• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.36 no.4
• /
• pp.251-257
• /
• 2023

This study entailed an investigation of a tensile stress measurement method for prestressed concrete (PSC) tendons by utilizing external magnetization. The target of this study are PS structures that have been constructed and in use. An optimal external magnetization based elasto-magnetic (EM) sensor was designed using finite element analysis considering various factors, such as coil arrangement and size, that could influence the PS tendons inside the PSC girder. The residual tensile stress resulting from the external magnetization of the girder was then determined. Further, theoretical verification was performed using the numerical and material data used in the finite element analysis for sensor design. The calculated values of strength of magnetization at the target location were matched with the finite element analysis results. Thus, the designed sensor and the feasibility of magnetizing the tendons inside the PSC I-girder using an EM sensor were validated.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.3
• /
• pp.50-57
• /
• 1989

The fringe field of magnetic thin-film head is calculated with the Boundary Element Method (BEM), and the effects of a permeable underlayer to the head field are studied. It is found that the BEM can be efficiently used for this complex problem consisting of three different permeable regions, and the permeable underlayer effectively reduces the length of magnetic flux path and increases the fringe field.

• Proceedings of the Korean Magnestics Society Conference
• /
• 1993.11a
• /
• pp.92-93
• /
• 1993

• 한국사회정책
• /
• v.23 no.2
• /
• pp.201-237
• /
• 2016

This paper focuses on Korean and Japanese female workers participating in the outside (secondary) labour market, especially with an attention given to two aspects. First, we explain how females are 'more outsiders' than males in the labour market. Secondly, we investigate M-shape in the female labour market participation by focusing on different proportion of non-standard worker. Then, in order to explain why women keep on being more concentrated in the outer side of the labour market, we examine the development of three policies in Korea and Japan since 1990s. Labour market deregulation policy, female employment policy and lastly, family policy are examined as institutional arrangement. Lastly, we discuss on how institutional combination is associated with females' concentration in the outside labour market in Korean and Japanese dual labour market.

• Electrical & Electronic Materials
• /
• v.4 no.1
• /
• pp.1-11
• /
• 1991

소둔 및 급속응고된 FeA $l_{1-x}$M $n_{x}$ (x=0.05, 0.10, 0.15, 1.20, 0.25, 0.30, 0.35, 0.40) 합금의 자기적 성질을 77.deg.K~750.deg.K의 온도범위에서 비교 분석하였다. 소둔한 시편의 경우, x.leq.0.25일때는 상자성, x=0.30 및 0.35의 경우에는 초상자성, x=0.40은 강자성을 나타내었다. 그리고 급속응고한 시편의 경우에는 전 조성범위에서 초상자성을 나타내었다. 그리고 Mn의 양이 증가함에 따라 자화는 소둔 및 급속응고 시편에서 증가하는 현상을 보였으며 급속응고 시편이 소둔시편에 비해 대개 더 높은 자화를 나타내었다. 본 합금계에 있어 자성에 대한 국부환경 효과를 분석하여 보았다.다.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1459-1460
• /
• 2011

자성유체에 60Hz의 교류자기장을 인가할 때 발생되는 냉각효과를 해석하기 위해 유한요소법을 결합하였다. 열원으로는 전류가 코일에 흐를 때 생성되는 줄열과 닐운동과 브라운운동으로 야기되는 전력손실에 의한 발열이 있다. 교류자기장은 주파수가 낮기 때문에 줄열이 주요한 열원이 된다. 그러므로 코일에서 자성유체로 일어나는 열전달과 자연대류현상은 코일의 표면에서 일어난다. 자연대류현상을 해석하기 위해서는 자성유체의 부력밀도를 고려해야 한다. 부가적으로 자계의 세기와 온도에 관한 함수인 자화와 자기체적력밀도로 인해 자기대류현상과 같은 강제대류가 일어난다. 이러한 두 가지 대류현상으로 인해 교류자기장을 인가한 자성유체에서 냉각효과가 일어난다. 자기체적력밀도는 유한요소법으로 보간된 가상공극개념을 이용하여 켈빈전자기력밀도를 이끌어 낸 후 이를 수치적으로 이용하여 구하였다. 랑제방함수는 켈빈전자기력밀도와 전력손실을 계산하는데 필요한 비선형 자화율을 고려하기 위해 사용하였다.

