• Journal of the Korean Wood Science and Technology
• /
• v.40 no.3
• /
• pp.204-211
• /
• 2012

In this study, fast pyrolysis of pitch pine (Pinus rigida) was performed in a fluidized bed reactor under the temperature ranges between 400 and $550^{\circ}C$ at the residence time of 1.9 sec. Essential pyrolytic products (bio-oil, biochar, and gas) were produced and their yield was clearly influenced by temperature. The maximum yield of bio-oil was observed to 64.9 wt% (wet basis) at the temperature of $500^{\circ}C$. As pyrolysis temperature increased, the yield of biochar decreased from 36.8 to 11.1 wt%, while gas amount continuously increased from 16.1 to 33.0 wt%. Water content as well as heating value of bio-oils were obviously sensitive to the pyrolysis temperature. The water contents in the bio-oil clearly decreased from 26.1 ($400^{\circ}C$) to 11.9 wt% ($550^{\circ}C$), with increasing the fast pyrolysis temperature, while their higher heating values were increased from 16.6 MJ/kg to 19.3 MJ/kg. According to GC/MS analysis, 22 degradation compounds were identified from the bio-oils and 10 compounds were derived from carbohydrate, 12 compounds were derived from lignin.

• Journal of Bio-Environment Control
• /
• v.20 no.1
• /
• pp.40-44
• /
• 2011

This study was conducted to develop method of producing okra in the plastic house and the 11 cultivar of okra were planted in plastic house for selecting proper cultivar in Korea. As result of observing growth, commercial cultivar germinated better than wild collected. The germination rate in 'No 1', 'No 4' and 'No 5' were better than in 'No 2' and 'No 3'. The plant height of 'No. 4', which is one of wild collected, showed biggest plant height moreover 'Greensode'. The numbers of node, which could indicate to set fruit, showed 4.2~6.5 per plant in most cultivar and 'No 2' and 'No 5' could yield more than others. 'Greensode' was planted in plastic house for finding out suitable planting method. The seeds were soaked could germinate 100% and those were taken 8 days for germinating but control seeds needed 15 days to germinate. The yield of 'Greensode' which was planted in $45{\times}75cm$ with planted 3 and 4 per hill could best produce in plastic house.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.141.1-141.1
• /
• 2014

오일 증기의 제트를 분사하여 잔류가스를 배기하는 오일확산펌프는, 구조가 간단하여 고장이 적고 저렴하며 소음 및 전기노이즈가 적게 발생하는 많은 장점을 가지고 있다. 그러나 오일의 증기압에 의해 그 도달압력이 10-9 Torr 이상으로 제한되어, 액체질소로 냉각되는 배플형태의 저온 트랩을 사용하지 않는 한 10-10 Torr영역의 초고진공 배기용으로는 사용하지 못하는 것으로 알려져 있다. 유회전펌프로 뒷받침 배기(foreline pumping)하는 700l/s의 배기속도를 가진 오일확산펌프에 300 liter/sec의 컨덕턴스를 가진 액체질소 트랩을 부착하여 메탈 실링을 사용하는 초고진공 챔버를 배기하였다. 액체질소트랩에 액체질소를 투입하면 $1{\times}10-8Pa$이하의 초고진공이 얻어졌으나, 액체질소가 증발하여 트랩의 온도가 상온으로 상승하면 압력도 $1{\times}10-7Pa$ 이상으로 상승하였다. 50 liter/sec의 배기속도를 가진 터보분자펌프로 오일확산펌프를 뒷받침 배기하면 액체질소를 투입하지 않은 상태에서 $5{\times}10-9Pa$이하의 초고진공이 얻어졌으며, 액체질소를 투입하여도 압력은 거의 변화하지 않았다. 잔류가스분석장치로 얻은 잔류가스 성분 스펙트럼은 수소가 잔류가스의 대부분을 차지하는 것을 보여주었다.

• Clean Technology
• /
• v.6 no.1
• /
• pp.51-60
• /
• 2000

The soil remediation by non-ionic surfactant solutions ($C_{12}H_{25}O(CH_2CH_2O)_5H$ and Triton X-100) was studied. Depending on the amounts and use of co-surfactants, MPT(phase inversion temperature), dynamic interfacial tension, and the detergency efficiency of the surfactant solutions in soil were investigated. The oils used were kerosene, n-hexadecane, and paraffin oil. With respect to a higher detergency efficiency, a lower interfacial tension and the MPT was very important. The $C_{12}H_{25}O(CH_2CH_2O)_5H$ was better than Triton X-100 on the oil removal from the soil and the effect of oil kinds was kerosene>paraffin $oil{\geq}n-hexadecane$. The co-surfactant, n-dodecanol, reduced the MPT compared to no addition of this, whereas it did not enhance the detergent efficiency.

