의 경우 국소 와류에 의한 지형변화가 발생하였으며, 남서와 북동에 약간의 퇴적이 발생하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.4
• /
• pp.846-856
• /
• 2001

An experimental study has been made to investigate the effect on wake flow and vortex shedding frequency by vortex stabilizer in Karman vortex type air flow sensor. The conditions investigated include 3 types of shapes and 3 types of separation distances of the vortex stabilizer. The phase averaged technique and smoke-wire flow visualization method are used to understand the detail information. The rolling up position of shear layer is fixed by the influence of the vortex stabilizer. Especially, the convex type vortex stabilizer has shown the more stable repeatability and linearity regarding the vortex shedding frequency compared to the other types.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.5 no.2
• /
• pp.83-90
• /
• 2002

An experimental study was conducted to investigate the effects of a leading edge extension(LEX) on the vortex flow field over a delta wing by measuring the total pressure distribution in a subsonic wind tunnel. Freestream velocity was 40m/sec and Reynolds number per meter was $1.76{\times}10^6$. The wing with the LEX experienced a strong interaction between the LEX and wing vortices. As the angle of attack increased, the coupled vortex field of these two vortices maintained its strength and concentricity much better than the vortex field over the wing without the LEX.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.3
• /
• pp.56-64
• /
• 2013

The wind resistant capacity of bridges with a span of less than 200m is typically evaluated by Wind Resistant Design Manual for Highway Bridges in Japan. Also, the first vertical frequency plays an important role in the evaluation of their aerodynamic performance. An unexpected vortex-induced vibration of Nielsen arch bridge with span of 183m designed by this manual has been measured by monitoring system during typhoon. The amplitude of vibrations was about 2 times than the allowable vibration displacement. This paper presents the feature of vortex-induced vibration of this Nielsen arch bridge based on measured wind velocity, wind direction, and responses at midspan of main girder. From the result of FFT, the $1^{st}$ mode shape of the bridge is antisymmetric and the $2^{nd}$ is symmetric. Also, the dominant vibration of the bridge is the $2^{nd}$ vertical mode. According to these results, the $2^{nd}$ vertical vibration mode of this Nielsen arch bridge is prior to the first for the estimation of wind resistance capacity.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.2 no.2
• /
• pp.70-77
• /
• 1999

The disturbance of oil-water interface confined between tandem fences caused by a sequence of traveling vortices below the interface is investigated. The traveling vortices are assumed to be those detached from the tip of the fore fence. The potential flow is assumed and the density interface is replaced as a sheet of vortex. The shape of the interface is predicted by tracing a finite number of marker particles placed at the interface. The velocity of the marker particles is determined by the Biot-Savart integral along the vortex sheet plus the contribution from the traveling point vortices. The rate of change of vortex-sheet strength is predicted by using an evolution equation for vorticity. The calculated results obtained for various conditions demonstrate that the large amplitude of interfacial wave following the moving vortek can be generated by the vortices.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.449-452
• /
• 2008

Flow difference between reacting and non-reacting case in a swirl stabilized annular combustor is investigated using 3D Large Eddy Simulation with flamelet turbulent combustion model. The combustor of concern is the LM6000, lean premixed dry low-NOx annular combustor, developed by GEAE. Boundary conditions are based on experimental data. Heat release as a result of combustion put the dilatation of density in primary combustion zone highly increased so that the main swirl stream behind of a swirl cup stretched further downstream than that of non-reacting case. The oval shape of core flow in cross-section to flow direction, which clearly observed in non-reacting case, tends to be circle, and small vorticities in wide range in non-reacting case disappears, but the size of iso-vorticity increase in reacting case.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.4
• /
• pp.50-56
• /
• 2012

Vent mixer can provide main flow directly into a recirculation region downstream of the mixer to enhance fuel-air mixing efficiency. Based on experimental results of three-dimensional velocity, vorticity and turbulent kinetic energy obtained by a stereoscopic PIV method, the performance of the vent mixer was compared with that of the step mixer which was used as a basic model. Thick shear layers of the vent mixer induced the increase of the penetration height. The turbulent kinetic energy mainly distributed along a boundary layer between the main flow and the jet plume. This turbulent field activates mass transfer in a mixing region, leading to the mixing enhancement.

• Journal of Navigation and Port Research
• /
• v.37 no.1
• /
• pp.1-7
• /
• 2013

In this paper the developed prediction technique of wave-making resistance performance for a ship attached with a vertical blade had been verified. Numerical analysis program as a prediction technique had been developed using the Rankine source panel method and the vortex lattice method(VLM). The nonlinearity of the free surface conditions was fully taken into account using the iterative method and the trim and the sinkage of the ship were also considered in the numerical analysis program. Panel cutting method was applied to get hull surface panels. Numerical computations were carried out for a 4000TEU container carrier and the vertical blade was attached 6 different locations astern. To investigate the validity of the numerical analysis program the commercial viscous flow field analysis program FLUENT was used to obtain the viscous flow field around the ship and the model test was performed. The model test results were compared with the numerical analysis results.