• Journal of the Korean Vacuum Society
• /
• v.22 no.1
• /
• pp.20-25
• /
• 2013

ZnO:Al thin films deposited by RF magnetron sputtering were post-annealed and the electrical and optical properties of ZnO:Al thin films were investigated before and after anneling. We confirmed that the ZnO:Al thin film was affected by post-annealing temperature. As post-annealing temperature increases, crystallinity and transmittance in visible area (400~800 nm) of ZnO:Al thin films decreased. While sheet resistance of thin films increased sharply with increasing to $400^{\circ}C$. This result is due to reduce of carrier concentration caused by absorption of $O_2$ or $N_2$ at surface of thin film.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.5
• /
• pp.9-16
• /
• 2001

End-gas temperatures were measured using CARS technique in a conventional DOHC spark- ignition engine fueled with PRF80. The measured pressure data were analyzed using band pass filter method. The measured CARS temperatures were compared with adiabatic core temperatures calculated from measured pressures. Significant heating by pre-flame reaction in the end gas zone was observed in the late part of compression stroke under both knocking and non-knocking conditions. CARS temperatures measured at 10 crank angle degree before knock occurrence was higher than adiabatic core temperatures. These results indicate that there exist some exothermic reactions in low pressure and temperature region. CARS temperatures began to be higher than the adiabatic core temperature when the end-gas temperatures reached look. The temperature elevation due to the pre-flame reaction correlated better with CARS temperature than with cylinder pressure.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.04a
• /
• pp.134.1-134
• /
• 2003

저장 전 키토산과 칼슘 처리와 저장고 형태에 따른 온주밀감의 저장 중 품질특성을 검토하였다. 항균제로서 베프란(iminoctadime-triacetate) 2,000배 희석액, 키토산 1.5%에 0.5% CaCl$_2$를 혼합한 용액에 감귤을 충분히 침지하였다. 풍건시킨 후 26L인 플라스틱 컨테이너에 감귤을 12kg 정도씩 담아 3$0^{\circ}C$에서 24시간동안 저장전 처리를 하고, 상온저장과 내부온도 4$^{\circ}C$, 상대습도 87%를 기준으로 저장하였다. 저장고내의 온습도 편차가 적은 저장고에서 낮은 부패율이 나타내어, 감귤저장 중 온도관리가 중요함을 알 수 있었다. 중량감소, 껍질과 과육의 수분 함량은 저장 중 서서히 감소하였으며, 저온저장에서 감소 폭이 적었다. 산 함량의 감소는 저장 4개월 동안 15-18%이었다. 비타민 C는 저장 중 감소가 많아 장기간 저장으로 감귤품질이 떨어짐을 알 수 있었다. 유리아미노산은 23종이 검출되었다. isoleucine, leucine은 저장감귤에서 검출이 되지 않았으며, 이와 반대로 alanine은 90일간 저장한 감귤에서만 검출되었다. 품질유지가 위한 청견의 저장은 3개월까지로 판단된다.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.86.3-86.3
• /
• 2017

2개의 케플러 접촉쌍성인 KIC 8804824와 KIC 10229723의 초정밀 측광 자료를 가장 최신 버전의 윌슨-디비니 코드로 분석하여 정밀한 측광 해를 산출하고, 그 잔차들을 매우 자세하게 조사하였다. 두 개의 케플러 접촉 쌍성은 제2식이 편평한 광도곡선을 가지고 있어, 이 두 쌍성은 W UMa형 A sub-group에 속한다. 또한, 광도곡선의 모양이 매우 대칭이며, 시간에 따른 변화가 크지 않다. 두 별의 측광 해를 살펴 본 결과, 두 별은 모두 주성의 온도가 부성의 온도보다 높고, 0.2보다 작은 극단적인 질량비와 90도에 거의 가까운 궤도경사각을 갖고 있다. 무엇보다도, 두 별의 측광 해의 잔차에서 공통적으로 전 위상에 걸쳐 모형화 되지 않은 특이한 구조를 발견하였다. 이 구조는 phase smearing 효과를 고려하더라도 그 구조의 모습만이 약간 달라질 뿐, 구조의 진폭에는 크게 영향을 미치지 않는 것을 발견하였다. 흥미롭게도 이 현상은 두 별의 주기가 각각 다름에도 불구하고 공통적으로 나타나며, 관측된 전 쿼터에 대해 나타난다. 이 현상의 가능한 원인에 대해 논의한다.

