• Membrane Journal
• /
• v.20 no.4
• /
• pp.312-319
• /
• 2010

Carbon membrane materials have received considerable attention for the gas separation including hydrocarbon mixture of ingredients of the volatile organic compounds(VOCs) because they possess their higher selectivity, permeability, and thermal stability than the polymeric membranes. The use of activated carbon membranes makes it possible to separate continuously the VOCs mixture by the selective adsorption-diffusion mechanism which the condensable components are preferentially adsorbed in to the micropores of the membrane. The activated carbon hollow fiber membranes with uniform adsorptive micropores on the wall of open pores and the surface of the membranes have been fabricated by the carbonization of a thin film of phenolic resin deposited on porous alumina hollow fiber membrane. Oxidation, carbonization, and activation processing variables were controlled under different conditions in order to improve the separation characteristics of the activated carbon membrane. Properties of activated carbon hollow fiber membranes and the characterization of a gas permeation by pyrolysis conditions were studied. As the result, the activated carbon hollow fiber membranes with good separation capabilities by the molecular size mechanism as well as selective adsorption on the pores surface followed by surface diffusion effective in the recovery hydrocarbons have been obtained. Therefore, these activated carbon membranes prepared in this study are shown as promising candidate membrane for separation of VOCs.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.415-415
• /
• 2008

수분을 첨가한 열화학기상증착으로 $850^{\circ}C$에서 길게 수직 성장한 다중벽 탄소나노튜브를 합성하였다. 실리콘 웨이퍼에 열 증착기로 Al 15 nm를 입히고 그 위에 촉매 층으로 Fe 0.5 nm 를 증착한 기판을 사용하였다. 탄소나노튜브의 성장에는 분위기 가스로 Ar을, 성장 가스로 $C_2H_2$를 사용하였다. 이들 가스를 이용한 합성 중에 약 100 ppm 전후의 수분을 첨가함으로써 탄소나노튜브의 성장 길이를 10 배 가량 증가시켰다. 이것은 합성 중의 수분 첨가로 인해 금속촉매 입자들의 활동성이 증가하였기 때문이다. 수분의 첨가량를 달리하여 합성한 탄소나노튜브의 길이와 정렬도를 관찰하기 위해 주사전자현미경 (scanning electron microscopy, SEM)을 이용하였고, 탄소나노튜브의 정확한 지름과 벽의 개수를 파악하기 위해 투과전자현미경 (transmission electron microscopy)을, 결정성을 파악하기 위해 Raman 분광기를 사용하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.22-25
• /
• 2005

The thermal degradation of carbon/phenolic composite have been studied at high temperature by using thermogravimetric (TGA). A heating .ate of 5, 10, 15, 30 and $50^{\circ}C/min$ was used for the determination of thermal decomposition parameters of composite materials at high-temperature service. It has been shown that as the heating rates is increased, the peak decomposition rates are occur at higher temperature. Based on results of thermogravimetric analysis, the pyrolysis process is analyzed and physical and mathematical models for the process are proposed. The thermal analysis also has been conducted using transient heat conduction and the in-depth temperature distribution and the density profile were evaluated along the solid rocket nozzle. As a future effort the thermal decomposition parameter determined in this investigation will be used as input to thermal and mechanical analysis when subjected to solid rocket propulsion environment.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.233.2-233.2
• /
• 2016

Graphite의 순도, 결함, 결정층, 전기저항이 개선을 위하여, 10,000K 이상의 초고온 RF 열플라즈마 처리에 관한 연구를 수행하였다. 방전가스는 Ar을 사용하고, 특성 개선을 위하여 첨가가스로 $H_2$, $CH_4$을 첨가하여 흑연의 열플라즈마 처리에 의한 특성을 고찰하였다. Energy Dispersion Spectroscopy을 이용한 탄소 함량 분석 결과, 75wt% 저급 흑연에 함유된 유무기 불순물은 고온의 플라즈마에 의해 제거되어 99wt% 이상으로 순도가 개선되었고, XRD 및 Raman 분석으로부터 고온 열처리를 통한 탄소원자의 재배열로 흑연의 $sp^2$결함이 감소되고, 결정성이 향상됨을 확인하였다. 또한 열플라즈마로 처리된 흑연입자에 대한 분체저항 측정 결과, $10^{-3}{\Omega}{\cdot}cm$에서 $10{-4}{\Omega}{\cdot}cm$로 감소되었다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.8 no.1
• /
• pp.81-84
• /
• 2004

A water-cooled calorimeter chamber with 8 cooling channels based on KSR-III sub-scale chamber has been designed and manufactured. One dimensional empirical correlation has been used at the design stage and full three-dimensional CFD analysis has been conducted to confirm the cooling condition for hot fire test is safe. Predicted heat flux is accurate around the nozzle throat when the thermal resistance of carbon deposit is considered. However relatively large difference is observed in chamber part.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.445-447
• /
• 2008

