• Title/Summary/Keyword: 오일 냉각기

Search Result 50, Processing Time 0.037 seconds

영광 3&4호기 부분충수운전시 정지냉각계통 최소유량 감소에 대한 영향분석

  • 오광석;오종필;김도현;이중섭;유병철
    • Proceedings of the Korean Nuclear Society Conference
    • /
    • 1996.05b
    • /
    • pp.385-390
    • /
    • 1996
  • 영광 3&4호기의 부분충수운전시 정지냉각계통 최소유량의 감소에 따른 영향을 노심의 잔열제거 능력 및 저압안전주입펌프의 성능 측면에서 분석하였다. 정지냉각계통 성능해석용 전산코드인 KDESCENT를 수정하여 사용하였으며 보수적인 초기조건 및 가정을 사용하였다. 분석결과 부분충수 운전동안 원자로냉각재의 최고 허용온도를 작업자의 접근을 위한 설계온도인 140 ℉로 설정할 경우 원자로 정지후 4일 시점에서 이를 만족할 수 있는 정지냉각계통의 최소유량은 실제값으로 3000 gpm(계측기의 오차포함 3440 gpm)임을 알 수가 있었다. 이 유량은 붕산희석이나 성층화, 저압안전 주입펌프의 성능 측면에서도 허용가능한 값이다.

  • PDF

강재의 압연유

  • 김재중
    • Journal of the KSME
    • /
    • v.31 no.4
    • /
    • pp.389-400
    • /
    • 1991
  • 압정가공은 열간압정과 냉간압정으로 크게 나눌 수 있으며, 압정기와 피압정재의 종류에 따라 서도 분류한다. 열간압정에서는 알루미늄과 알루미늄합금을 제외하고는 종래에 오직 물만이 냉각겸 윤활제로 사용되어 왔다. 그러나 근년에 와서 열간압정에서도 윤활유를 사용하게 됨으 로서 롤(roll)의 수명연장, 전력소비량의 저감 및 사상(finishing) 강판의 표면품질향상등에 극히 유효하다는 것을 인식하게 되었다. 한편 냉각압정에서는 압정유를 사용해 온 것이 100년 가까이 되는 역사가 있고, 특히 과거 십 수년간에는 상당히 광범위하게 연구가 이루어져서, 많은 실적을 갖게 되었다. 예컨대, 석도원판으로 대표되는 박판압정에 있어서는 고속고압하에서 판의 형상 및 표면정쟁성 향상은 물론이고 저온(에너지 절감, 작업성 개선) 저농도사용(원단위감소)이 이루어 지고, 나아가 장수명(액의 오염이 적은 것)의 압정유가 개발되었다. 또한 마대강 압정에 있어 서는 고윤활이면서도 ECL(electric cleaning line)의 성략도 가능한 압정유 즉 밀크린시트(mill clean sheet) 압정유의 연구도 활발히 진행되고 있다. 압정유의 역할을 살펴보면 열간 또는 냉 간을 불문하고, 롤과 재료간의 감마작용이 주가 되지만 기타 실용적으로는 (1)냉각성 (2)판의 끝맺음(finishing)성 (3)선정선 (4)방장성,비부식성 (5) 내노화성 (6) 오일.스테인(oil stain) (7) 급 유성 (8)액관리성 (9)비수처리성 10) 안전위생 (11)경제성 등을 열거할 수 있다.

  • PDF

Mathematical Models of a Transformer Cooling System for the Control Algorithm Development (제어알고리즘 개발을 위한 변압기 냉각시스템의 수학적모델)

  • Han, Do-Young;Noh, Hee-Jeon
    • Korean Journal of Air-Conditioning and Refrigeration Engineering
    • /
    • v.22 no.2
    • /
    • pp.70-77
    • /
    • 2010
  • In order to improve the efficiency of a main transformer in a train, the optimal operation of a cooling system is necessary. For the development of optimal control algorithms of a cooling system, mathematical models of a main transformer cooling system were developed. These include static and dynamic models of a main transformer, an oil pump, an oil cooler, and a blower. Static models were used to find optimal oil temperatures of the inlet and the outlet of a transformer. Dynamic models were used to predict transient performances of control algorithms of a blower and an oil pump. Simulation results showed good predictions of the static and the dynamic behavior of a main transformer cooling system. Therefore, mathematical models developed in this study may be effectively used for the development of control algorithms of a main transformer cooling system.

Development of a purifying system to separate minute solid particles and water in oil (오일 속 미세입자 및 수분분리를 위한 청정기 시스템 개발)

  • Kim, Yong-Keun;Choi, Yoon-Hwan;Moon, Myung-Jun;Lee, Yeon-Won
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.41 no.1
    • /
    • pp.44-49
    • /
    • 2017
  • In this research, a purifying system using a centrifugal filter equipped with a water separation component has been studied. Oil utilized for lubrication and cooling in marine engines becomes unable to achieve its original purpose over time as the accumulation of solid particles and water increases. Therefore, methods applying the Bernoulli equation to eliminate water in oil were investigated and proposed. As a result, a practical purifying system was designed and tested by an officially certified organization. The new purifying system is anticipated to contribute to the extension of the lifetime of oil in addition to damage reduction methods of mechanical parts.

