• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1503-1504
• /
• 2011

염료 감응형 태양전지(Dye-sensitized Solar Cells, DSC)에서 고효율화를 위해 light scattering layer가 반도체 산화물 $TiO_2$와 함께 많이 사용되고 있다. 이것은 light scattering layer에 의해 빛의 이용률을 증가시킴으로써 DSC의 성능을 증대 시킬 수 있기 때문이다. 따라서 본 연구에서는 입자크기가 크고 반사율이 좋은 $Nb_2O_5$를 light scattering layer로 사용하여 $TiO_2$ layer를 통과한 빛을 다시 반사시켜 빛의 이용률을 증대시킴으로써 DSC 성능면에서 light scattering layer를 사용하지 않았을 때보다 전류밀도와 효율을 크게 증가시키고자 하였다. 그 결과 $V_{OC}$는 0.74V, $J_{SC}$는 17.95mA/$cm^2$, FF는 0.63, ${\Box}$는 8.38%로 기존의 DSC 보다 전류밀도가 약 30%, 효율이 약 31% 증가한 좋은 결과를 얻을 수 있었다.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1505-1506
• /
• 2011

염료감응형 태양전지(Dye-Sensitized Solar Cell, DSSC)의 FTO 표면에 compact layer를 형성시켜 직접적인 마찰에 의한 전자의 재결합을 줄일 수 있다. 따라서 광전극에서의 compact layer의 효과를 최대화하기 위하여 $TiCl_4$ 용액에 acetic acid를 첨가하여 특성변화를 측정하였다. UV-Vis 분광기, I-V 특성곡선, EIS 분석장비를 이용하여 검토한 결과, UV-Vis 분광분석을 통해서 acetic acid를 첨가한 compact layer의 투과도가 현저하게 높아진 것을 확인하였다. 이 결과는 $TiCl_4$ 처리에 의하여 compact layer를 구성하고 있는 $TiO_2$ 입자의 응집현상이 개선되므로 표면특성이 향상되었기 때문이다. Acetic acid를 첨가한 compact layer가 입자응집으로 인한 표면저항의 감소를 유발하여, 전자의 이동이 원활해진 것을 내부 임피던스 분석을 통하여 확인하였다. Compact layer에 의해 재결합이 감소하여 효율이 향상된 것을 I-V 특성곡선을 분석하여 확인하였다.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1509-1510
• /
• 2011

염료 감응형 태양전지 동작에 있어 상대전극 표면에서 전해질의 산화, 환원 반응이 일어나기 위한 촉매의 역할이 중요하며 그 중 Pt는 촉매로써 널리 쓰이는 물질이다. Pt 도포 방식은 sputtering, Pt paste를 이용한 doctor blade, Pt solution을 이용한 spin coating 등 여러 가지가 있으며 제작 조건에 따라 그 특성도 다르게 된다. 따라서 본 연구에서는 Pt solution의 열처리에서 온도를 달리하여 그에 따른 특성을 알아보자 하였다. 그 결과 Pt solution 소성온도가 $400^{\circ}C$일 때, 가장 적절한 Pt층이 형성되기 때문에 산화, 환원반응이 활발하게 되어 높은 효율(6.8%)의 DSC 특성을 얻을 수 있었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.118.2-118.2
• /
• 2011

In order to increase the energy conversion efficiency of dye-sensitized solar cells (DSSCs), we employed a counter electrode that was platinum coated using a doctor blade technique on synthesized ZnO nanostructures on fluorinedoped tin oxide (FTO). The ZnO nanostructures possessing high electrochemical activity and large surface area of the counter electrode were grown by a chemical bath deposition (CBD) method at various times, 2, 4, and 8 h. The efficiency of DSSC with the Pt-ZnO counter electrode was improved 7.01% (grown for 2 h), 7.63% (grown for 4 h), and 6.13% (grown for 8 h), respectively. Compared with a standard DSSC without ZnO nanostructures, whose efficiency was 6.27%, the energy conversion efficiency increased approximately 22% for the DSSC with the Pt-ZnO (grown for 4 h) electrode. It indicates that the Pt coated on the ZnO nanostructure improves the electrocatalytic activity of the counter electrode.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.305-308
• /
• 2007

The field of dye-sensitized solar cell (DSC) is being researched actively at present. Because DSC has several advantages to pass the limits of Si solar cells such as a low manufacturing expense, a simple manufacturing process and its transparency. A lot of researches are underway about materials and processes in the field of dye-sensitized solar cell but its structure has been fixed up as the sandwich structure that both edges are used as positive and negative terminals. But the structure as of present is a factor of decreasing efficiency because the more electrons are recombined the further distance from terminal, considering about the characteristic of dye-sensitized solar cell that electrons generated inside cell are moved by diffusion. In this study, we made experiment on expanding the terminal to shorten internal moving distance of electron and compared the results according to the variation of active area to find out the effect of this trial. As a result, we achieved about 15.5% improvement of maximum power and 0.5% improvement of efficiency from terminal-expanded dye-sensitized solar cell of $2cm^{2}$ active area and concluded that the increasing rate of efficiency is raised as the active area becomes wider.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.309-312
• /
• 2007

