• Journal of Sericultural and Entomological Science
• /
• v.31 no.1
• /
• pp.45-54
• /
• 1989

본 연구에서는 견에 대한 산성염료의 염착기구를 규명하기 위하여 전하수가 다른 산성염료에 의한 흡착실험을 수행하여, 견섬유와 피브로인막의 구조와 염료의 구조를 관련시켜서 산성염료의 흡착거동에 관한 해석을 하였다. 산성염료에 sulfonic acid group이 도입됨에 따라서 partition coefficient(Kp)는 감소하였지만 Langmuir type sorption constant(KL)는 증가하였고, 염욕의 pH와 온도의 증가에 따라서도 Kp, KL 값은 증가하였다. 전하수가 1, 2인 Dye I과 Dye II는 견섬유와 피브로인 막에 대하여 stoichiometric adsorption이 잘 적용될 수 있었으나 전하수가 3인 Dye III는 잘 적용되지 않았다. sulfonic acid group이 산성염료에 도입됨에 따라 각각의 sulfonic acid group의 표준친화력은 감소하였고, 모든 엔탈피 값은 음(-)으로 나타난 반면에 엔트로피 값은 양(+)으로 나타났다. 견섬유와 피브로인 막의 흡착 constant를 비교한 결과, 견 피브로인에 대한 산성염료의 흡착거동은 견 피브로인의 구조에 영향을 받는다는 것을 알 수 있다.

• KSBB Journal
• /
• v.14 no.1
• /
• pp.31-35
• /
• 1999

A biosorption of azo and reactive dyes into the intact and modified biomass of Penicillium janthinellum were investigated. Initial pH of medium affected the initial adsorption rate and decolorization. The initial optimum pH was found to be 2.0, and the maximum adsorption rates of dyes were $40^{\circ}C$. The reactive dyes called Apollocion Red 7EB, Apollofix Red SF-3B and Apollocion Red H-E3B showed the high initial adsorption rates as 0.06, 0.086 and 0.079 mg/g.min, respectively. A mixture of dyes containing azo and reactive dyes was adsorbed to the biomass of Pen. janthinellum and revealed that the initial adsorption rate was 0.084 mg/g.min. Both percent decolorization and the influence on the dye adsorption rate. Modified biomass of Pen. janthinellum was also investigated for the dye adsorption and the superior dye loading performance was observed compared with the ion-exchange/chelating resins used for removal of Apollocion Red 7EB.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.200.1-200.1
• /
• 2014

$TiO_2$에 니켈과 질소가 도입된 촉매를 합성하여 광촉매 활성을 연구하였다. degussa는 methylene blue 분자에 대하여 흡착능력을 거의 나타내지 않았으나, 니켈과 질소의 양이 최적화된 촉매에서는 최대 흡착량이 13.01 mg/g에 달하였다. Zeta potential 측정 결과 최대 -25.46 mV의 음전하를 나타내었으며, 각각의 촉매흡착성은 이와 비례하는 것으로 나타났다. 특히 니켈이 도입된 $TiO_2$는 흡착능력뿐만 아니라 가시광선을 이용한 MB분해 실험에서 우수한 광촉매 특성을 나타내었다.

• Applied Chemistry for Engineering
• /
• v.33 no.2
• /
• pp.151-158
• /
• 2022

In this paper, parameter characteristics such as pH effect, isotherm, kinetic and thermodynamic parameters and competitive adsorption of dyes including malachite green (MG), direct red 81 (DR 81) and thioflavin S (TS), which have different functional groups, being adsorbed onto activated carbon were investigated. Langmuir, Freundlich and Temkin isotherm models were employed to find the adsorption mechanism. Effectiveness of adsorption treatment of three dyes by activated carbon were confirmed by the Langmuir dimensionless separation factor. The mechanism was found to be a physical adsorption which can be verified through the adsorption heat calculated by Temkin equation. The adsorption kinetics followed the pseudo second order and the rate limiting step was intra-particle diffusion. The positive enthalpy and entropy changes showed an endothermic reaction and increased disorder via adsorption at the S-L interface, respectively. For each dye molecule, negative Gibbs free energy increased with the temperature, which means that the process is spontaneous. In the binary component system, it was found that the same functional groups of the dye could interfere with the mutual adsorption, and different functional groups did not significantly affect the adsorption. In the ternary component system, the adsorption for MG lowered a bit, likely to be disturbed by the other dyes meanwhile DR 81 and TS were to be positively affected by the presence of MG, thus resulting in much higher adsorption.

• Clean Technology
• /
• v.17 no.2
• /
• pp.97-102
• /
• 2011

The adsorption characteristics of amatanth dye by granular activated carbon were experimently investigated in the batch adsorption. Kinetic studies of adsorption of amaranth dye were carried out at 298, 308 and 318 K, using aqueous solutions with 100, 200 and 300 mg/L initial concentration of amatanth. It was established that the adsorption equilibrium of amaranth dye on granular activated carbon was successfully fitted by Langmuir isotherm equation at 298 K. The pseudo first order and pseudo second order models were used to evaluate the kinetic data and the pseudo second order kinetic model was the best with good correlation. Values of the rate constant ($k_2$) have been calculated as 0.1076, 0.0531, and 0.0309 g/mg h at 100, 200 and 300 mg/L initial concentration of amatanth, respectively. Thermodynamic parameter such as activation energy, standard enthalpy, standard entropy and standard free energy were evaluated. The estimated values for standard free energy were -5.08 - -8.10 kJ/mol over activated carbon at 200 mg/L, indicated toward a spontaneous process. The positive value for enthalpy, 38.89 kJ/mol indicates that adsorption interaction of amatanth dye on activated carbon is an endothermic process.

