• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.11B
• /
• pp.1928-1938
• /
• 2000

기존 데이터베이스 시스템에서 사용되는 회복 기법들은 시스템 파손 시 빠른 회복을 지원하기 위해서 물리적 로깅(physical logging)을 사용한다. 그러나 이런 기법들을 클라이언트/서버 환경에 그대로 적용할 경우에는 여러 가지 문제점이 발생된다. 물리적 기법의 경우에는 로그 분석 시 before-image와 after-image의 중복이 발견된다는 문제점이 있으며, 기존의 대부분 회복 기법들은 시스템 파손 시 전방향(forward)으로 로그를 분석함으로써 불필요한 회복 동작이 존재할 수 있다. 또한 시스템 회복 시 로그 접근 횟수의 증가로 인해 회복 속도가 늦어지는 문제점이 있다. 이 논문에서는 이런 문제점을 해결하고 클라이언트/서버 환경에 적합한 회복 기법을 제안하기 위해 중복된 before-image를 제거하고 재수행 전용 로그 레코드(redo-only log record)만을 로그에 기록함으로써 로깅 오버헤드를 감소시키면서 로그 분석 시간을 감소시킨 역방향 로그 분석 기법을 제안하였다. 또한 로그 분석 시 유지해야 하는 자료구조의 오버헤드를 최소화했다. 마지막으로 제안된 기법과 기존의 기법을 비교 분석하였다.

• Proceedings of the KIEE Conference
• /
• 2006.04b
• /
• pp.149-151
• /
• 2006

This paper shows the characteristic analysis of single-phase LSPM(Line Start Permanent Magnet) synchronous motor considering overhang structure. To obtain the dynamic and steady performance of the motor, the D-Q equivalent circuit is used and the circuit parameters are extracted by 3D FEM. The performance of the model with overhang is compared with conventional model without overhang on the condition that both models have the same volume of the permanent magnet.

• Proceedings of the KIEE Conference
• /
• 2006.04b
• /
• pp.109-111
• /
• 2006

This paper deals with a noise and vibration of brushless dc (BLDC) motors due to the asymmetrical overhang of permanent magnet. The asymmetrical overhang of permanent magnet is generating z-axis thrust which is lead to eccentric force and vibration of BLDC motor. The z-axis thrust considering asymmetrical overhang effect of permanent magnet is analyzed by using 3-D FEM and the result is compared to experimentation.

• Proceedings of the KIEE Conference
• /
• 2007.10c
• /
• pp.80-82
• /
• 2007

This paper presents the overhang effects of a novel axial flux permanent magnet (AFPM) machine, which consist of the segmented stator and fractioned slot windings, with one rotor and double stator. In addition, the overhang effect of permanent magnet of the motor has been analyzed quantitatively. The overhang is used to enhance the force density in permanent magnet machine. According to the variation of overhang length, the flux density distribution and torque are quantitatively compared. For these analysis, three dimensional finite element method (3D FEM) has been used in this paper. From the results, the proper overhang length of PM is selected to improve the performance of the AFPM machine.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.11
• /
• pp.564-571
• /
• 2006

In this paper, the estimation of Z-axis thrust ripple and vibration of BLDC motor with asymmetrical permanent magnet overhang is performed by 3-D Finite Element Method (3-D FEM) and vibration experimentation. The ripple of Z-axis thrust is due to armature reaction field in BLDC motor driven to squire wave. That is generating to Z-axis vibration. The analysis results of Z-axis thrust and the vibration by Z-axis thrust ripple is validated by comparison with experimental result.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.1
• /
• pp.49-56
• /
• 2009

This paper shows the characteristic analysis of single-phase line start permanent magnet (LSPM) motors considering the overhang structure. To achieve the low-cost design of an LSPM motor, the overhang structure is adapted for the rotor with a constraint of a fixed magnet volume. To obtain the dynamic and steady performance of the motor, the circuit parameters are extracted using the 3D-static FEM(Finite Element Method) and the d-q equivalent circuit is used. The performance of the model with overhang is compared with the conventional model without overhang on the condition that both models have a fixed volume for the permanent magnet.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.833-834
• /
• 2015

For the design of a permanent magnet linear synchronous machine with slotless stator structure, this paper addresses a three-dimensional (3D) analytical approach for consideration of end effects. In contrast, analytical method can derive solutions in substantially shorter times with high reliability. Therefore, we derive accurate analytical solutions to dramatically reduce the time need for analysis. In addition, we performed characteristic analysis of permanent magnet linear synchronous machine (PMSLM) according to PM overhang length.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.7
• /
• pp.39-44
• /
• 2012

This paper deals with the characteristic analysis of small power brushless DC (BLDC) motor considering the rotor magnet overhang flux. In the driving characteristics analysis using 2D FEA (Finite Element Analysis), the rotor magnet overhang effect can't be considered and it should be neglected. To consider rotor magnet overhang effect, 3D FEA should be required. But 3D FEA requires very long calculation time even though the high specification computer is used. In this paper, the 3D electromagnetic model of BLDC motor is approximated as the 2D electromagnetic model considering overhang effect. In this paper, the concept of overhang coefficient is applied, and the coefficient according to load torque variance is deduced.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.785-787
• /
• 2004

The purpose of this paper is characteristic analysis of permanent magnet generator for AVR power of brushless synchronous generator. However, the PMG has a spoke type rotor with overhang, so we perform the analysis considering overhang for the precise airgap flux density. In this paper, dynamic analysis model with 2D FEM considering overhang is proposed by use of 2D, 3D static FEM results. The proposed method is verified by the results of PMG load test.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1043-1045
• /
• 2004

This paper deals with the core loss calculation of a BLDC motor made of Soft Magnetic Composite material. Since the teeth of motor partially have overhang in axial direction, 3 - dimensional equivalent magnetic circuit network (3D-EMCN) is used as an analytical method to get flux density of each element. The total core loss is calculated with the magnetic flux density and core loss curves of the SMC material. The calculated result is compared with core loss of the motor without overhang in stator teeth.