• Korean Journal of Environmental Agriculture
• /
• v.32 no.3
• /
• pp.193-200
• /
• 2013

BACKGROUND: Plant factory system of an artificial light type using Light-Emitting Diodes (LEDs), fluorescent light, or metal halide lamp instead of sun light is an ultimated method for plant production without any pesticides regardless of seasonal changes. The plant factory is also completely isolated from outside environmental conditions such as a light, temperature, or humidity compared to conventional greenhouse. Light-environment control such as a quality or quantity in the plant factory system is essential for improving the growth and development of plant species. However, there was little report that the effects of various light qualities provided by LEDs on Ledebouriella seseloides growth under the plant factory system. METHODS AND RESULTS: Ledebouriella seseloides seedlings transplanted at urethane sponge were grown in the plant factory system of a horizontal type with LED artificial lights for 90 days. Yamazaki solution for hydroponic culture of the seedlings was regularly irrigated by the deep flow technique (DFT) system on the culture gutters. Electrical Conductivity (EC) and pH of the solution was recorded at 1.4 ds/m and 5.8 in average, respectively during the experimental period. Number of unfolded leaves, leaf length, shoot fresh and dry weight of the seedlings were three times measured in every 30 days after beginning of the experiment. Blue LEDs, red LEDs, and fluorescent lights inside the plant factory were used as light sources. Conventional fluorescent lamps were considered as a control. In all the treatment, light intensity was maintained at $100{\mu}mol/m^2/s$ on the culture bed. Fresh weight of the seedlings was 3.7 times greater in the treatment with the mixture radiation of fluorescent light and blue+red LEDs (1:3 in energy ratio; Treatment FLBR13) than in fluorescent light treatment (Treatment FL). In FLBR13 treatment, dry weight per seedling was two times greater than in FL or BR11 treatment of blue+red LEDs (1:3 in energy ratio; Treatment BR11) during the culture period. Increasing in number of unfolded leaves was also significantly affected by the FLBR13 treatment comparing with BR11 treatment. CONCLUSION(S): Hydroponic culture of Ledebouriella seseloides seedlings was successfully achieved in the plant factory system with mixture lights of blue, red LEDs and fluorescent lights. Shoot growth of the seedlings was significantly promoted by the FLBR13 with the mixture radiation of fluorescent light, blue, and red LEDs under 1:3 mixture ratio of blue and red LEDs during the experimental period compared to conventional light conditions.

• Journal of Bio-Environment Control
• /
• v.22 no.4
• /
• pp.291-297
• /
• 2013

The objective of this study was to know the growth response and light use efficiency of leaf lettuce (Lactuca sativa L.) 'Yorum Cheongchukmyeon' (green leaf lettuce) and 'Hongyom Jeokchukmyeon' (red leaf lettuce) under different RGB (Red:Green:Blue) ratio in a closed-type plant factory system. The plants were hydroponically cultured with a 12-h photoperiod at $20{\sim}25^{\circ}C$, 60~70% RH and 600~900 ${\mu}mol{\cdot}mol^{-1}$ $CO_2$. The light treatments were combined in three colors LEDs (red, blue, and white) and RGB ratios (1 : 4 : 5, 5 : 0 : 5, 5 : 2 : 3, 7 : 0 : 3, 7 : 1 : 2, and 8 : 1 : 1), however, as the light intensities of treatments were different. Growth characteristic response in both lettuces were significantly as affected by interaction between cultivar and light quality, when they were grown under different light quality conditions. Plant heights of green and red leaf lettuce were the lowest in 1 : 4 : 5 and 8 : 1 : 1, respectively. The highest length and number of leaf were showed 8 : 1 : 1 and 7 : 0 : 3 for the green and 5 : 2 : 3 and 8 : 1 : 1 for the red, respectively. Shoot dry weights of green and red leaf lettuce were the heaviest in 7 : 0 : 3 and 8 : 1 : 1, respectively. Leaf width and leaf shape index were significant about cultivar and light quality. Leaf widths of green and red leaf lettuce were the largest in 8 : 1 : 1 and 5 : 2 : 3, respectively. Leaf shape index of green and red leaf lettuce were the largest in 1 : 4 : 5 and 1 : 4 : 5, respectively. Shoot fresh weight and light use efficiency were significant about cultivar and light quality. Shoot fresh weights of green and red leaf lettuce were the heaviest in 7 : 0 : 3 and 8 : 1 : 1, respectively. Light use efficiencies of green and red leaf lettuce were the highest in 7 : 0 : 3 and 5 : 0 : 5, respectively. These results suggested that the ratio of RGB was 5~7 : 0~2 : 1~3 to cultivate leaf lettuce in a plant factory system.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.87.3-88
• /
• 2017