Numerical Analysis on the Heat Transfer Characteristics of Syngas Cooling System of an IGCC Process (IGCC 합성가스 냉각 시스템의 열전달 특성 연구)

  • Oh, Junho;Ye, In-soo;Park, Sangbin;Ryu, Changkook;Park, Sungku
    • 한국연소학회:학술대회논문집
    • /
    • 2013.06a
    • /
    • pp.65-68
    • /
    • 2013
  • In a syngas cooling system of coal gasification process, fly slag carried by syngas deposit on the surface of heat exchanger. The deposited materials form a fouling layer with several millimeters thickness, disturbing heat transfer between steam and syngas. This study investigates flow and heat transfer characteristics of syngas in helical coil heat exchanger using computational fluid dynamics under clean and fouled surface condition. Process model were also designed and its results are in good agreement with CFD results.

  • PDF

The quality improvement study on the crack of heat exchanger lubricating oil port in military aircraft (군용항공기 열교환기 윤활유 유입포트 균열개선 연구)

  • Park, Sung-Jae;Choi, Jae-Ho;Choi, Gil-Gyu;Lee, Dong-Ki
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.21 no.4
    • /
    • pp.164-172
    • /
    • 2020
  • The fuel oil/heat exchanger installed in military aircraft is a device that cools the lubricant oil supplied to other devices, such as an AMAD, and a hydraulic pump using the low temperature of the fuel is cracked at the AMAD lubricant inlet port. If a crack in the heat exchanger occurs, the lubricant oil supplied to other equipment is not cooled. Therefore, the flight can no longer be performed. In this study, non-destructive inspection and microscopic examination of the fracture surface of the oil port were performed to analyze the crack tendency. The oil pipe connected to the oil port is a titanium pipe, which is fastened with over torque and has been identified as the leading cause of heat exchanger oil port cracks. In addition, it was verified as the main reason for cracking by finite element analysis. The material and diameter of the pipe were changed to improve this defect, and the applied torque was adjusted. In addition, the bending value of the pipe was adjusted to minimize the fatigue accumulation due to pulsating pressure. As a result, no cracks occurred on the heat exchanger via the ground test after the installation of an improved pipe under the same conditions.

Effect of the Recycling of Non-condensable Gases on the Process of Fast Pyrolysis for Palm Wastes (미응축가스 재순환에 따른 팜 부산물 급속열분해 반응 공정 특성)

  • Oh, Changho;Lee, Jang Hoon
    • Clean Technology
    • /
    • v.24 no.3
    • /
    • pp.233-238
    • /
    • 2018
  • Bio-oil is produced by the fast quenching of hot vapor produced by fast pyrolysis of biomass in an inert atmosphere. Nitrogen is used as carrier gas to control the concentration of oxygen less than 3%. The consumption of nitrogen should be increased with increasing process size, and leading to increasing of facility and operating costs due to nitrogen charge. The effects of the recycling of non-condensable gases on the fast pyrolysis, bio-oil yield and quality, and nitrogen consumption have systematically investigated to see the possibility of these results in fast pyrolysis process of palm residue.