• Proceedings of the KIEE Conference
• /
• 2004.10a
• /
• pp.86-88
• /
• 2004

This paper deals with the comparison and analysis for open-circuit field of PM(permanent magnet) machines with Halbach and circumferential magnetized rotor. The governing equation is derived in terms of magnetic vector potential and 2-d polar coordinate. And then, analytical results has been verified by comparison with those obtained from FE(finite element) method. On the basis of 2-d analytical results, this paper confirms that PM machines with circumferential magnetized rotor is superior to it with Halbach magnetized rotor in terms of magnitude and sinusoidal wave-forms of flux density due to PM and required magnet volume.

• Journal of the Korean Magnetics Society
• /
• v.24 no.5
• /
• pp.152-159
• /
• 2014

Magnetic gear can transmit torque without any mechanical contact among rotational parts in rotating mechanical systems. Especially, magnetic gear using rare-earth PMs can be used in variety of industry application because of their great power efficiency. Thus, recent trend shows that magnetic gear can be replaced with common mechanical gear. This paper deals with comparison and torque analysis for magnetic gears with parallel and Halbach magnetization according to various design parameters. Using a two dimensional (2D) finite element (FE) analysis, suitable gear ratio is selected. We performed analysis for magnetically connected inner and outer torque with respect to various design parameters including thickness of inner and outer PM, steel pole angle, segments of Halbach array and magnetization pattern of inner and outer PMs. Finally, we can obtain improved design model having parallel and Halbach magnetization with larger torque, compared with an initial design model.

• Korean Journal of Materials Research
• /
• v.5 no.1
• /
• pp.22-35
• /
• 1995

In this study, crystal structures and magnetic properties of as-ast, annealed and rapidly solidified Mn-A1-M( M=Cu, Fe) alloys have been investigated. In $Mn_{0.56}Al_{0.44}$ alloys, the largest fraction of $\tau$ phase and values of magnetic properties was obtained in Mnl, i6Alo or alloy. And this alloy was used as the basic composition. In $Mn_{0.56-X}M_{X}Al_{0.44}$ alloys, when annealed, $\tau$- and $\beta$-Mn phase appeared at x< 0.08, $\tau$- and $\kappa$ phase at 0.10 $\leq x \leq$ 0.12 and $\kappa$- phase only at 0.15 $\leq x \leq$0.20 . When rapidly solidified, specimens showed similar phases as when annealed except that $\varepsilon$ phase appeared at x=0.04. In Mnu FexAlo 44 alloys, asyast specimens showed $\tau$-, $\beta$-Mn and $\gamma_2$- phase at x<0.08 and K and $\beta$-Mn phase at x>0.10. When rapidly solidified, Mn-Fe-Al specimens showed $\varepsilon$-, $\gamma_2$- and small amount of $\tau$- and $\kappa$ phase at x<0.08 and $\kappa$- phase only at 0.$\leq x \leq$0.20. All the alloys investigated were ferromagnetic. The Curie temperature of annealed specimens and rapidly solidified of Mno 5sAlu 44 alloy were -650K and -644K. Spontaneous magnetization( UII of annealed and rapidly solidified specimens were 40-45 (emu/g) and 50-52(emu/g), respectively. Remanent (M,) to saturation magnetization( Ms) ratio was -0.7. M, of rapidly solidified specimen was about 48(emu/g). Magnetic properties of $Mn_{0.56}Al_{0.44}$ alloys were found to be determined by the relative fraction of ferromagnetic r- and K- phase. When M= Cu and x=0.15, maximum as($\sigma_{0.0}$) was obtained by about 64.3 emu/g), and when M=Fe and x=0.15, 66.4( emu/g). The Curie temperature decreased as x increased.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.291-292
• /
• 2016

LLC 컨버터는 간단한 구조와 자화 인덕터를 이용한 모든 부하 영역에서의 영 전압 스위칭으로 인하여 많은 응용분야에서 널리 사용되는 컨버터 토폴로지이다. 본 논문에서는 통상적으로 0.5의 시비율로 동작하는 LLC 컨버터의 성능을 더욱 향상시키기 위하여 PWM 제어방식을 두 가지 응용 분야에 적용한 내용을 소개하고자 한다.