한국천문연구원은 차세대소형위성 1호의 근적외선 영상분광기 NISS (Near-infrared Imaging Spectrometer for Star formation history) 탑재체를 개발하여 2017년 6월 30일에 최종 비행모델을 납품하였고, 이 발표는 탑재체 NISS 구조체의 비행모델 개발 결과를 보고한다. NISS는 0.9 - 2.5um (R~20) 근적외선 파장에서 관측을 해야 하기 때문에, 구조체의 배경잡음을 없애기 위해서 200K까지 passive cooling으로 냉각되며, H2RG 검출기는 소형 냉동기에 의해 약 88K에서 운영된다. NISS 구조체의 passive cooling을 효율적으로 수행하기 위해서 방열판, Kevlar 지지대, MLI, 표면제어용 필름 등을 조립하였고, 실제 지상 시험을 통해서 그 성능을 확인하였다. NISS 구조체는 최종 시스템 조립 과정에서 전자부 하네스 조립을 함께 수행했으며, 온도 모니터링 센서를 부착하고 소형 냉동기 피드백 온도를 반복 시험을 통해서 결정하였다. NISS 구조체는 미러 및 렌즈를 지지하는 광기계부를 함께 포함하기 때문에 발사 및 우주환경에서 광학 성능을 유지하기 위한 설계를 거쳐서 제작 되었으며, 최종 시스템 검교정 시험, 진동 및 열진공 시험을 통해서 그 성능을 확인하였다. NISS를 탑재한 차세대소형위성 1호는 2018년 상반기에 미국의 Falcon 9 발사체에 실려서 발사될 예정이다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.12
• /
• pp.1301-1307
• /
• 2011

Electrosurgical knee wand (EKW) is a high-frequency thermocautery instrument and is often used for coagulation, ablation, excision, and extirpation of knee ligaments and tissues. In order to maximize the success rate, ease, and safety of knee surgery using EKW and radiofrequency ablation, it is necessary to ensure that the EKW selectively approaches the lesion with utmost accuracy and safety. The key feature of this instrument is its excellent maneuverability. Hence, the authors constructed a tensile spring model based on a shape memory alloy (SMA), which exhibits the shape memory effect. This model can be used in knee surgery as it is considered the most biocompatible femorotibial surgical actuator. The changes in external temperature with current and the thermoelectric characteristics of the SMA were investigated. The relationship between the restoring force and the typical stroke (TS) in response to the conditions in the SMA tensile spring design were evaluated. In conclusion, as the diameter of the SMA tensile spring decreased, the maximum temperature increased. The strain in the actuator caused a stable and proportional increase in the force and induced current for up to 15s, but this increase became very unstable after 30s. Moreover, the relationship between the current and the TS was more stable than that between the current and the restoring force.

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.1
• /
• pp.39-46
• /
• 2017

In this research, considering the practical conditions at field, thermal cracking reducing method was suggested based on the comparative analysis between predicted value and actual value obtained from the actual structure member with optimum mix design. The optimum mix design was deduced from the various mix designs with various proportions of cementitious binder for upper and lower placement lifts of mat-foundation mass concrete. Therefore, before field applications, the mix designs were obtained from the theoretical analysis obtained by MIDAS GEN for upper lift was OPC to FA of 85 to 15, and for lower lift was OPC to FA to BS of 50 : 20 : 30. Based on this mix design, the actual concrete for field was determined and all concrete properties were reached within the predicted range. Especially, the temperature properties of mass concrete at core was approximately $39^{\circ}C$ of temperature difference for low-heat mix design, while approximately $54^{\circ}C$ was shown for normal mix design currently used. Additionally, in the case of cracking index, the low heat mix design showed about 1.4 of relatively high value while the normal mix design showed 1.0. Therefore, it can be stated that applying low heat mix design and different heating technique between upper and lower placement lifts for mass concrete are efficient to control the thermal cracking.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.386-391
• /
• 2021