Sputter deposition followed by surface treatment was studied using reactive RF plasma as a method for preparing titanium oxide($TiO_{2}$) films on indium tin oxide(ITO) coated glass substrate for dye-sensitized solar cells(DSSCs). Anatase structure $TiO_{2}$ films deposited by reactive RF magnetron sputtering under the conditions of $Ar/O_{2}$(5%) mixtures, RF power of 600W and substrate temperature of $400^{\circ}C$ were surface-treated by inductive coupled plasma(ICP) with $Ar/O_{2}$ mixtures at substrate temperature of $400^{\circ}C$, and thus the films were applied to the DSSCs, The $TiO_{2}$ Films made on these exhibited the BET specific surface area of 95, the pore volume of $0.3cm^{2}$ and the TEM particle size of ${\sim}25$ nm. The DSSCs made of this $TiO_{2}$ material exhibited an energy conversion efficiency of about 2.25% at $100mW/cm^{2}$ light intensity.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.335-338
• /
• 2007

Cost effectiveness is an important parameter for producing DSSCs as compared to the widely used conventional silicon based solar cells. A fluorine-doped tin oxide (FTO) substrate coated with a catalytic amount of platinum is used as counter electrode in dye-sensitized solar cell. Carbonaceous materials are quite attractive to replace platinum due to their high electronic conductivity, corrosion resistance towards $I_{2}$, good catalytic effect and low cost. In this paper, the unit DSSCs with Pt and CNT as a counter electrode were connected in series-parallel externally, then the current-voltage curves were investigated to find out the connection characteristics of the DSSC with CNT counter electrode. The connection characteristics of the DSSC with CNT counter electrode is superior to that of the DSSC with Pt counter electrode. And a parallel connection of the DSSC with CNT counter electrode has higher efficiency than a series connection of that.

• Transactions of the Korean hydrogen and new energy society
• /
• v.24 no.5
• /
• pp.421-427
• /
• 2013

We report on the time dependent degradation of cell in dye-sensitized solar cells (DSSC). The photovoltaic performance of DSSC over a period of time was investigated in liquid electrolyte based on triiodide/iodide during six days. It was found that the short circuit current density ($j_{sc}$) of the cell dropped from 9.9 to $7mA/cm^2$ while efficiency (${\eta}$) of the cell decreased from 4.4 to 3.3%. The parameters corresponding to fundamental electronic and ionic processes in a working DSSC are determined from the electrochemical impedance spectrascopy (EIS) at open-circuit potential ($V_{oc}$). EIS study of the DSSC in the this work showed that the electron life time ${\tau}_r$ and chemical capacitance $C_{\mu}$ decreased significantly after six days. It was correlated the $j_{sc}$ and efficiency decreased after six days.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.453.2-453.2
• /
• 2014

그래핀을 수직으로 성장한 형태인 탄소나노월(Carbon nanowall; CNW)은 탄소를 바탕으로 하는 다른 나노물질에 비해 표면적이 상당히 넓은 물질로 전극에 활용하여 소자 성능향상을 기대 할 수 있다. 또한 탄소를 기반으로 하는 나노 구조물중에서 가장 높은 표면밀도를 가진다. CNW를 차세대 염료감응형 태양전지(Dye sensitised solar cells; DSSC)의 상대전극으로 사용한다면 기존대비 광변환 효율을 향상시킬 수 있어 새로운 상대전극으로 활용 가능하다. 또한 CNW는 다른 촉매 없이 직접성장이 가능함으로 불순물 제거공정이 필요하지 않고, 공정시간이 짧아 대량생산에 용의하다. 본 연구에서는 마이크로웨이브 PECVD 장비를 사용하고 메탄(CH4)을 반응가스로 사용하여 CNW 하부전극을 제조하였다. CNW 하부전극의 광 변환효율을 관찰하기위해서 합성시간을 변화를 주었다. 제조된 DSSC의 광 변환 효율을 측정하기 위해 Solar simulator 장비를 사용하여 제작된 cells의 효율을 측정하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.350-354
• /
• 2009

In this work, polymer - inorganic composites have prepared using polymer such as polyethylene glycol (PEG)/poly (methyl methacrylate, PMMA) and inorganic nanofillers materials such as TiO2 nanotubes (TiNTs)/carbon nanotubes (CNTs). The extensive structural, morphological and ionic properties revealed that the high surface area and tubular feature of nanofillers improved the interaction and cross-linking to polymer matrix which is significantly enhanced the ionic conductivity and electrical properties of composite electrolytes. Comparably high conversion efficiency ~4.5% has been observed by using the newly prepared PEG-TiNTs composite solid electrolyte as compared with PMMA-CNTs electrolyte based DSSCs (~3%). The detailed comparative properties would be discussed in term of their structural, morphology, ionic and photovoltaic properties.