• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.11
• /
• pp.1423-1428
• /
• 2013

In this study, a heat dissipation measurement system is developed to analyze a 1.2-kW BLDC motor. It is important to check the temperature of the motor because an increase in temperature causes problems in the motor insulations, which in turn influences the motor life. A generator for a vehicle is installed to set up a load. We changed the load from 165 to 495 W. While the rpm varies from 2000 to 4000 under various load conditions, the changes in temperature were measured for the operating period by using a thermocouple. The results of experiments conducted under natural convection conditions suggest that the temperature was not stationary with the rpm, load, and coil of the motor and it kept increasing over $120^{\circ}C$. However, under forced convection conditions, the temperature stationarily reached $84^{\circ}C$ after 4000 s. The difference between the maximum and the minimum temperatures was $10-26^{\circ}C$ with an increase in the rpm and load. The orders of high temperature were as follows: motor coil (Ch#1), side of motor surface (Ch#5), inside of motor cap (Ch#2), upper side of motor surface (Ch#4), and inner wall of the motor (Ch#3).

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.4
• /
• pp.154-159
• /
• 2019

The glass-ceramic of $Li_2O-Al_2O_3-SiO_2$ system was fabricated by using yttrium oxide and iron oxide that it can reduce the melting temperature and affect the homogenization. Zirconium sulfate was used as a nucleation agent. Calcium phosphate was used to improve the flow the glass so as reduce the viscosity of the glass. The glass-ceramics met a thermal shock test of more than $750^{\circ}C$ and the temperature at which the coefficient of thermal expansion rapidly increased at over $800^{\circ}C$ was shifted by about the above $30^{\circ}C$. Therefore, it is concluded that the glass-ceramic of $Li_2O-Al_2O_3-SiO_2$ system with yttrium oxide and iron oxide was founded to have good melting conditions and excellent thermal expansion resistance at high temperature such as special field for kitchen utensils.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.04a
• /
• pp.44-44
• /
• 1999

전적으로 해외기술에 의존하고 있는 소프트 닙 캘린더 피복의 국산화를 위해 시험 제작 된 소프트 닙 캘린더용 연질롤의 캘린더링 효과를 구명하기 위해서 공정 변수에 따른 신문 용지의 물성변화를 평가하였다. 연질 롤로는 (주)광성고무롤에서 시험제작된 경도 90 Shore D의 것을 사용하였으며, 캘린 더링 시의 압력, 가열 롤의 표면온도, 닙 체류 시간, 유입지의 함수율 변화에 따른 신문용지 의 별크, 평활도, 광택도, 인장강도, 인열강도, 불투명도 변화를 조사하였다. 별크는 캘린더링 시 압력, 가열 롤의 표면온도, 닙 체류시간의 증가에 따라 감소하였다. 가열 롤의 표면온도가 높을수록 별크가 크게 감소되었으며, 닙 체류시간이 짧은 경우에는 1 120 226;C 이하에서 캘린더링을 실시하는 것이 별크 유지에 효과적이었다. 평활도는 가열 롤의 표연 온도, 닙 체류시간이 증가함에 따라 개선되었으며, 선압과 함 수율 증가에 의해서도 상승되는 경향을 보였. 인장강도는 유입지의 함수율, 닙 체류시간, 가열 롤의 표면온도가 모두 상승할 경우 증 가하는 결과를 나타내었다. 이는 함수율 증가에 의해 섬유의 유연성이 향상된 상태에서는 칼렌더링 온도와 닙체류 시간 증가에 의한 섬유의 기계적 변형과 열전달에 의한 섬유의 열 변형이 효과적으로 발생하여 섬유간 결합면적이 증가된 결과로 생각되었다. 인열강도는 소프트닙 캘린더링 후 전반적으로 감소하였으나 캘린더링 온도와 닙체류시 간은 인열강도에 미치는 영향은 적은 것으로 나타났다. 소프트 닙 캘린더링 시 발생하는 인 열강도의 저하를 막기 위해서는 닙 체류시간을 짧게 적용하고 섬유의 열변형이 종이의 표변 에서만 일어날 수 있도록 유입지 함수율과 가열롤의 표면온도를 적절히 조절하는 것이 필요 하리라 판단되었다.광택도는 온도와 압력이 증가할수록 증가하였으나, 닙 체류시간에 따라서는 큰 변화를 나타내지 않았으며 120도씨에서는 닙 체류시간의 증가에 따라 광택도가 오히려 감소하기도 하였다. 불투명도는 벌크와 마찬가지로 압력이 높고 가열롤의 표면온도가 높은 경우 낮게 나타 났다 특히 닙 체류시간의 증가에 따라 감소하는 경향을 보였다.보였다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.7
• /
• pp.427-431
• /
• 2017