Turbocharging is becoming a key technology for both diesel and gasoline engines. Regarding gasoline engines, turbocharging can help reduce carbon dioxide (CO2) emissions when used in conjunction with other technologies. This paper presents measurements of the turbine efficiency of pulsating flow in a twin-scroll turbocharger for gasoline engines. A cold gas test bench with a pulse generator was manufactured. The turbine efficiencies were calculated using the measured data of the instantaneous pressure and temperature of the inlet and exit of the turbine. The measurements were carried out at turbine speeds from 60,000 to 100,000 rpm under a pulsating flow of 25.0 Hz and 33.0 Hz. The turbine efficiencies ranged from 0.517 to 0.544. At the pulse frequency, 33.3 Hz, the variations in efficiency were 7.7% and 2.6% at turbine speeds of 60,000 rpm and 100,000 rpm, respectively. The turbine efficiency of the pulsating flow compared to those of steady flow was 7.0% and 3.0% lower at a turbine speed of 60,000 rpm and 100,000 rpm, respectively. The pulsating flow deteriorated the turbine efficiency, but the effects of pulsating flow decreased with increasing turbine speed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.415-421
• /
• 2021

This study analyzed the effect on the cooling performance of the channel shape of a heat sink for an insulated gate bipolar transistor (IGBT). A serpentine channel was used for this analysis, and the parameter for the analysis was the number of curves. The analysis was conducted using computational fluid dynamics with the commercial software ANSYS fluent. One curve in the channel improved the heat dissipation performance of the heat sink by up to 8% compared to a straight-channel heat sink. However, two curves in the channel could not improve the heat discharge performance further. Instead, the two curves caused a higher pressure drop, which induces parasitic loss for the pumping of coolant. The pressure drop of the two-curve channel case was 2.48-2.55 times larger than that of a one-curve channel. This higher pressure drop decreased the heat discharge efficiency of the heat sink with two curves. The discharge heat per unit pressure drop was calculated, and the result of the straight heat sink was highest among the analyzed cases. This means that the heat discharge efficiency of the straight heat sink is the highest.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10d
• /
• pp.24-29
• /
• 2006

