• Product Safety
• /
• s.98
• /
• pp.76-79
• /
• 2002

임피던스(impedance)는 교류에서의 전압의 전류에 대한 비(比)로서, 직류에서의 저항(resistance)에 해당한다. 저항(抵抗)은 전류의 흐름을 방해하도록 작용하는 것으로서 기호는 R, 단위는 옴($\Omega$)으로 나타낸다. 저항을 R, 양끝에 가하는 직류전압을 E[V], 흐르는 전류를 I[A]라 하면, R[$\Omega$]=E/I로 된다.

• 한국정보통신설비학회:학술대회논문집
• /
• 2004.08a
• /
• pp.215-218
• /
• 2004

통신서비스를 제공하는 전송매체인 동케이블(copper cable)은 외륵 전자기적 영향으로부터 작업자 및 시설보호를 위해 $300{\sim}500m$ 마다 접지를 하고 있다. 접지는 일반 보안용 접지와 차폐용 접지로 구분할 수 있는데 보안용 접지는 100옴 이하의 접지저항을 요구하지만 차폐용 접지는 10옴 이하의 낮은 접지저항을 필요로 한다. 차폐용 접지는 대표적으로 전력선 또는 전철시설로부터 발생하는 통신선에서의 유도전압(Induced voltage)을 경감시키기 위해 사용되는 것으로 차폐케이블, 유도중화코일, 차폐선 등의 선로시설에 필요하다. 본 논문은 차폐용 접지를 시공하기 위해 적용하는 접지저감재를 활용한 보링접지 시공기술에 관한 것으로 접지저항 산출방법과 산출식에 필요한 파라메터와의 관계 등을 실제 시공결과와 비교하며 분석하였다.

• Transactions of the Korean hydrogen and new energy society
• /
• v.28 no.6
• /
• pp.663-668
• /
• 2017

SOFC anode fabricated core-shell using machano-fusion method using core with submicron size Ni, nano size YSZ for shell. Using prepared core-shell, depending on the thickness of the shell, we studied how the characteristics of sintering and SOFC cell change by sintering the anode. The Ni-YSZ core-shell has a Ni core of 0.5 to $1.2{\mu}m$ over 2 to 7 YSZ of 15 to 20 nm is, and as the high speed mixing time increases, the YSZ number increases and the shell thickness becomes uniform increased. When the fuel electrode is manufactured with core-shell, it has superior sintering property, has grain of uniform size compared with the one synthesized by general mixing, the falling path is short, the conductors (electrons and ions) connection is excellent, the electrical conductivity has become excellent. The thicker the shell, the lower the electrical conductivity. When the thickness of shell ranged from 46 to 139 nm and 61 to 81 nm, the performance was the highest and the ASR was the smallest.

• Clean Technology
• /
• v.16 no.4
• /
• pp.297-303
• /
• 2010

Effect of interconnect structure on the cell performance in anode-supported tubular solid oxide fuel cell (SOFC) has been investigated in this study, employing the Fluent CFD solver. For the robust and reliable theoretical analysis corroborating experimental results, it is of great importance to elucidate the role of interconnect which is electrically connected with electrodes on the cell characteristics. From the fact that the thin interconnect provides the enhanced cell performance, it is revealed that the interconnect thickness is a key parameter that is able to effectively control the ohmic resistance. Under the constant thickness condition, the cell performance does not considerably change with the variation of interconnect width. This is because the current passage along with circumferential direction is not effectively altered by the change of interconnect width in tubular SOFC system.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.10
• /
• pp.25-32
• /
• 2012

The application of electrical resistivity, which is related to charge mobility, has increased in the field of geotechnical engineering for the detection of underground cavern, faults and subsurface pollution level. The purpose of this study is to investigate the variation of electrical resistivity due to temperature change. Sand-silt mixture specimens prepared in the square freezing nylon cell are frozen in the frozen chamber. Four electrodes are attached on the four side walls of the freezing cell for the measurement of electrical resistance during temperature change. Electrical resistances of sand-silt mixtures with different degrees of saturation (0%, 2.5%, 5%, 10%, 20%, 40%, 60% and 100%) are measured as the temperature of specimens decrease from $20^{\circ}C$ to $-10^{\circ}C$. The electrical resistances determined by Ohm's law are transformed into the electrical resistivity by calibration. Experimental results show that the higher degree of saturation, the lower electrical resistivity at $20^{\circ}C$. Electrical resistivity gradually increases as the temperature decrease from $20^{\circ}C$ to $0^{\circ}C$. For the specimens with the degree of saturation of 15% or higer, electrical resistivity dramatically changes near the temperature of $0^{\circ}C$. In addition, very high electrical resistivity is observed regardless of the degree of saturation if the specimens are frozen. This study provides the fundamental information of electrical resistivity according to the soil freezing and temperature change demonstrates that electrical resistivity be a practical method for frozen soil investigation.