• Textile Coloration and Finishing
• /
• v.4 no.2
• /
• pp.84-88
• /
• 1992

셀룰로오스 펄프에 폴리비닐알코올의 블랜드, 가교, 및 카복시메칠화한 아니온성 셀룰로오스계 고분자 흡착제에 대한 모델 카치온 염료, C.I. Basic Red 18의 흡착 및 탈색 성능을 수용액계(pH 4.2)에서 검토하였다. 아니온성 셀룰로오스 고분자 흡착제의 카치온 모델 염료의 흡착등온성은 저농도 영역에서 Sigmoidal 형을 나타내었고 Donnan 흡착 모델 기구로 해석하였다. 하전기 도입에 따라 염료의 흡착능은 증가하였으며 이 흡착능력은 Sodium이온의 첨가에 의하여 저하하였다. 또 아니온 셀룰로오스계 흡착제에 의한 모델 염료의 배수 탈색율은 크게 증가하였으며 입상활성탄보다 우수한 탈색능력을 나타내었다.

• Clean Technology
• /
• v.13 no.3
• /
• pp.215-221
• /
• 2007

Biosorption is considered to be a promising alternative to replace the present methods for the treatment of dye-containing wastewater. In this study, sewage sludge was used as a biosorbent which could be one of the cheapest and most abundant biomaterials. The objective of this work is to develop a surface-modified biosorbent with enhanced sorption capacity and binding affinity. The FT-IR and potentiometric titration studies revealed that carboxyl, phosphateand amine groups played a role in binding of dye molecules. The binding sites for reactive dye Reactive Red 4 (RR 4) were identified to be amino groups present in the biomass. In this work, based on the biosorption mechanism, the performance of biosorbentcould be enhanced by the removal of inhibitory carboxyl groups from the biomass for practical application of the biosorbents. As a result, the maximum capacity of biomass was increased up to 130% and 210% of the increment of sorption capacity at pH 2 and 4, respectively. Therefore, chemically modified sewage sludge can be used as an effective and low-cost biosorbent for the removal of dyes from industrial discharges.

• The Journal of Natural Sciences
• /
• v.13 no.1
• /
• pp.35-50
• /
• 2003

Granular clay minerals for adsorption of the organic dye prepared a Na-Bentonite and optimum condition calcined temperature $700^{\circ}C$ and polyvinyl alcohol quantity was 25%. Granular clay mineral stable range was pH3 to pH9 and specific area was $83m^2/g$. The adsorption of the organic dye on the Granular clay mineral showed result good adsorption with acid medium and then enthalpy was -3.36 ~ -0.84 kcal/mol. It was exhibit typical physical adsorption.

• Composites Research
• /
• v.35 no.2
• /
• pp.98-105
• /
• 2022

In this study, polyvinyl alcohol (PVA)/graphene oxide (GO)/iron oxide (Fe₃O₄) magnetic microgels were prepared using a microfluidic approach and the dye adsorption capacity of the microgels was confirmed. The adsorption capacity (q_e) of the gels was evaluated by varying the dye concentration, pH, and contact time with the microgels. The dyes used in this work were methylene blue (MB), crystal violet (CV), and malachite green (MG), and microgels showed the highest adsorption capacity (191.1 mg/g) in methylene blue. The microgels exhibited the highest adsorption capacity in the dye aqueous solution at pH 10 due to the presence of atomic nitrogen ions (N⁺) on the dye molecules. The adsorption isotherm studies revealed that the Langmuir isotherm is the best fit isotherm model for the dye adsorption on the microgels, indicative of monolayer adsorption. The kinetic analysis exhibited that the pseudo-second order model fits better than the pseudo-first order model, confirming that the adsorption process is chemisorption. In addition, the magnetic microgels showed good reusability and recovery efficiency. It was confirmed that the adsorption capacity of the gels maintains more than 70% of the initial capacity after 5 times of cycle experiments.

• Textile Coloration and Finishing
• /
• v.6 no.4
• /
• pp.77-91
• /
• 1994

1956년 반응염료가 시판된 이래 장족의 발전을 하였으며, 구형의 cellulose용 염색을 추월하여 거의 대부분의 cellulose의 염색에 반응염료, 일변도로 사용되고 있는 것이 현실이다. 그러나 많은 반응 염료의 장점에도 불구하고 세월이 가면서 문제점도 만만치 않다. 장점으로는 색상이 선명하고 견뢰도가 우수하고 응용범위가 넓고 조작이 용이하다는 점이며, 문제점으로 나타난 것은 흡착염색공정에서 다량의 전해질과 알칼리제를 첨가함에도 불구하고 흡착율, 고착율이 낮고 염색후의 세정공정과 많은 물과 energy 및 시간을 필요로 한다는 사실이다. 또한 최근 더욱 관심을 끈 것은 반응염료의 가수분해 현상으로 인하여 다량의 가수분해된 염료가 폐수화하여 버려짐으써 심각한 공해가 야기할 뿐만 아니라 염색물에 부착하여 견뢰도에도 영향이 많다. 이런 문제를 염료제조업계에서는 해결하지 않으면 안될 시점에 와 있다. 이와 같은 문제점을 염료의 구조적인 면, 염색적인 면 그리고 소비자의 취급적인 면에서 검토하여 과거의 영광을 존속하기 위하여 개량형의 염료를 합성하여 고고착률, wash-off성의 양호 및 일광, 염소, 땀, 세탁 등에 견뢰한 염료를 얻고자 반응염료의 현황과 문제점을 정리해 보고자 한다.