기기냉각수 최저온도와 정지냉각계통 유량조절밸브 개도에 관한 설계분석

  • 김도현;이중섭;오종필;오광석
    • Proceedings of the Korean Nuclear Society Conference
    • /
    • 1995.10a
    • /
    • pp.444-449
    • /
    • 1995
  • 한국형 표준 원자력발전소의 정지냉각운전시 최대냉각율은 75$^{\circ}$F/hr(41.7$^{\circ}C$/hr)로 기술사양서에 규정되어 있다. 정지냉각운전 냉각율에 가장 큰 영향을 미치는 2가지 중요한 변수는 정지냉각계통 열교환기를 지나는 원자로냉각재 유량과 기기냉각수의 온도다. 이중 열교환기를 지나는 원자로냉각재 유량은 butterfly형 정지냉각계통 유량조절밸브의 개도에 의하여 조절되는데 개도에 따른 throttle 능력이 중요한 인자다. 또 기기냉각수의 온도는 해수온도의 변화에 따라 편차가 발생하므로 유량조절밸브의 개도와 기기냉각수 온도의 상관관계에 따라 냉각능력이 달라진다. 본 논문에서는 현 울진 3&4호기 정지냉각계통 열 교환기 및 조절밸브 둥의 설비를 기준으로 기술사양서 상의 냉각율 75$^{\circ}$F/hr(41.7$^{\circ}C$/hr) 유지가 가능한 최저 기기냉각수의 온도를 찾아보았고, 아울러 기기냉각수의 온도와 조절밸브의 개도 사이의 관계를 조사하였다. 그 결과 현재의 울진 3&4호기 조절밸브를 최저개도로 조절할 때 약 57$^{\circ}$F(13.9$^{\circ}C$)의 기기냉각수가 공급되어도 냉각율 제한치를 넘지 않는 것으로 분석되었다. 한편, 최저조절가능 유량이 약 2000 gpm(7570 l/min)일 경우에는 낮은 기기냉각수가 공급될 경우 최대냉각율을 초과하므로 한 train을 정지시키고 한 train만으로 운전할 것을 고려하여야 할 것으로 보인다. 이 경우 최저 약 56.5$^{\circ}$F(13.6$^{\circ}C$)의 기기냉각수가 공급되어야 한다. 본 논문의 분석결과는 향후 기기설계사양서나 운전지침서 등에 반영되어 실제 발전소 설계 및 운전절차 수립에 기여할 수 있을 것으로 생각된다.공감대의 형성이 요구된다. 질적 측면에서는 공원 녹지의 기능성의 회복이라는 측면과 시대에 부합되는 새로운 기능 및 가치의 부여가 필요하며, 이를 위해서는 공원의 매력, 공원의 시설기능 증진, 녹지의 질의 향상 및 녹지 가치의 증진에 대한 다양한 시책이 요구된다. 구성적 측면에서는 공원녹지의 개별적 존재보다는 공원 녹지를 상호간 유기적인 계통을 확보하여 공원 녹지의 네트워크를 형성하여 도시 속의 산재된 고립된 섬으로서의 공원 녹지가 아닌 시민생활에 늘 가까이 있는 생활 속의 공원녹지로 재편되어야 한다. 이러한 정책의 의제는 양적 측면에서 보전(CONSERVATION)과 창출(CREATION), 질적 측면에서 쇄신(RENOVATION)과 복구(RESTORATION), 그리고 구성적 측면에서 공원 녹지의 연결(CONNECTION)과 시민 참여에 의한 운동(MOVEMENT)이라는 정책 개념의 구현을 통해 가능하다. 이러한 정책 개념과 의제를 가지고 서울시 공원 녹지 정책을 구체화시키기 위해서 푸르름의 새로운 탄생이라는 기치 아래 풍요로운 서울, 사랑 받는 공원, 생활 속의 녹지의 3대 목표, 공원 녹지의 보전, 잠재 공원 녹지의 창출, 공원의 활성화, 녹지의 복구, 경관 보전 및 복구, 공원 녹지의 네트워크, 도시 녹화의 7대 과제를 설정하고 미시설 공원 녹지 집행, 개발 사업시 공원 녹지의 확보, 환경 녹지의 총량 보호 관리, 도시 소공원 개발, 역사 문화 공원 조성, 하천 공간 복원, 공원 시설 기능 개선, 이용 프로그램 개발, 공원 관리 개선, 환경 피해 녹지의 회복, 도시 환경 림 조성, 녹지 기능 증진, 도시 자연 경관 보전, 공원 녹지체계 구성, 공원 녹지 공급 균형, 주변 환경 녹화, 가로 녹화의 17개 시책을 제안하였다. 이러한 정책사업의 원활한 추진을 위해서는 기존의 관주도의 일방적인 공원 녹지 행정이 아닌 시민의 참여를 통한 시민이 함께 하는 정 책 사업의 추진이 요구되며, 특히 민간 부문의

  • PDF

Optimal design of a micro evaporator to maximize heat transfer coefficient (열전달 계수 최대화를 위한 마이크로 증발기의 최적 설계)

  • Sung, Tai-Jong;Oh, Dae-Sik;Seo, Tae-Won;Kim, Jong-Won
    • Proceedings of the KSME Conference
    • /
    • 2007.05b
    • /
    • pp.2097-2101
    • /
    • 2007
  • This paper presents an optimal design of a micro evaporator which maximizes the heat transfer coefficient. Number of gaps, spanwise distance and streamwise distance are selected as the geometric design parameters. Mass flow rate of the refrigerant is selected as the non-geometric design parameter. Temperature at the surface of the heater is measured to valuate the heat transfer coefficient. Nine experiments are conducted using $L_9(3^4)$ orthogonal array. Maximum heat transfer coefficient is 640 W/$m^2K$ at the parameters of 2 gaps, 0.2 mm spanwise distance, 1.0 mm streamwise distance and 0.72 g/s mass flow rate. Among the 3 geometric parameters, the spanwise distance is the most sensitive parameter influencing the heat transfer coefficient. We conduct a second stage of experiment to increase the heat transfer coefficient by reselecting the mass flow rate. We concluded that 0.87 g/s is the optimized flow rate for an active micro cooler resulting in a heat transfer coefficient of 651 W/$m^2K$.

  • PDF