• Journal of the Society of Disaster Information
• /
• v.9 no.1
• /
• pp.56-64
• /
• 2013

The study examines the quiet pavement using fine-size aggregates and warm-mix technique to reduce traffic noise. In order to evaluate the quality of pavement, mix design and laboratory tests were carried out. Test results showed that using 10mm aggregates can reduce the cantabro loss compared with 13mm aggregates due to increase contact area between aggregates. Mixing and compaction temperatures of warm mix quiet pavement should be determined by gyratory compactor test because it is used high viscosity asphalt binder. Using warm-mix additive could reduce compaction temperature by about $15^{\circ}C$. Noise measurement and permeability tests were conducted at the test road for evaluation of the field performance. All of quiet pavements meet the standard of permeability and have sufficient porosity. Noise reduction of the quiet pavement using fine-size aggregates is more effective than that using 13mm aggregates. In particular, the effect of noise reduction was noticeable at low speeds.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.4
• /
• pp.32-39
• /
• 2009

The HCCI engine is a next generation engine, with high efficiency and low emissions. The engine may be an alternative to SI and DI engines; however, HCCI's operating range is limited by an excessive rate of pressure rise during combustion and the resulting engine knock in high-load. The purpose of this study was to gain a understanding of the effect of only initial temperature and thermal stratification for reducing the pressure-rise rate in HCCI combustion. And we confirmed characteristics of combustion, knocking and emissions. The engine was fueled with Di-Methyl Ether. The computations were conducted using both a single-zone model and a multi-zone model by CHEMKIN and modified SENKIN.

• Journal of Energy Engineering
• /
• v.27 no.4
• /
• pp.98-102
• /
• 2018

In order to improve the durability of components in the vehicle engine room, an experiment to improve the air cooling effect of components by installing a cooling duct using intake air aiming at four components, such as generator, battery, ECU and power steel oil, Respectively, experimental results show that the overall component temperature has been reduced, and the reduced temperature difference is in the order of generator, ECU, power steel oil and battery. In order to improve the temperature difference due to these components, it is necessary to optimize the design through the flow analysis in the duct in the future.

• Journal of Climate Change Research
• /
• v.3 no.4
• /
• pp.259-270
• /
• 2012

Mobile air conditioning(MAC) systems of light-duty vehicles consume the most energy among auxiliary parts. Vehicle $CO_2$ reduction policies in Korea, US EPA and EU include the strategies to reduce additional $CO_2$ by MAC operation with providing incentive for the high-efficient MAC technologies. It is under development how to estimate MAC $CO_2$ and to differentiate advanced or high-efficient MAC system in US EPA and EU. The additional energy by MAC operation would beaffected by not only driving patterns but also environmental conditions such as temperature and humidity. In this study, we estimated MAC $CO_2$ of Korean light-duty vehicles with various driving cycles and environmental conditions. Test results were corrected to reference conditions for varied temperature and humidity during tests to get the comparable data for test vehicles. The test results showed that high-efficient MAC technologies have potential to reduce MAC $CO_2$ approximately by 50%. Considering the rate of MAC $CO_2$ to vehicle $CO_2$, it is expected that the introduction of high-efficient MAC technologies would considerably reduce vehicle $CO_2$ emission in MAC operation.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05b
• /
• pp.579-582
• /
• 2012

본 논문에서는 쿨튜브를 적용한 식물공장 이중창호와 삼중창호의 열전달 차단성능을 3차원 수치해석을 통해 비교분석하였다. 이중창호 설계변수인 유입구의 개수와 중공층 두께조건에 따라 창호를 통해 식물공장 외부에서 내부로 유입되는 열전달량을 분석하였다. 쿨튜브를 통해 중공층으로 유입되는 공기속도가 이중창호에서는 0.95 m/s, 삼중창호의 경우는 0.50 m/s 이상일 때 창호를 관통하여 외부에서 내부로 유입되는 열에너지가 차단되는 결과를 얻었다. 삼중창호의 경우에 중공층 유입 공기속도를 0.50 m/s 이상으로 증가시킬 경우 오히려 식물공장 내부의 열에너지가 중공층으로 빠져나가 실내온도를 낮추는 효과가 나타났다. 본 연구의 결과를 바탕으로 국내 지역별 기후데이터의 온도조건을 고려한 분석을 추가적으로 진행할 계획이다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.46-46
• /
• 2021

