• Proceedings of the Korean Society of Computer Information Conference
• /
• 2022.07a
• /
• pp.149-152
• /
• 2022

최근 전기차의 기술 발전이 급속도로 증가함에 따라 이차전지의 수요가 증가하게 되었다. 그로인해 다량의 고품질 전지를 생산하기 위해 제조 공장이 가동되고 있지만 생산된 전지의 품질의 핵심이 되는 화성공정의 에이징 과정 진행 중 온도 관리에 실패할 경우, 전지의 폭발 및 화재의 위험이 있다. 본 논문은 이차전지를 생산하는 에이징 공정의 효율적인 온도 관리를 위해 목업 모형을 만들어 온도 센서를 통한 온도 수집 및 모니터링 시스템을 개발하고, 공조기 바람을 통해 전지의 온도가 변화하는 속도를 계산하고, 이상온도에 도달해 고온의 상태가 되었을 경우 주변 전지로 전달되는 열을 시뮬레이션 통한 효율적인 공조 대책을 제시하여 이차전지 생산의 품질 향상과 화재 예방을 통해 전기차 생산에 따른 리튬이온 전지의 수요 해결에 기여한다.

• Coastal and Ocean
• /
• v.6 no.1
• /
• pp.9-19
• /
• 2013

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.9
• /
• pp.881-889
• /
• 2015

Ocean thermal energy conversion is an organic Rankine cycle that generates power using the temperature difference between surface water and deep water. This study analyzes the thermodynamic efficiency of the cycle, which strongly depends on the working fluid and the cycle configuration. Cycles studied included the classical simple Rankine cycle, Rankine cycles with an open feedwater heater and an integrated regenerator, as well as the Kalina cycle. Nine kinds of simple refrigerants and three kinds of mixed refrigerants were investigated as the working fluids in this study. Pinch-point analysis that set a constant pinch-point temperature difference was applied in the performance analysis of the cycle. Results showed that thermodynamic efficiency was best when RE245fa2 was used as the working fluid with the simple Rankine cycle, the Rankine cycles with an open feedwater heater and an integrated regenerator, and when the mixing ratio of $NH_3/H_2O$ was 0.9:0.1 in the Kalina cycle. If the Rankine cycles with an open feedwater heater, an integrated regenerator, and the Kalina cycle were used for ocean thermal energy conversion, efficiency increases could be expected to be approximately 2.0%, 1.0%, and 10.0%, respectively, compared to the simple Rankine cycle.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.18 no.1
• /
• pp.22-28
• /
• 2015

The design on a riser in 1MW OTEC system is performed. The minimum diameter of the riser is decided depending on intake quantity of deep-sea water to supply an OTEC cycle. An applicable pipe material is selected from analyzing the properties of commercial pipes. The selected HDPE pipe with the low density and strength is reinforced with a lumped block attached at the end of and wire ropes along the riser. A lumped block, connected to a floating structure by wire ropes, with 25% and 50% weight of a GFRP riser is designed to be attached the end of a riser. The structural safety of the HDPE riser with wire rope supporting axial loads induced by a lumped block is analyzed under the harsh ocean environmental condition near Hawaii ocean with the numerical method. The final dimension of the riser and accessories is determined considering the economic point of view. The designed riser will be applicable to the construction of the 1 MW OTEC pilot plant.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.30 no.1
• /
• pp.18-24
• /
• 2001

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.30 no.1
• /
• pp.9-17
• /
• 2001

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.5
• /
• pp.595-602
• /
• 2012

In this study, for the purpose of reduction of $CO_2$ gas emission and to increase recovery of waste heat from ships, the ORC (Organic Rankine Cycle) is investigated and offered for the conversion of temperature heat to electricity from waste heat energy from ships. Simulation was performed with waste heat from the exhaust gasse which is relatively high temperature and cooling sea water which is relatively low temperature from ships. Various fluid is used for simulation of the ORC system with variable temperature and flow condition and efficiency of system and output power is compared. Finally, 2,400kW output power is obtained by system optimization of the preheater and reheater utilizing waste heat form sea water cooling system.

• Journal of Energy Engineering
• /
• v.3 no.2
• /
• pp.179-186
• /
• 1994

본 연구는 지역난방용 열병합발전시스템의 열에너지 이용을 최대화하므로 1차에너지의 소비량을 감소시키는데 그 목적이 있으며, 이를 위한 한가지 방안으로 열추종 운전범위내에서 온도에 따른 지역난방 운전방법을 분석검토하였다. 운전가능한 지역난방 공급 및 회수온도에 따른 지역난방 운전방법을 분석검토하기 위하여 수치해석 프로그램 CHPSIM을 사용하여 열병합발전시스템의 열적상태와 열추가소비량을 계산하였다. 지역난방의 온도수준을 120/$65^{\circ}C$에서 95/4$0^{\circ}C$로 저하시킴으로서 년간 열추가 소비량을 24.7% 감소시킬 수 있으며, 90/4$0^{\circ}C$로 저하시키면 29.6%의 절약이 가능하다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.8
• /
• pp.1151-1157
• /
• 2012

Ocean Thermal Energy Conversion(OTEC) technology is one of the new and renewable energy that utilizes the natural temperature gradient that exists in the tropical ocean between warm surface water and the deep cold water, to generate electricity. The selection of working fluid and the OTEC cycle greatly influence the effect on the system operation, and it's energy efficiency and impacts on the environment. Working fluids of the OTEC are ammonia, R22, R407C, and R410A. In this paper, we compared boiling pressure to optimize OTEC system at $25^{\circ}C$. Also, this paper showed net-power and efficiency according to working fluids for closed cycle and regeneration cycle.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1999.11a
• /
• pp.47-51
• /
• 1999

차세대 석탄가스화복합발전(Integrated Gasification Combined Cycle; IGCC)으로써 고온정제(Hot Gas Clean-up; HGCU)는 고온고압의 석탄가스 중에 있는 불순물을 고온고압에서 제거하는 기술이다. 현재 이 기술에 대한 연구가 국내외적으로 활발히 이루어지고 있으며 특히 미국 에너지성에서는 2000년까지 플랜트 효율 45%의 건식 고온정제를 채용한 IGCC 시스템을 개발 중에 있으며 나아가 목표 효율 50% 이상으로 건식 고온 정제뿐 아니라 차세대 가스터빈을 채용한 시스템으로 2010년 개발을 목표로 하고 있다.(중략)