본 연구에서는 다중벽 탄소나노튜브용 표면개질제를 리빙라디칼중합법을 통하여 제조하고, 이를 이용하여 표면개질되고 분산제어된 다중벽탄소나노튜브를 제조하고 염료감응형 태양전지의 대전극 재료로 사용하였다. 우선 리빙라디칼중합법 중 nitroxide mediated polymerization (NMP) 기술을 이용하여 poly(maleic anhydride-co-p-acetoxystyrene)-block-poly(p-acetoxystyrene)를 합성하고, 공중합체중의 maleic anhydride기에 이미드화 반응을 통하여 pyrene기를 도입하였다. 공중합체 중의 p-acetoxystyrene 반복단위들은 가수분해 반응을 통하여 p-hydroxystyrene 반복단위로 변환하였으며, 제조된 공중합체의 구조와 열 특성 등을 GPC, GC, $^1H$-NMR, TGA을 통하여 분석하였다. 제조된 공중합체를 이용하여 다중벽 탄소나노튜브의 표면을 polymer wrapping법으로 처리하였고, 표면개질된 탄소나노튜브의 분산성을 다양한 용매에서 비교분석하였다. 표면이 개질되고 페이스트 내에의 분산성이 향상된 다중벽탄소나노튜브를 염료감응태양전지의 대전극 제조에 응용하였으며, 표면처리 및 분산제어 여부에 따른 제작 특성 및 동작특성 등을 평가하였다.

• Clean Technology
• /
• v.19 no.3
• /
• pp.201-211
• /
• 2013

Biochar is charred materials generated during pyrolysis processes in the absence of oxygen using biomass, resulting in high carbon contents. In recent years, biochar has attracted more increasingly due to its potential role in carbon sequestration, renewable energy, waste management, soil amendment for agricultural use, and environmental remediation. Since biochar has a long-term stability in soil for thousands of years, biochar can be carbon negative compared to carbon-neutral biomass energy that decomposes eventually. Moreover, when biochar is applied to soil, crop production can be largely improved due to its high pH and its superior ability to retain water and nutrients. This paper review the research trends of biochar including the principles of carbon sequestration by biochar, its physico-chemical properties, and its applications on agricultural and environmental area.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.220-220
• /
• 2008

물 첨가 열화학기상증착을 이용하여 750도에서 길고 수직 성장한 다중벽 탄소나노튜브를 합성하였다. 사용된 기판으로는 우선 실리콘 웨이퍼에 열 증착기로 확산 방지층으로 Ti 50 nm를 입히고 그 위에 Al 15 nm를 입히고 난 후 촉매 층으로 Invar 36 (63 wt% Fe, 37 wt% Ni)을 1 nm 얇게 증착하였다. 탄소나노튜브의 성장에 사용된 가스는 Ar, $C_2H_2$ 이다. Ar은 분위기 가스로 사용되었고, $C_2H_2$는 탄소나노튜브의 성장에 관여하는 가스이다. 또한, 합성중에 약간의 물을 첨가함으로 기존의 탄소나노튜브 성장 길이보다 10배 가량 더 성장 하였다. 이것은 합성 중의 물 첨가로 인해 촉매 입자들의 활동성이 기존에 비해 더 증가했다는 것을 보여준다. 합성된 탄소나노튜브의 길이와 정렬도를 보기 위해 주사전자현미경 (scanning electron microscopy, SEM)을 이용하였고, 탄소나노튜브의 지름과 벽의 개수를 파악하기 위해 투과전자현미경 (transmission electron microscopy)을 이용하였다.

• Applied Chemistry for Engineering
• /
• v.32 no.6
• /
• pp.640-646
• /
• 2021

In this study, pitch was synthesized using pyrolysis fuel oil (PFO). Coke with mesophase microstructure was then prepared from the synthesized pitch and its properties were evaluated. Pitch was synthesized by poly-condensation reaction, which is an endothermic reaction at a temperature above 400 ℃ because the PFO was mainly composed of molecules with two to three aromatic rings. The Coke reactor was composed of the pretreatment reactor, preheater for applying heat energy, and coke drum for inducing microstructure of coke. Coke was prepared from synthesized pitch by controlling the temperature of the preheater to 400~490 ℃, and properties were evaluated by polarization microscope, XRD and Raman spectroscopy. The coke prepared at a preheater temperature of 460 ℃ identified flow anisotropic microstructure, and the electrical conductivity was 72.0 S/cm due to high crystallinity. And the flow anisotropic coke showed approximately 2.2 times higher electrical conductivity than that of Super-P, a conductive carbon material.

• Journal of the Korean Vacuum Society
• /
• v.17 no.2
• /
• pp.90-95
• /
• 2008

We studied the effect of thermal annealing and hydrofluoric (HF) acid treatment on the field emission properties of carbon nanotube field emitter arrays (CNT-FEAs) grown with the resist-assisted patterning (RAP) process. After thermal and HF treatment, it was observed that the electron emission properties were remarkably improved. The enhanced electron emission was also found to depend strongly on the sequence of the treatments; the electronemission current density is 656 $mA/cm^2$ with the process of thermal treatment prior to HF treatment while the current density is reduced by 426 $mA/cm^2$ with the reversal processes. This is due to the increased crystalline structure by thermal annealing and then strong fluorine bond was formed by HF treatment.