국제사회는 1992년 기후변화협약 체결 이후 지구온도 상승을 2℃이하로 억제하는 등 기후변화 문제를 해결하기 위해 노력하고 있다. 그러나 1997년 선진국(38개국) 중심으로 2020년까지 탄소감축(교토의정서)을 선언하였음에도 불구하고, 미국, 중국 등의 감축의무 미참여로 인해 기후변화대응에 대한 한계를 노출한 바 있다. 그 이후 COP21(2015년)에서 모든 국가에 감축의무를 부여하는 신(新)기후체제를 출범함으로써 선진국뿐만 아니라 개발도상국도 2020년부터 탄소감축의무를 부담하게 되었다. 영국은 기후변화위원회의 권고에 따라 탄소중립경제(Net-Zero Economy) 실현을 위해 국가적 탄소배출 목표를 발표(2019년)하고 온실가스 배출 'Zero'를 기후변화법에 명시하여 모든 산업 인프라 및 환경에 적용시키려 한다. 전 세계에서 최초로 영국의 물산업 분야는 'Net Zero 2030 Routemap'을 발표하여 물산업분야의 탄소중립 실현을 위해 다양한 정책적 로드맵과 실행방안(시나리오)을 수립하였다. 이러한 실행방안은 국가정책에 부합하고 자국내 물기업의 탄소저감 실행계획의 수립을 지원하는데 그 목적이 있다. 구체적인 실행방안은 탄소중립 달성을 위해 비용, 효과, 기술수준 및 기간 등을 고려하여, ①수요주도형, ②기술주도형, ③자연친화주도형, 그리고 ④복합형으로 제시하고 있다. 실행시나리오에 따르면, 수요주도형은 상하수도 분야 수요관리 및 기술, 설비의 효율화를 통한 배출 저감 방안으로 2018~19년 기준, 총배출량 2.41MtCO2e에서 2030년까지 0.54MtCO2e으로 약 77%의 감소효과를 기대하고 있다. 기술주도형의 경우, 심각한 탄소배출 분야의 기술개발 및 혁신을 통해 배출량을 최소화하는 시나리오이며, 총배출량(2.41MtCO2e)을 0.10MtCO2e(약 96%)까지 감소시키기 위한 방안이다. 자연친화주도형은 물기업의 자산 및 그 외 지역에 자연친화적 환경조성을 통한 탄소상쇄방안을 중심으로 총배출량을 0.88MtCO2e(약 63%)까지 저감하는 효과를 나타낸다. 마지막으로 복합협은 시나리오별 실효성과 적용시기를 고려할 때 가장 효과적인 방안으로 약 74%의 저감효과를 나타내지만, 시기적절성, 효과성에서, 가장 최적의 방안으로 제시되고 있다. 본 연구는 이러한 영국 물산업 분야의 탄소중립 정책과 실행방안 분석하고 그 시사점을 제시함으로써 국내 물산업 분야의 탄소중립을 위한 구체적 실행계획 수립에 이바지하고자 한다. 물산업 분야의 탄소중립은 기존 물산업 가치사슬 변화 등 물산업 생태계 전반의 변화를 초래할 것이며, 이러한 변화는 국내 물산업의 자본·운영시장의 비용증가에 대한 도전과 신재생에너지 기술 등 탄소 중립 기술 습득 및 새로운 일자리 창출 등 신(新)시장체계에 대한 기회가 동시에 상존한다.