• Korean Chemical Engineering Research
• /
• v.49 no.6
• /
• pp.823-828
• /
• 2011

Characteristics of water separation in a FWKO(Free Water Knok Out) vessel was investigated to remove water from oil-water mixture. Decane, toluene, and asphalt were used as model oils. Preliminary experiments were carried out for decane in a prototype FWKO vessel. Based on the results of preliminary experiments, the prototype vessel was modified and its performance was evaluated by using toluene. The effects of experimental variables on the separation of oil-water mixture were evaluated in terms of separation efficiency. The experimental variables include water cut(water ratio), number of baffles, residence times, and operation temperatures. The optimum conditions of water separation were found to be 0.8 water cut, 3 baffles, 1,200 sec, and $45^{\circ}C$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.1664-1670
• /
• 2015

As journal bearing has a sliding motion between the shaft and bearing with lubricating oil, it produces a hydrodynamic lubrication condition. Journal bearing can receive a large force because it takes a distributed load at the large friction face. As the oil groove or oil hole is made in the journal bearing surface for the journal bearing smoothly working under a hydrodynamic lubrication condition, sufficient lubricating oil is supplied through the clearance of journal bearing. The performance of the journal bearing is changed according to the shapes, sizes and positions of an oil groove. In this paper, the flow rate according to the oil groove shapes (triangle, semicircle and rectangle) among the various oil supply conditions was measured. The shape that discharges the highest flow rate was observed and the groove shape of optimal performance for the journal bearing was determined. The results showed that the flow rate increases with decreasing operating temperature, the influence of temperature on the flow rate decreased with increasing rotational speed, and flow rate in the triangular groove shape was greater than in other shapes.

• Korean Chemical Engineering Research
• /
• v.50 no.1
• /
• pp.6-10
• /
• 2012

The main objective of this work was studying the influence of paraffin oil(PO) on the adhesion properties at low temperature in styrene-butadiene-styrene(SBS) copolymer and crumb rubber(CR) modified asphalt. The temperature susceptibility of SBS/CR asphalt and PO/SBS/CR/asphalt blends were measured by penetration and softening point. Adhesion properties at low temperature and dispersion of modifiers in PO/SBS/CR/asphalt blends were evaluated by universal test machine and florescence microscopy, respectively. The adhesion properties of PO/SBS/CR/asphalt blends at low temperature increased in the proportion of SBS contents with both 5 and 10 wt % of paraffin oil. Results showed that the maximum tensile adhesion strength and toughness energy at $-20^{\circ}C$ were obtained when PO and SBS contents were 10 wt % and 6 wt %, respectively. The addition of PO is effective for enhancing the flexibility of SBS/CR/asphalt blends and leads to the increase of toughness at low temperature.

• Journal of the KSME
• /
• v.33 no.6
• /
• pp.515-522
• /
• 1993

센서는 자연현상을 감지하는 소자로 계측 및 제어시스템의 구성요소로 이용되며, 센서를 이용 하여 Closed-loop System의 구성을 가능케 하며, 지능화된 시스템을 구현 할 수 있다. 센서는 압력, 유량, 온도, 자장, 광 등을 측정하는 물리적 센서, pH, 이온, 산소 등의 구성물을 감지하는 화학센서, 인체의 혈당량, 뇌의 상태, 냄새 등을 측정하는 바이오 센서로 대별될 수 있다. 이중 물리적 센서는 기계적 시스템에 많이 이용되며, 특히 압력, 유량센서는 자동차에 있어서 엔진의 Manifold, 엔진오일, 브레이크 오일, 타이어, 연료 등의 상태를 측정하는데 사용되고 있다. 예를 들어 1980년대에는 미국 Ford와 Motorola사가 공동으로 반도체공정 기술을 이용한 용량 형(capacitive) 압력센서를 개발하여 엔진의 컨트롤시스템에 이용하였다. 이러한 압력센서는 1988년에 15억불의 매출을 기록하였으며, 1955년에는 30억불로 늘어날 전망으로 있어 가장 많이 사용되는 센서로 각광을 받고 있다. 이글에서 압력센서의 원리 및 종류에 대하여 알아보고, 마 이크로머시닝 기술 등의 제작방법과 이의 응용에 대하여 논의하려 한다.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1429_1430
• /
• 2009

본 연구에서는 7인치 샘플패널의 가속 Aging 실험을 통해 Aging time(24hr~529hr)변화에 따른 오방전 발생 Mechanism을 분석하고자 했다. 상온에서 Aging time변화에 따른 정마진, 휘도, Vt close curve를 측정 하였고 시간과 온도(고온: $70^{\circ}C$, 상온: $25^{\circ}C$, 저온: $-20^{\circ}C$)에 따른 Discharge time lag의 변화양상을 측정하였다. 그리고 Sustain pulse수의 조절을 통해 패널의 Priming 조건을 제어하면서 오방전 발생 확률을 수치적으로 측정하였다. 실험을 통해, 패널의 Aging time이 늘어남에 따라서 상판의 MgO층에서 Sputtering현상이 발생하여 MgO 잔재들이 하판의 형광체 표면을 덮는 등 방전 개시 전압의 변화가 오방전 발생에 주요한 원인임을 알 수 있었다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.4
• /
• pp.697-702
• /
• 2007

The lubricational characteristics about friction and wear has an important effect on the material quality of surface. Therefore, in the case of automobile engine oil which is used under severe running condition, or therefore, the seizure and anti-scuffing is very important. We have studied the lubricational characteristics of auto engine oil with additives using Falex wear test machine. We have obtained the studied result is as fellows. In order to more improved the surface roughness characteristics adding the P(phosphate) as additives is excellent at a low temperature. Adding the ZnDTP and Ca-phenate is excellent on the anti-wear and extreme pressure properties at the high load. Moreover, when the ZnDTP and P are added, the temperature properties is excellent because the stability is maintained in a high temperature.