In this paper, we discuss ${\beta}-Ga_2O_3$ thin films that have been grown on freestanding GaN (FS-GaN) using furnace oxidation. A GaN template was grown by horizontalhydride vapor phase epitaxy (HVPE), and FS-GaN was fabricated using the laser lift off (LLO) system. To obtain ${\beta}-Ga_2O_3$ thin film, FS-GaN was oxidized at $900{\sim}1,100^{\circ}C$. Surface and cross-section of prepared ${\beta}-Ga_2O_3$ thin films were observed by field emission scanning electron microscopy (FE-SEM). The single crystal FS-GaNs were changed to poly-crystal ${\beta}-Ga_2O_3$. The oxidized ${\beta}-Ga_2O_3$ thin film at $1,100^{\circ}C$ was peel off from FS-GaN. Next, oxidation of FS-GaNwas investigated for 0.5~12 hours with variation of the oxidation time. The thicknesses of ${\beta}-Ga_2O_3$ thin films were measured from 100 nm to 1,200 nm. Moreover, the 2-theta XRD result indicated that (-201), (-402), and (-603) peaks were confirmed. The intensity of peaks was increased with increased oxidation time. The ${\beta}-Ga_2O_3$ thin film was generated to oxidize FS-GaN.

• Journal of the Korean Solar Energy Society
• /
• v.39 no.6
• /
• pp.93-112
• /
• 2019

In this paper, a very new web-based software for renewable energy system (RES) design and economic evaluation was introduced. This solution would provide the precise RES estimation service including not only photovoltaic (PV), wind turbine (WT) and fuel cell (FC) individually but also energy storage system (ESS) as combined forms with PV or WT. The three reasons why we ought to develop it are: First, the standardized tool suitable to the domestic environment for estimating power generation from RES facilities and economic evaluation is required. Secondly, the standardized tool is needed to spread domestic RES supply policy and to promote the new industry in the micro-grid field. The last, the reliability of economic evaluation should be enhanced more for new facilities. To achieve those aims, the weather database of one hundred locations have established and the RES facility database has also constructed. For the energy management, mathematical models for PV, WT, ESS and FC were developed. As a final phase, the analytical process to evaluate economics has performed with field data verification.

• Journal of Mushroom
• /
• v.16 no.3
• /
• pp.203-207
• /
• 2018

'Daebak', a new cultivar of Grifola frondosa, was bred by mating two monokaryotic strains isolated from 'F14309' and 'GMGF44062' at the Mushroom Research Institute, Gyonggi-Do ARES in 2017. The optimum temperature for mycelial growth of 'Daebak' was $25^{\circ}C$ on PDA medium. In bottle cultivation, the culture period of 'Daebak' was 57 days, which was 2 days shorter than that of 'Cham' (control). The pinheading rate of 'Daebak' was 98.4%, which was 24.8% higher than that of 'Cham' and its CV (Coefficient of variation) was 0.6%, 5.3% lower than that of 'Cham'. Regarding the growth characteristics of 'Daebak', the diameter and thickness of the pileus were 27.7 mm and 1.73 mm, respectively, and the diameter and height of the fruiting bodies cluster were 132 mm and 87.2 mm, respectively. The pileus was thinner but the fruiting bodies cluster was larger than that of 'Cham'. Fruiting bodies weighed 139 g per 1,100 ml bottle of 'Daebak', which was 28% higher than that for 'Cham', with a CV of 2.5%, which was 6.2% lower than that of 'Cham'. The yield per 10,000 bottles (used for cultivation) of 'Daebak' was 1,376 kg, 70% higher than that of 'Cham', with a CV of 3.0% that was 11.5% lower than that of 'Cham'. With respect to physical characteristics, the strength and brittleness of the fruiting body of 'Daebak' was less than that of 'Cham'. When considering the period available for sale, the shelf life of 'Daebak' was 42 days, which was 6 days longer than that of 'Cham'.

• Journal of Korean Society of Forest Science
• /
• v.65 no.1
• /
• pp.80-91
• /
• 1984

The purposes of this study are to analyze and forecast the domestic demand for papers by regression models with time-series data (1965-81). For the period of 1965-81, the real GNP of Korea grew at annual average increase rate of 8.8 percent. On the other hand, the domestic demand of papers grew at annual average increase rate of 17.9 percent in this period. Especially, the annual average increase rate for board-papers accounted to 25.8 percent. To analyze domestic demand for papers, GNP, per capita GNP, price findex of papers, production activity index of the major papers consuming industries and price index of substitutive goods were selected as independent variables. The expected values of domestic demand for papers were computed by forecasting equations as follows. T-values are in parentheses. ${\ell}nDDP=2.452+1.986{\ell}nPG-0.844{\ell}nPWI$ $(33.397)^*\;(-6.149)^*\;R^2=0.997$ ${\ell}nDDP=6.468+0.827{\ell}nPDA$ $(17.403)^*\;R^2=0.950$ DDP : Domestic demand for papers PG : Real GNP per capita (1,000 won) PWI : Real price index of papers (1980 = 100) PDAV : Production activity index of the major papers consuming industries The results analyzed and forecasted by these models are summarized as follows: The domestic demand for papers had positive correlation toward per capita GNP and production activity index of the major papers consuming industries. Per capita GNP elasticity of the domestic demand for papers was the most elastic among independent variables. The price elasticity of domestic demand for papers had negative sign and inelastic. These were not only statistically significant but theoretically compatible. The domestic demand for papers was projected to be 3,152-4,470 thousand mit in 1991, representing at annual increase rate of 5.0-12.4 percent during the period of 1982-91. Domestic demand for papers per capita was projected to be 69.1-98.0 kg in 1991.