• Journal of the Korea Concrete Institute
• /
• v.20 no.2
• /
• pp.157-164
• /
• 2008

In order to raise efficiency in construction, construction period, construction costs etc. that have been problematic in the methods of hydration heat reduction thus far, this study has developed a new method. The principle of the developed construction method involves the laying of a heat conducting medium such as the heat pipe in the concrete, and through the fast conduction of heat by the heat pipe, the hydration heat occurring within the mass concrete is transferred to the exterior by which the internal hydration heat is reduced. If the study results of the onsite test are summarized, on application of existing hydration heat reduction methods, the highest temperature was reached in about 2$\sim$4 days, but when the heat pipe of this study was used, the period was reduced to within 24 hours. Moreover, when the thermal crack index was calculated with the method using the heat pipe as developed in this study, a value of 1.2 or higher was revealed, which is a level that can restrict the occurrence of cracks. Therefore, when the hydration heat control method using the heat pipe as developed in this study is applied, not only the effects of construction efficiency and reduction in construction period, but also outstanding economical effects can be expected.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.5
• /
• pp.675-681
• /
• 2014

This study was conducted to determine the optimal roasting temperature (90, 100, 110, and 120; fixed time of 20 minutes) of small black coffee beans under various roasting conditions. The roasting temperature range and fixed time were the same as our preceding study. After roasting, the general composition, isoflavone contents, and antioxidant activities were measured. As the results of the proximate composition analysis of small black beans according to roasting conditions, only moisture decreased among them, whereas other general compositions were not affected. The DPPH and ABTS radical scavenging activities were the highest at a roasting temperature of $120^{\circ}C$. Total polyphenol and total flavonoid contents were also highest at $120^{\circ}C$. Isoflavone contents showed a positive correlation with DPPH and ABTS radical scavenging activities, as well as total phenol and flavonoid contents. These results suggest that the optimal roasting conditions of small black beans were determined to be $120^{\circ}C$ for 20 minutes.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.6
• /
• pp.190-197
• /
• 2012

The purpose of this study was to evaluate thermal environment and heat budget of light thin layer green roof through an experiment in order to quantify its heat budget. Two concrete model boxes($1.2m(W){\times}1.2m(D){\times}1.0m(H)$) were constructed: One experiment box with Zoysia japonica planted on substrate depth of 10cm and one control box without any plant. Between June 6th and 7th, 2012, outside climatic conditions(air temperature, relative humidity, wind direction, wind speed), evapotranspiration, surface and ceiling temperature, heat flux, and heat budget of the boxes were measured. Daily maximum temperature of those two days was $29.4^{\circ}C$ and $30^{\circ}C$, and daily evapotranspiration was $2,686.1g/m^2$ and $3,312.8g/m^2$, respectively. It was found that evapotranspiration increased as the quantity of solar radiation increased. A surface and ceiling temperature of those two boxes was compared when outside air temperature was the greatest. and control box showed a greater temperature in both cases. Thus it was found that green roof was effective in reducing temperature. As results of heat budget analysis, heat budget of a green roof showed a greater proportion of net radiation and latent heat while heat budget of the control box showed a greater proportion of sensible heat and conduction heat. The significance of this study was to analyze heat budget of green roof temperature reduction. As substrate depth and types, species and seasonal changes may have influences on temperature reduction of green roof, further study is necessary.

• Korean Journal of Food Science and Technology
• /
• v.52 no.2
• /
• pp.177-182
• /
• 2020

This study evaluated the effect of steam heating, gamma irradiation, and ultraviolet (UV) irradiation on microorganism reduction in order to determine an effective sterilization method for red pepper powder. The effect of each treatment on the reduction of thermoduric bacteria and total aerobic bacteria in red pepper powder were as follows: 10 kGy gamma irradiation, reduction of 4 log and 6 log CFU/g, respectively; 12 mW/㎠ UV irradiation (264 nm UV-C), reduction of less than 1 log CFU/g; steam heating at 120℃ for 40 s, reduction of approximately 2 log CFU/g. High-temperature short-time processing at 110℃ for 30 s reduced the total bacterial count in Gochujang solution from 5.70 log CFU/g to 2.26 log CFU/g; at 121℃, the solution was commercially sterile. Steam heating resulted in 1, 2, and 4 log microbial inactivation in garlic, onion, and pepper powder, respectively. Steam sterilization, which consumers prefer over other methods, may be an effective method for reducing microorganisms in spice powders, including those in red pepper powder.