• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.12
• /
• pp.1712-1720
• /
• 2017

In South Korea, minimum reserve rate, which is to satisfy reliability standard, has been determined by simulation result using WASP. But, it is still controversial whether the level of minimum reserve rate is adequate. Thus, in this study, various analyses of minimum reserve rate are being conducted. WASP uses the probabilistic simulation technique to evaluate whether reliability standard is satisfied. In this process, forced outage rate and maintenance periods of each generator play important roles. Especially, the long-term plan can be varied depending on how maintenance periods deal with. In order to model maintenance periods in the probabilistic simulation technique, WASP uses derating method. However, broad analyses have to be conducted because there are various ways including derating method to model maintenance periods which result in different results. Therefore, in this paper, 3 different maintenance outage rate modeling methods are applied to arbitrarily modeled system based on the basic plan for long-term electricity supply and demand of South Korea. Results show impact of each modeling method on minimum reserve rate.

• Journal of the Korean Wood Science and Technology
• /
• v.18 no.4
• /
• pp.3-8
• /
• 1990

근년에 전세계에서 목재건조 기술의 주요 관심사는 첫째 건조응력발생과 건조결함 예방이고, 다음은 건조실 제어시스템, 건조스케줄개발, 목재수분이동, 함수율측정, 새로운 건조방법개발, 건조에너지 절약, 경제성분석, 태양열건조, 수학적모델링, 건조전처리, 마이크로웨이브 건조, 건조실 구성과 정비, 건조종기결정, 감압건조, 공정제어와 콘다숀닝, 제습건조, 목재치수 안정 및 고온건조 등의 순위이다. 건조중 발생하는 결함들은 건조경비 증가에 절대적인 영향을 끼칠 수 있다. 예를 들면, 가구공장에 있어서 건조재의 품등 향상에 따른 1%의 수율 증대 효과는 가구 부품 1000 보오드피트당 23$의 생산비를 절감할 수 있고, 활엽수재의 천연건조시 수반되는 건조손상은 생재의 23%를 초과할 수 있다. 본 총설이 각종 문제를 개선하고 건조경비를 절감하는데 기여할 수 있기를 바라며, 또한 단판, 칩 또는 땔감과 같은 비제재품에 관한 건조에 관한것은 제외하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.759-767
• /
• 2021

Most weapons systems that are Force Integration are expensive equipment that reflects the latest technology, and the operation and maintenance cost is increasing continuously. Factors that efficiently operate and maintain these weapon systems include maintenance plans, economic costs, and repair part requirements. Among them, predicting the repair parts requirements during the life cycle in advance is an important way to increase operation and maintenance cost efficiency and operating availability. The start of requirement analysis for repair parts is a calculation of the CSP (CSP: Concurrent Spare parts, CSP hereafter) that is distributed when the weapon system is deployed. The CSP is an essential component of achieving the operating availability during this period because the weapon system aims to successfully perform a given operation mission without resupply for an initial set period. In the present study, the CSP calculation method was analyzed, reflecting the failure rate and operating time of items, but the analyzed CSP was aimed at preparing for technical failure, but in the initial operating environment, it is limited in coping with unexpected failures caused by human error. The failure is not included in the scope of free maintenance and is a serious factor in making the weapon system inoperable during the initial operation period. To prevent the inoperable status of a weapon system, CSP that considers human error is required in the initial operating environment, and the calculation criteria and measures are proposed.

• Journal of Radiation Protection and Research
• /
• v.33 no.4
• /
• pp.151-160
• /
• 2008

In Korean nuclear power plants (NPPs), two thermoluminescent dosimeters (TLD) were provided to workers who work in an inhomogeneous radiation field; one on the chest and the other on the head. In this way, the effective dose for radiation workers at NPPs was determined by the high deep dose between two radiation dose from these TLDs. This represented a conservative method of evaluating the degree of exposure to radiation. In this study, to prevent the overestimation of the effective dose, field application experiments were implemented using two-dosimeter algorithms developed by several international institutes for the selection of an optimal algorithm. The algorithms used by the Canadian Ontario Power Generation (OPG) and American ANSI HPS N13.41, NCRP (55/50), NCRP (70/30), EPRI (NRC), Lakslumanan, and Kim (Texas A&M University) were extensively analyzed as two-dosimeter algorithms. In particular, three additional TLDs were provided to radiation workers who wore them on the head, chest, and back during maintenance periods, and the measured value were analyzed. The results found no significant differences among the calculated effective doses, apart from Lakshmanan's algorithm. Thus, this paper recommends the NCRP(55/50) algorithm as an optimal two-dosimeter algorithm in consideration of the solid technical background of NCRP and the convenience of radiation works. In addition, it was determined that a two-dosimeter is provided to a single task which is expected to produce a dose rate of more than 1 mSv/hr, a difference of dose rates depending on specific parts of the body of more than 30%, and an exposure dose of more than 2 mSv.

• Journal of Preventive Medicine and Public Health
• /
• v.20 no.2 s.22
• /
• pp.331-340
• /
• 1987

To determine the incidence rate of school accidents and its associated factors, a cohort observation was carried out in a boys' high school of a total of 2,324 students for an academic year from March 1986 to February 1987. Data for accidents were collected by the author (school nurse) as students came to the school health station for treatment of accidental injury. Data for school activities were obtained from the diary of academic affairs. A total of 603 students made 1,126 visits to the station for accidental injury during the study period that gave an average 1.9 accidents per student. The average number of visits for accidental injury per day was 5.1 and the incidence rate of accidental injury was 2.2 per 1,000 student days. Each class had about 30 accidents on the average in a year. However there were two classes that had exceptionally high incidence rate of accidents; 54 accidents in one class where 10 athletes were assigned and 58 accidents in the other class where the teacher in charge was On vacation for two months. The highest incidence rate of accident was observed in June (3.4 per 1,000 student days) and the lowest rates were in December and February (1.5 and 0.7 per 1,000 student days, respectively) and there were no appreciable difference by day of week. Accidents were caused by mischief or carelessness of students in 62.2% and by the inappropriate tools and facilities of school in 18.6% . The accidents caused by tools and facilities were mainly due to the antiquated chairs and tables. Referral rate to hospital for severe injury was three times higher in cloudy days and five times higher in rainy days than in clear days. There was almost no accident during the examination period but increased after the examination. Based on these findings, following measures are recommended to prevent school accident: disperse the athletes throughout the classes: should the teacher in charge leave the class for a long period, replace with another teacher who is familiar with the class to keep order; replace or repair the inappropriate tools and facilities; and warn the students for the risk of accident or broadcast music or let the students have light physical exercise to relieve the tension in cloudy or rainy day and after examination.