• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.08a
• /
• pp.432-437
• /
• 1998

NLMS 알고리즘을 채용한 음향반향제거기는 주변잡음에 대해서 적응필터의 계수가 오조정되어 반향제거기의 성능이 저하된다. 본 논문에서 음향반향제거기의 마이크 입력신호와 추정 오차신호의 상관도를 이용해서 주변 잡음신호에 의한 계수 오조정이 작은 적응 알고리즘과 잔여반향을 제거하기 위한 후처리기로 구성된 음향 반향 제거기를 제안한다. 기존의 NLMS 알고리즘이 입력신호의전력으로 적응상수를 정규화하지만 제안하는 알고리즘은 마이크 입력신호와 추정 오차신호의상관도와 입력신호 전력의 합으로 정규화한다. 적응필터가 반향 경로를 추정한 경우, 추정 오차신호에는 근단화자 신호가 대부분을 차지한다. 따라서 근단화자 신호가 있는 경우에는 상관도 값이 커져서 적응 상수가 작아지고 근단화자 신호에 의한 계수의 오조정을 줄일 수 있다. 후처리기도 마이크 입력신호와 추정 오차신호의 상관도를 마이크 입력신호의 전력으로 정규화한 값으로 추정 오차신호를 감쇠시킴으로써 근단화자 신호는 감쇠를 적게 하고 잔여반향을 감쇠시킨다. 멀티미디어 PC를 이용한 실험을 통해서 제안하는 알고리즘이 기존의 알고리즘에 비해서 우수한 성능을 보임을 확인했다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.245-246
• /
• 2009

• Journal of KSNVE
• /
• v.6 no.1
• /
• pp.107-114
• /
• 1996

The damping characteristics of a cylindrical structure containing oil and bearing balls is investigated for external bending forces. The experimental data obtained through the use of bearing balls with viscous oil in a column is given and analyzed. The viscous action of the oil and inertia effects of the balls on the inside of column create a drag force. The drag force dampens the vibration of the column. This study aims to search for an optimum combination of oil and balls which would produce maximum damping. Machining oils of various viscosities along with ball bearings of various sizes place inside cantilevered aluminium tubes of various diameters to create a rig on which the damping properties of the oil and balls can be studied. The contileved tubes are studied in both horizontal and vertical positions in order to gauge the effect of gravity on the system. The actions of the ball in the column and damping characteristics are investigated according to the dimensionless terms. The Buckingham theorem is used to reduce the variables and to predict the damping of an oil ball column. Though the damping ratio remains fairly constant in the horizontal position of column, the damping ratio begins to increase as the ratio of the number of balls and column length rise above 0.28 in the vertical position of oil ball column. The ratio of the ball diameter to column diameter influences the damping ratio with an optimum diameter ratio. Slenderness ratio and gravity effects on the damping ratio ane investigated.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.11 no.3 s.55
• /
• pp.53-62
• /
• 2007

This paper presents a new vibration control method for long-span bridges using complex damper system. The new system presents simple mechanical configuration with oil and elasto-plastic dampers which have velocity and displacement dependency in vibration energy absorbing. This system can produce various damping forces according to the applied external forces by the velocity and displacement-dependent characteristics of the dampers. The oil damper dissipates vibration energy for relatively frequent and small amplitude like in the case for small to moderate earthquakes, whereas the elasto-plastic damper system works for rare and large amplitude vibration such as high seismic excitation. Thus, the proposed system exhibits the advantage of low cost with high performance since the roles of the two different dampers are effectively separated. A numerical model is established for the complex damper system, and the response characteristics and effectiveness of the proposed system are presented through numerical simulations. Numerical results show that the proposed complex damper system can significantly improve the seismic performance of long-span bridge structures with much more effective damping mechanism than single conventional passive damper systems.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.10
• /
• pp.69-76
• /
• 2000

Lots of semi-active control devices have been developed in recent years because they have the best features of passive and active system. Especially, controllable magneto-rheological(MR) fluid devices have received significant attention in these area of research. The MR fluid is the material that reversibly changes from a free-flowing, linear viscous fluid to a semisolid with a controllable yield strength in milliseconds when exposed to a magnetic field. If the magnetic field is induced by moving a permanent magnet instead of applying current to a solenoid, it is possible to design a MR damper consuming low power because the power consumption is reduced at steady state. This paper proposes valve mode MR damper using permanent magnetic circuit that has wide range of operation with low power consumption, a design parameter is adopted. The magnetic circuit, material of choke and choke type are selected experimentally with the design parameter. The behaviors of the damper are examined and torque tracking control using PID feedback controller is performed for step, ramp and sinusoidal trajectiories.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.433-439
• /
• 2000

Lots of semi-active control devices have been developed in recent years because they have the best features of passive and active system. Especially, controllable magneto-rheological(MR) fluid devices have received significant attention in these area of research. The MR fluid is the material that reversibly changes from a free-flowing, linear viscous fluid to a semisolid with a controllable yield strength in milliseconds when exposed to a magnetic field. If the magnetic field is induced by moving a permanent magnet instead of applying current to a solenoid, it is possible to design a MR damper consuming low power because the power consumption is reduced at steady state. This paper proposes valve mode MR damper using permanent magnetic circuit that has wide range of operation with low power consumption and small size. To design a MR damper that has a large maximum dissipating torque and a low damping coefficient, a design parameter is adopted. The magnetic circuit, material of choke and choke type are selected experimentally with the design parameter. The behaviors of the damper are examined and torque tracking control using PID feedback controller is performed for step, ramp and sinusoidal trajectories.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1992.10a
• /
• pp.8-13
• /
• 1992

