• 제목/요약/키워드: 오일분리기

검색결과 26건 처리시간 0.027초

오일분리기의 성능분석 (Performance Analysis of a Oil Separator)

  • 김창수;박성영
    • 한국산학기술학회:학술대회논문집
    • /
    • 한국산학기술학회 2011년도 추계학술논문집 2부
    • /
    • pp.593-595
    • /
    • 2011
  • 본 논문은 전산해석을 통하여 일반적으로 가솔린엔진에 적용되는 오일분리기의 성능을 분석하였다. 현재 상용화된 제품을 해석한 결과 Labyrinth부분에서는 포집 능력이 거의 없는 것을 확인하였다. 오일입자 포집효율이 전체적으로 분포되지 않고 5개의 작은 홀이 있는 격판 부분에서만 집중적으로 나타나는 것을 확인하였다. 또한, 일반적인 Cyclone형태의 오일분리기보다 압력강하량이 높은 것을 확인할 수 있었다.

  • PDF

전산유동해석을 통한 가솔린 엔진용 오일분리기의 성능분석 (Performance Analysis of Oil Separators for Gasoline Engine Using CFD Simulation)

  • 김창수;박성영
    • 한국산학기술학회논문지
    • /
    • 제13권2호
    • /
    • pp.516-521
    • /
    • 2012
  • 본 논문은 전산해석을 수행하여 가솔린 엔진에 적용되는 오일분리기의 성능을 비교/분석하여 적정한 오일분리기를 선정하고자 하였다. 두 가지 다른 형태의 오일분리기를 해석하였으며, 포집된 오일입자를 분석하여 포집성능을 대표하는 d50과 포집효율을 계산하였다. 계산결과 모델 A는 우수한 포집성능과 효율을 나타내었고, 모델 B는 양호한 압력강하량 특성을 보였다. 크랭크 케이스의 압력이 높지 않고, 오일소모량이 적은 일반적인 가솔린 엔진의 경우에는 압력강하량이 우수한 모델 B 오일분리기를 추천한다. 크랭크 케이스의 압력이 높고, 오일소모량이 큰 엔진, 특히 오일입자의 오염이 치명적인 특수 배기처리장치를 장착한 엔진에는 큰 압력강하량과 우수한 포집효율을 가지는 모델 A 오일분리기를 추천한다.

$CO_2$ 냉동시스템의 오일 분리기에서 PAG오일 분리 특성에 관한 실험적 연구 (An Experimental Study on PAG Oil Separation Characteristics of an Oil Separator for a $CO_2$ Refrigeration system)

  • 조은영;이성광;강병하;김석현
    • 대한설비공학회:학술대회논문집
    • /
    • 대한설비공학회 2008년도 하계학술발표대회 논문집
    • /
    • pp.271-276
    • /
    • 2008
  • The oil trap in oil separator is one of the most important characteristics for normal operation of compressor. In this study, oil separation characteristics has been investigated for $CO_2$/PAG mixture using a gravity type of oil separator. The experimental study has been carried out in the range of oil concentration 0 to 5 weight-percent and the mixture temperature range of $0^{\circ}C$ to $15^{\circ}C$. The results obtained indicate that oil separation ratio in oil separator is increased with an increase in the oil concentration and mixture temperature.

  • PDF

다상유동 분리기 모듈화를 위한 유입구 형상 설계에 관한 수치해석적 연구 (Numerical Study on the Inlet Head Configuration of Multi-Phase Separator for Modularization)

  • 홍창기;김윤제
    • 대한기계학회논문집B
    • /
    • 제41권9호
    • /
    • pp.571-577
    • /
    • 2017
  • 본 연구는 수치해석 기법을 활용하여 오일샌드 플랜트에 사용되는 다상유동분리기의 다양한 유입구 형상에 따른 효율 분석에 관한 연구이다. 본 연구에 사용된 유수분리기(FWKO, Free-water knockout)는 유량 $15,89m^3/d$(100 bbl/d), SOR(Steam-to-Oil Ratio) 3.5의 값을 가지며 Stokes 이론을 기반으로 설계되었다. 모듈화를 위하여 두 개의 유수분리기를 병렬 연결하였고 이에 따른 유입구 형상 최적화를 수행하였다. 유입구를 통해 유입되는 비투멘 에멀젼은 $150^{\circ}C$, 50 bar이며, API는 17의 값을 갖는다. 유수분리공정의 평균체류시간은 물과 오일이 95% 분리되는 시간으로 정의하였다. 다상유동의 밀도차에 의한 중력분리과정을 모사하기 위하여 유한체적법(VOF, Volume Of Fluid)과 상차분모델(DPM, Discrete Phase Model)을 조합하여 활용하였으며 준과도(Pseudo-transient) 해석기법을 활용하였다.

오일 분리기에서 $CO_2$/PAG오일 혼합물의 오일 분리특성에 관한 실험적 연구 (An Experimental Study on Oil Separation Characteristics of $CO_2$/PAG Oil Mixture in the Oil Separator)

  • 김경재;이성광;조은영;강병하;김석현
    • 대한설비공학회:학술대회논문집
    • /
    • 대한설비공학회 2008년도 동계학술발표대회 논문집
    • /
    • pp.131-136
    • /
    • 2008
  • The oil separation in an oil separator is one of the most important characteristics for proper compressor operation. In this study, a gravity type of oil separator is used. Oil separation characteristics has been investigated for $CO_2$/PAG mixture in the range of oil concentration 0 to 5 weight-percent and the mixture temperature range of $5^{\circ}C$ to $15^{\circ}C$ and $70^{\circ}C$ to $90^{\circ}C$. The results obtained indicate that the oil separation is increased with an increase in the oil concentration. It is also found that the oil separation in liquid state is increased with an increase in the mixture temperature while the oil separation in gas state is decreased.