• Transactions of the Korean hydrogen and new energy society
• /
• v.28 no.1
• /
• pp.40-46
• /
• 2017

We reviewed the electrical properties of SOFC anode manufactured using spherical Ni and nano YSZ powder. When core-shell is fabricated by using submicron Ni as core and nano-sized YSZ as shell for SOFC anode, the electrical conductivity of the $0.2{\mu}m$ Ni-YSZ core-shell was 3 times higher than that of $1.0{\mu}m$ NiO or $1.0{\mu}m$ Ni-YSZ. Hydrogen selectivity was similar at $800^{\circ}C$, but hydrogen selectivity and methane conversion rate under $750^{\circ}C$ was 10~25% higher, Power density was more than 2 times, ASR was about 1/3, when exposed to $H_2$ atmosphere at $750^{\circ}C$ for a long time, Ni particles did not have any growth or cut off conduction path.

• Proceedings of the KAIS Fall Conference
• /
• 2007.05a
• /
• pp.192-194
• /
• 2007

본 논문에서는 금속체에 RFID 태그 안테나를 부착 시 태그 인식이 가능하도록 태그 안테나를 설계 및 제작하였다. 기존 도체 태그용 RFID 안테나는 크기가 큰 단점이 있으나, 본 논문에서는 미앤더 구조를 제안하여 안테나 크기의 소형화에 중점을 두었다. 2 개의 유전체를 결합하여 도체에서의 특성 감소를 최소화 하였고 급전부와 단락부의 간격조절로 사용된 칩 저항인 77-j100옴과의 conjugate 매칭을 유도 하였다. 태그의 크기는 30 ${\times}$ 40 mm로 기존의 태그안테나에 비해 소형임에도 임피던스 특성을 얻을 수 있음을 확인하였다. 대역폭은 UHF대역을 만족하는 $900MHz{\sim}921MHz$를 얻었고, 도체에 태그를 부착 후 인식거리 측정에 있어서도 기존 제품과 유사한 특성을 얻었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.139-142
• /
• 2009

In this study, the performance degradation of SOFC single cell caused by the delamination between a cathode and an electrolyte is investigated. As the delamination rate increases, the voltage sharply decreases due to the decrease of reaction sites and losses increase. The current is concentrated to the intact area so that the current density is increased and the ohmic loss and the activation loss become higher. Most part of loss is due to the ohmc loss of electrolyte.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.16 no.2
• /
• pp.149-160
• /
• 2014

The objective of this study is the application of the harmony search (HS) algorithm and verification of the accuracy of inverse analysis to predict the location, thickness and electrical properties of anomalous zone ahead of tunnel face when utilizing the electrical resistivity survey using electrical resistivity of the ground. The relationship correlating the characteristic values of the anomalous zone with the electrical resistance values was derived using Gauss' laws and Ohm's laws. Inverse analysis program was developed to predict anomalous zone by using electrical resistivity based on HS algorithm. Electrical resistance measuring system is devised to obtain the electrical resistivity of the ground, and laboratory tests were performed on anomalies to verify the proposed HS algorithm. The test results show that the characteristics of the anomalies are predicted reasonably well resulting in less than 5% error when predicting the location and thickness of the anomaly.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.1
• /
• pp.203-209
• /
• 2019

In this work, a new land-specific resistance measuring device (GM) and a measuring probe (Grounding Rod) are connected to the WENNER quadrant as power-line communication (PLC). In groups of two (P1,P2) probes, five to ten probes are installed in series on the ground at intervals of 1m, 2m, 4m, 8m, and 16m, respectively. If the PLC signal from the GMD is detected by the receiver of the Probe 1 (P1) for measurement, the minute voltage and current for measurement flow from the PSD (power supply) attached to the probe to the ground, and then, through the soil between P1 and P2, enters the Probe 1 (P2). The resistance value is then measured by the principle of voltage drop due to ground resistance. Measure the earth resistance every T seconds up to 1 trillion and store the measured data on the Arduino Server mounted on the main equipment. Stored measurement data can be derived from formulas by Ohm's Law and from inherent resistance (here,). Data obtained in real time will be linked to CDGES programs installed on Main PC, enabling data analysis and real-time monitoring of the ground environment on land. In addition, a three-dimensional display is possible with 3D graph support by identifying seasonal characteristics such as temperature and humidity of land (soils). The limitations of the study will require specific application measures of Test Bed for commercial access to a model that has been developed and operated experimentally.