• Journal of the Korean Society for Railway
• /
• v.13 no.5
• /
• pp.535-540
• /
• 2010

We present an optimization model for how to assign the freight trains to transshipment tracks and allocate the containers to the freight trains in a rail container terminal. We formulate this problem as a multi-criteria integer programming to minimize the makespan of job schedule and simultaneously to maximize the loading throughput, i.e. the number of containers to be disposed per day. We also apply our model to the instance obtained from the real-world data of the Uiwang Inner Container Depot. From the experiments, we can see an improvement of approximately 6% in makespan, which means that our model can contribute to the improvement of the disposal capacity of containers without additional expansion of facilities.

• KIPE Magazine
• /
• v.14 no.5
• /
• pp.25-30
• /
• 2009

현대중공업은 철도차량 전장품 분야에서 주변압기, 추진제어장치, 보조전원장치, 배터리 충전기 등 다양한 제품의 개발에 노력을 기울여 관련 산업 및 기술 발전에 기여해 왔다. 특히 전동차용 추진제어장치는 국내 최초로 국산화 및 상용화에 성공하여 광주지하철과 대전지하철에 납품한 실적을 가지고 있으며 최근에는 고속열차용 주전력변환장치를 세계에서 네 번째로 개발 및 상용화 하여 신규 고속열차인 KTX-II에 적용하였다. 본 논문에서는 고속열차용 추진제어장치의 기술 동향과 추진제어 장치의 설계 및 제작에 활용된 전력전자 기술에 대한 소개를 하고자 한다.

• Proceedings of the Korean Society for Environmental Edudation Conference
• /
• 2004.08a
• /
• pp.108-120
• /
• 2004

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.1
• /
• pp.135-144
• /
• 2021

In railway systems, it is common to obtain train location information through an infrastructure-based train detection system. However, this system has a problem that may provide incorrect location information due to non-detection and erroneous detection, which may cause an accident. Therefore, in this study, we propose a method of providing train location information using a sensor-based integrated navigation system. In order to provide accurate information; however, the reliability of the integrated navigation system must be verified. Therefore, in this paper, we develop a simulator that can generate a reference trajectory and sensor data based on the real trajectory and analyze the performance of the integrated navigation system according to various scenarios on the real trajectory.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.1
• /
• pp.203-210
• /
• 2000

Recently, environmental vibration by train operation has been getting such an attention that the ISO puts it into the environmental vibration regulation. However, the reasonable and efficient countermeasures against such a kind of vibration is not well established, especially in residential areas near the railroad. Therefore, it is very important to estimate the ground vibration induced by the train operation for the design and construction of track supporting structures as well as structures near the track. In this study a model estimating dynamic load on track due to train operation and analysis technique of propagation of ground vibration were developed. Futhermore, the estimated vibration from this model was compared with the actual measurement data in the field and found to be reasonably acceptable.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.3
• /
• pp.202-210
• /
• 2016

A thermal barrier coating (TBC) has been widely applied to machine components working under high temperature as a thermal insulator owing to its critical financial and safety benefits to the industry. However, the nondestructive evaluation of TBC damage is not easy since sensing of the microscopic change that occurs on the TBC is required during an evaluation. We designed an eddy current probe for evaluating damage on a TBC based on the finite element method (FEM) and validated its performance through an experiment. An FEM analysis predicted the sensitivity of the probe, showing that impedance change increases as the TBC thermally degrades. In addition, the effect of the magnetic shield concentrating magnetic flux density was also observed. Finally, experimental validation showed good agreement with the simulation result.

• Proceedings of the KSR Conference
• /
• 2002.10a
• /
• pp.528-533
• /
• 2002

This paper proposes the Train Control Monitoring System (TCMS) for the LRT(light rail transit). With regard to information processing in car, we build a computer network in the car, turned the hardware required for train control into software, and developed the Train Control Monitoring System.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.545-551
• /
• 2016

In this study, we evaluate the braking performance of an urban railway vehicle to verify its basic safety condition. The braking performance evaluation methods, deceleration measurement and braked weight percentage, were compared for trains with different numbers of cars, in order to assess the advantages of each method and their compatibility. With a probabilistic braking model, the effect of the adhesion coefficient distribution was analyzed in accordance with the train composition. A train with many cars has a narrower deceleration distribution width than one with few cars. The braked weight percentage method is expected to be useful in the design of train signal systems, because it allows the braking distance to be calculated for various initial brake velocities. The deceleration distribution model and its results are expected to be useful as a basis for precise train signal design.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.219-219
• /
• 2003

HVOF(High Velocity Oxygen Fuel)법을 사용한 MCrAlY(M=Ni, Co, Fe)계 열차폐 코팅(thermal barrier coating)은 열기관 내부의 극심한 환경 부하에 대해 구조물 표면에 열적, 화학적 장벽을 형성함으로써 구조물의 내구성을 향상시킨다 이와 동시에 열차폐 효과는 구조물의 온도상승 없이 내부 가동 온도를 높일 수 있게 함으로써 열효율을 상승시키고 연료 효율을 높여 가동비용 절감을 이룰 수 있는 동시에 고 연소를 통한 오염원의 배출을 감소시킬 수 있다. 본 연구에서는 $H_2O$$_2$=5:1 분위기 하에서 HVOF법을 사용하여 Hastelloy-X 기판위에 125$\mu\textrm{m}$의 두께로 다음 5종류의 (Ni, Co, Cr)계 MCrAlY 코팅을 용사시켰다. 준비된 (Ni, Co)-Cr-Al-(Y, Ta, Re), (Ni, Co)-Cr-Al-(Y, Re), (Ni, Co)-Cr-Al-(Y, Ta), (Ni, Co)-Cr-Al-Y, (Ni,Co)-Cr-Al-Ir 코팅시편에 대한 산화성질을 조사하기 위해 대기 중 1000, 1100, 120$0^{\circ}C$에서 50, 100, 150, 200시간 등온실험(Isothermal oxidation)을 실시하였고, XRD, SEM/EDS, EPMA를 이용하여 생성된 산화막과 코팅 시편의 조직 변화를 조사하였다. 산화온도와 산화시간이 증가할수록 산화막의 박리가 많이 발생하였으며, 분석 결과 미세하게 분포된 a-Al$_2$O$_3$ 입자, NiCr$_2$O$_4$스피넬 상, 미세한 Cr$_2$O$_3$가 관찰되었고, 코팅 조성 변화에 따라 형성되는 이들 산화물의 존재비가 달라졌으며, 산화온도가 높아질수록 산화속도가 가속화되었다.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.295-296
• /
• 2010

본 논문에서는 고속전철용 추진제어장치의 개발 및 본선 주행시험에 관한 내용을 소개하였다. 고속열차용 추진제어장치는 입력 전류의 고조파를 감소하기 위하여 단상 PWM 컨버터 2대가 병렬로 구성되고 인버터는 3상 인버터 1대로 구성된다. 추진제어장치의 전력회로를 간단히 구성하기 위하여 최대용량(4500V/4200A)의 IGBT 전력소자를 적용하였다. 3상 인버터는 가속시 스위칭 기어현상을 저감하기 위하여 저주파 동기 PWM 기법을 적용하였다. 추진제어장치의 성능을 평가하기 위하여 실제 차량이 운행될 본선에서 속도 300km/h까지 가속시험, 비상제동 시험, 구배기동 시험 등을 실시하였다. 시험을 통하여 제작된 추진제어장치가 성능사양을 만족함을 확인하였다.