최근 우리 나라도 자동차의 수요가 급격히 늘어나고 있고, 생산량도 급증하 고 있어 자동차 공업이 산업의 최고의 위치를 확보하게 되었다. 자동차는 최 신 종합 기계 구조물로서 전기, 전자, 제어에 이르기까지 거의 모든 분양의 학문적 이론과 기술을 도입하는 최첨단의 기계 장비인것이다. 따라서 그 부 가가치 또한 매우 큰 것이다. 자동차의 성능을 결정짓는 가장 커다란 요소는 주행 성능과 안정성 및 조종성이다. 주행성능이라 함은 자동차의 종방향 운 동에 관한 성능으로서 기관의 동력에 지배적인 영향을 받는 성능(동력 성능) 과 그 밖의 성능(타향 성능, 제동 성능)으로 구분된다. 또 안정성과 조종성이 라함은 자동차의 횡방향 운동에 관한 성능으로서 로울링과 요우잉을 포함시 킨 곡선 운동에 관한 성능을 일컫는다. 이러한 운동 성능을 좌우하는 것은 구조적인 설계의 양부와 스프링이나 댐퍼의 성능일 것이다. 자동차의 수많은 부품 중의 다수가 국산화 되어 있지 아니하고, 또한 이러한 부품들의 성능을 시험할 수 있는 장비의 수입 의존도가 높은 것은 업계나 학계 등에서 앞으 로 많은 연구가 이루어져야 할 점이다. 자동차의 충격 흡수기(shock absorber)의 검사기도 또한 수입 시험기에 의존하고 있었던 것이 현실이었 다. 이에 본 연구진은 이 검사기의 국산화에 착수 한 것이다. 자동차에 있어 서 충격 흡수기는 지면에서 오는 충격을 급속히 흡수하는 역할을 하여 자동 차의 주행 성능과 안정성을 높혀 주며, 승차감을 높혀 주는 중요한 부품이 다. 따라서 충격 흡수기의 양부의 판정은 대단히 중요한 것이다. 본 연구에 서는 충격 흡수기의 충격 흡수력(감쇠력)을 측정하여 감쇠 특성을 정도 높게 파악할 수 있는 시험기를 만드는데 그 목적을 두고 있다. 연구는 시험기의 구동부를 제작하는 기계부와, 제어 및 계측의 하드웨어를 담당하는 전기.전 자부및 실제로 기계를 구동, 제어하고 측정 결과를 기록하고 출력하는 부분 을 담당하는 소프트웨어 개발부로 나누어서 진행하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.5
• /
• pp.35-43
• /
• 1999

In this paper, a new robust adaptive algorithm and a post-processing method are proposed to improve the performance of AEC without computational burden. Its step-size is normalized by the sum of the powers of the reference input signal and the desired signal. When the near-end speaker's speech and noise are applied into the microphone, the step-size becomes small and the misalignment of coefficients are reduced. To reduce the residual echoes, a new post-processing method, which is co-operated with the proposed noise-robust adaptive algorithm, is proposed in this paper. The method is based on the correlation of the desired signal and the estimation error signal. The residual echoes are attenuated as proportional to the correlation normalized with the power of desired signals. The normalized correlation plays a role as Wiener filter for residual echoes. In the double-talk situation, the estimation error signals, that are residual echoes, dominantly include the near-end speaker's speech and the normalized correlation closes to 1. Therefore, the near-end speaker's speech can be transmitted without being attenuated. When the desired signals consists of only the acoustic echoes, the residual echoes are mostly attenuated and canceled by the proposed post-processor. The computation of AEC using the proposed post-processor is comparable to NLMS algorithm.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.244-244
• /
• 2000

We proposed the above-knee prosthesis using rotary MR damper in which knee joint is semi-actively controlled by microprocessor. Dissipation torque in the knee joint can be controlled by the magnetic field which is induced by applying current to a solenoid, Tracking control of knee joint angle was tested by 3-DOF Leg simulator. The experimental results show that the proposed above-knee prosthesis system had good performance in swing phase tracking and repetitive controller in conjunction with a computed control law and PD control law, reduced RMS tracking error as the repetitions of tracking. Moreover, desired knee angle trajectory was generated based on the estimation of gait period with the gyro signal and the tracking control was performed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.12
• /
• pp.2519-2526
• /
• 2002

A disturbance observer-based vehicle stability controller is proposed in this paper. The lumped disturbance to the vehicle yaw rate dynamics caused by the uncertain factors such as uncertain tire forces and parameters is estimated by the disturbance observer, which is utilized by the robust controller to stabilize the lateral dynamics of the vehicle. The dynamics of the hydraulic actuator is incorporated in the vehicle stability controller design using the model reduction technique. Modular control design methodology is adopted to effectively deal with the mismatched uncertainty. Simulation results indicate that the proposed disturbance observer-based vehicle stability controller can achieve the desired reference tracking performance as well as sufficient level of robustness.