본 논문에서는 광대역 통신 방송 융합 서비스 제공을 고려한 WDM 메트로 링 망을 위한 매체 접근 제어(Medium Access Control; MAC) 프로토콜의 성능을 분석한다. 현재 인터넷은 통신 방송 융합 망으로 진화하고 있으며 다양한 트래픽 특성을 갖는 서비스가 액세스 망에서 메트로 망으로 유입되고 있다. 그러나 기존 메트로 망의 MAC 프로토콜은 이러한 망 환경 변화를 고려하지 않고 단순하고 동일한 트래픽만을 고려하여 성능을 분석하였다. 따라서 본 논문에서는 메트로 링에 연결된 액세스 노드의 입력 트래픽을 Self-Similar와 Poisson 트래픽으로 분류하여 기존 MAC 프로토콜의 성능을 분석하고 평가한다. 메트로 링 망에 연결된 액세스 노드는 이 두 종류의 트래픽 중에서 하나를 망에 유입하며 채널을 공유하는 노드 수에 따라서 다양한 트래픽 환경이 고려된다. WDM 메트로 링망의 기본 MAC 프로토콜은 CSMA/CA(Carrier Sense Multiple Access with Collision Avoidance)이며, 패킷을 빈 슬롯에 전송하고 송신지에서 패킷을 제거하는 SS (Source-Stripping) 기반으로 운용된다. 본 논문에서는 SS 방식으로 생성된 빈 슬롯을 바로 패킷 전송에 이용하는 방식과 그렇지 않은 방식을 각각 1-Persistent와 non-Persistent로 분류하고 MAC 프로토콜을 분석하여 기존 방식의 장 단점을 비교한다. 또한 전송 공정성과 처리율을 같이 고려하여 적용할 수 있는 확률 기반 p-Persistent MAC 프로토콜도 분석하였으며 시뮬레이션을 통하여 각 프로토콜을 노드 처리율, 전송 지연, 패킷 손실률, 전송 공정성 관점에서 비교하고 평가한다.y 수행을 여러 서버로 분산처리하게 함으로써 성능에 대한 신뢰성을 향상 시킬 수 있는 Load Balancing System을 제안한다.할 때 가장 효과적인 라우팅 프로토콜이라고 할 수 있다.iRNA 상의 의존관계를 분석할 수 있었다.수안보 등 지역에서 나타난다 이러한 이상대 주변에는 대개 온천이 발달되어 있었거나 새로 개발되어 있는 곳이다. 온천에 이용하고 있는 시추공의 자료는 배제하였으나 온천이응으로 직접적으로 영향을 받지 않은 시추공의 자료는 사용하였다 이러한 온천 주변 지역이라 하더라도 실제는 온천의 pumping 으로 인한 대류현상으로 주변 일대의 온도를 올려놓았기 때문에 비교적 높은 지열류량 값을 보인다. 한편 한반도 남동부 일대는 이번 추가된 자료에 의해 새로운 지열류량 분포 변화가 나타났다 강원 북부 오색온천지역 부근에서 높은 지열류량 분포를 보이며 또한 우리나라 대단층 중의 하나인 양산단층과 같은 방향으로 발달한 밀양단층, 모량단층, 동래단층 등 주변부로 NNE-SSW 방향의 지열류량 이상대가 발달한다. 이것으로 볼 때 지열류량은 지질구조와 무관하지 않음을 파악할 수 있다. 특히 이러한 단층대 주변은 지열수의 순환이 깊은 심도까지 가능하므로 이러한 대류현상으로 지표부근까지 높은 지온 전달이 되어 나타나는 것으로 판단된다.의 안정된 방사성표지효율을 보였다. $^{99m}Tc$-transferrin을 이용한 감염영상을 성공적으로 얻을 수 있었으며, $^{67}Ga$-citrate 영상과 비교하여 더 빠른 시간 안에 우수한 영상을 얻을 수 있었다. 그러므로 $^{99m}Tc$-transierrin이 감염 병소의 영상진단에 사용될 수 있을 것으로 기대된

• Food Engineering Progress
• /
• v.21 no.3
• /
• pp.292-298
• /
• 2017

The aim of this study was to evaluate the effects of microencapsulation on the water absorption, DPPH radical scavenging activity (DRSA), hydroxyl radical scavenging activity (HRSA) and tyrosinase inhibition activity (TIA) in corn silk extracts. The lowest value (0.20) of water absorption index (WAI) and the highest value (95.23%) of water solubility index (WSI) were maltodextrin+cyclodextrin microencapulated corn silk extracts (MD+CD) and cyclodextrin encapulated corn silk extracts (CD), respectively. The 18.60% for DRSA value of control was increased to 89.25% for that of CD. The 16.89% for HRSA value of control was increased to 47.46%, and 7.16% for TIA value of control was increased to 39.35% for that of MD+CD, respectively. The MD+CD would be used for functional food and cosmetics materials as antioxidant and skin whitening agents. All investigated responses between control and treatment were statistically significant (p<0.05).

• Applied Chemistry for Engineering
• /
• v.22 no.4
• /
• pp.429-432
• /
• 2011

The feasibility of applications of the char obtained from a gasification process of municipal-waste refuse derived fuel (RDF) as an auxiliary fuel was evaluated by combustion experiments. The higher heating value of the RDF char was 3000~4000 kcal/kg and its chlorine content was below the standard requirement demonstrating its potential as an auxiliary fuel. In the combustion exhaust gas, the maximum $NO_x$ and $SO_2$ concentrations were 240 ppm and 223 ppm, respectively. If an aftertreatment is applied, it is possible to control their concentrations low enough to meet the air pollutant emission standard. The HCl concentration was relatively high indicating that a care should be taken for HCl emission from the combustion of RDF. Based on the temperature distribution within the reactor, the concentration change of $O_2$ and $CO_2$, and the amount and the loss on ignition of solid residue, it was inferred that the combustion reaction was the most reliable when the excess air ratio of 1.3 was used.