  • PDF

가열기가 내장된 냉매오일 분리기의 성능 고찰 (Performance Analysis of the Refrigerant oil separator with a build-in heater)

  • 김종열
    • 동력기계공학회지
    • /
    • 제15권6호
    • /
    • pp.41-46
    • /
    • 2011
  • Refrigerant oil reduces friction between piston and cylinder of compressor and is normally hard to mix or dissolve in refrigerant. Oil separator deprives refrigerating oil from mixed solution of refrigerant and refrigerant oil. Sometimes much machine oil is carried into an evaporator and is applied to surface of the evaporator, and then disturbs heat transfer through it. Well-made oil separator helps refrigerating system stable and evaporator sustain full capacity. In this paper, new oil separate with different way to structure is suggested and tested. As result the new separates is 13% higher at 0C with 10% mixture and 6% higher at 0C with 20% mixture.

오일 속 미세입자 및 수분분리를 위한 청정기 시스템 개발 (Development of a purifying system to separate minute solid particles and water in oil)

  • 김용근;최윤환;문명준;이연원
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제41권1호
    • /
    • pp.44-49
    • /
    • 2017
  • 본 연구에서는 선박 엔진 오일을 여과하는 검증된 기술인 원심정화기(Centrifugal Filter)를 이용하여 수분배출 구조를 설계하고 적용함으로써, 원심 청정기 시스템(Centrifugal Purifier System)을 개발하고자 한다. 선박엔진에서 윤활 및 냉각을 담당하는 오일은 시간이 경과할수록 미세입자 슬러지가 증가하고 때로는 수분의 유입에 따라 원래의 기능을 담당할 수 없게 되어 엔진내부에 치명적인 기계적 손상을 초래한다. 따라서 수분 제거 원리 고안 및 검증, 적절한 배출 구조 설계를 연구하였으며, 개발된 제품은 공인시험을 통해 유효함을 검증하였다. 이는 실제 선박에서 절실히 필요한 엔진 오일의 수명 연장 및 폐오일 감소, 기계 부품 손상 저감 등에 기여할 것으로 기대한다.

T-GDI 엔진의 속도 및 하중이 블로우바이 가스의 오일입자 크기와 오일분리기 성능에 미치는 영향에 대한 실험 및 수치적 연구 (Experimental and Numerical Investigation of the Effect of Load and Speed of T-GDI Engine on the Particle Size of Blow-by Gas and Performance of Oil Mist Separator)

  • 정수진;오광호
    • 한국분무공학회지
    • /
    • 제25권4호
    • /
    • pp.162-169
    • /
    • 2020
  • The worldwide focus on reducing the emissions, fuel and lubricant consumption in T-GDI engines is leading engineers to consider the crankcase ventilation and oil mist separation system as an important means of control. In today's passenger cars, the oil mist separation systems mainly use the inertia effect (e.g. labyrinth, cyclone etc.). Therefore, this study has investigated high efficiency cylinder head-integrated oil-mist separator by using a compact multi-impactor type oil mist separator system to ensure adequate oil mist separation performance. For this purpose, engine dynamometer testing with oil particle efficiency measurement equipment and 3D two-phase flow simulation have been performed for various engine operating conditions. Tests with an actual engine on a dynamometer showed oil aerosol particle size distributions varied depending on operating conditions. For instance, high rpm and load increases bot only blow-by gases but the amount of small size oil droplets. Submicron-sized particles (less than 0.5 ㎛) were also observed. It is also found that the impactor type separator is able to separate nearly no droplets of diameter lower than 3 ㎛. CFD results showed that the complex aerodynamics processes that lead to strong impingement and break-up can strip out large droplets and generate more small size droplets.

문서영상의 낱자 단위 언어 구분 (Language Identification of Character-level in Document Image)

  • 권세광;오일석
    • 한국정보과학회:학술대회논문집
    • /
    • 한국정보과학회 2003년도 가을 학술발표논문집 Vol.30 No.2 (2)
    • /
    • pp.613-615
    • /
    • 2003
  • 본 논문은 문서 구조분석을 통해 얻어진 텍스트 영상에 대해 낱자 단위 분할 과정과 분할된 낱자에 대한 언어 구분 방법을 제안한다. 먼저 8방향 연결 요소를 이용한 레이블링을 수행하고 각 레이블의 거리관계와 한글 종모음의 특징을 이용하여 낱자 분리를 수행한다. 분리가 이루어진 낱자의 언어 구분은 각 낱자에 존재하는 concavity 특징을 이용하여 한글과 영어로 구분하게 된다. Concavity 특징을 찾기 위해 낱자를 이루는 흑화소 중 수직런을 이루는 흑화소 중 일부와 세리프 성분을 제거하며 그 방법을 기술한다. concavity 특징은 분리기를 통해 한글과 영어 두 가지로 분리되며, 분류기는 신경망을 이용한다. 제안된 방법은 20개의 텍스트 영상에 총 7923개의 낱자를 대상으로 실험하였으며, 낱자 분리는 97.20%의 정확도를 보였으며 분리된 낱자에 대한 언어 구분은 92.70%의 정확도를 얻을 수 있었다.

  • PDF