• Korean journal of applied entomology
• /
• v.19 no.4 s.45
• /
• pp.234-238
• /
• 1980

The relationships between the mean degree of hyphal growth in the leaf sheath and percent penetration in the leaf epidermis within the same predisposing temperature regime were highly significant. A positive relationship was found between degree of hyphal growth in the leaf sheath and Percent Penetration in the leaf epidermis.

• Proceedings of the KAIS Fall Conference
• /
• 2009.05a
• /
• pp.859-862
• /
• 2009

연소전 조건에서 물리적 흡수제로 사용되는 PEG를 이용하여 이산화탄소 흡수특성을 조사하였다. 회분식 기-액 평형반응기를 이용하여 PEG분자량, 흡수반응 온도와 압력 등의 다양한 조건에서 흡수능을 측정하였다. 실험결과 PEG의 경우 분자량이 작을수록 흡수능이 뛰어났으며 흡수반응온도가 낮을수록 흡수능이 우수하였다.

• Composites Research
• /
• v.37 no.3
• /
• pp.215-218
• /
• 2024

Liquid crystalline thermosetting epoxy oligomer DD-A was synthesized with Diglycidyl ether of 4,4'-dihydroxy-α-methylstilbene (DGE-DHMS) and aniline in a ratio of 2:1 and cured with a catalytic curing agent, 1-Methyl Imidazole. The gelation times and vitrification times were measured to create Time-Temperature-Transition Diagrams with liquid crystalline phase changes. It was found that the gelation and vitrification times were decreased as the concentration of curing agent increased, and the vitrification curve showing a typical S-shape was confirmed.

• Journal of the Korea Concrete Institute
• /
• v.26 no.4
• /
• pp.449-456
• /
• 2014

Material properties of geopolymer, whose the reaction is very complicated, have been influenced by chemical compositions and particle size distributions of fly ash, concentrations and types of alkali-activators and curing conditions such as temperatures and time. In this research, experiments with several variables such as curing temperatures, preset prior to the high temperature curing and high temperatures have been conducted in order to evaluate to investigate effects on the compressive strengths of geopolymer caused by curing condition. Experiment results were evaluated with compressive strengths and micro-structures such as SEM and MIP of geopolymer pastes. As a result, as higher curing temperature or longer preset time were applied to the pastes, higher compressive strengths were observed. However, compressive strengths of geopolymer pastes declined due to increases in macropores (>50 nm) under high temperatures elapsed after 24 hours. In this sense, it can be considered that strengths and microstructures of geopolymers depends on curing temperature and time.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.3
• /
• pp.252-257
• /
• 2000

To investigate the thermal preheating effect of the GaAs substrate exerted on the ZnS epilayers for the first time, ZnS epilayers were grown on the GaAs (100) substrate by hot wall epitaxy. The thermal preheating temperature was $450^{\circ}C$~$660^{\circ}C$. The full width at half maximum values of double crystal rocking curve were the smallest for the ZnS epilayers grown on the GaAs thermally preheated at around both $500^{\circ}C$ and $600^{\circ}C$. However, photoluminescence characteristics of ZnS epilayers were better at $600^{\circ}C$ than at $500^{\circ}C$. Therefore, it was shown that the optimum preheating temperature of the GaAs substrate for the growth of high quality ZnS epilayer was around $600^{\circ}C$. From these experimental results, it was shown that the crystal quality and the PL properties of ZnS epilayers were enhanced for the GaAs substrates thermally preheated at $600^{\circ}C$.

• Journal of Energy Engineering
• /
• v.24 no.2
• /
• pp.103-109
• /
• 2015

A heat recovery steam generator consists of inlet expansion duct and heat transfer tube bank modules. For the enhancement of heat transfer in the tube bank modules, the flow should be uniform before the 1st heat transfer tube bank module. The present study has been carried out to analyze the flow characteristics in the inlet expansion duct of a heat recovery steam generator by using numerical flow analysis. The aim of the present study is to establish the proper heat transfer mechanism in the heat transfer tube bank modules by the comparison of the heat transfer models, the case with the constant heat loss per unit volume and the case with heat loss by using inner and outer convective heat transfer coefficient of heat transfer tube. From the present research, it could be seen that the heat transfer mechanism with using inner and outer convective heat transfer coefficient derives more proper temperature distribution results and the acceptance criteria of the temperature distribution within ${\pm}10^{\circ}C$ before SCR is satisfied with using this heat transfer mechanism.