• Journal of Mushroom
• /
• v.13 no.3
• /
• pp.212-216
• /
• 2015

A new commercial strain "Mongdol" of oyster mushroom was developed by hyphal anastomosis. It was improved with hybridization between monokaryotic strain derived from Pleurotus ostreatus ASI 0627 and dikaryotic strain derived from P. ostreatus ASI 2929. The optimum temperature of mycelial growth and fruiting body development were $25{\sim}30^{\circ}C$ and $12{\sim}18^{\circ}C$, respectively. When two different media including PDA (potato dextrose agar medium) and MCM (mushroom complete medium) were compared, the mycelial growth of this mushroom was faster in MCM than in PDA. Similar result was observed with the control strain P. ostreatus ASI 2504. Analysis of the genetic characteristics of the new cultivar "Mongdol" showed a different DNA profile as that of the control strain ASI 2504, when RAPD (Random Amplified Polymorphic DNA) primer URP3 and URP6 were used. Fruiting body production per bottle was about 106 g using demonstration farms. The color of pileus was blackish gray and the stipe was long. Therefore, we expect that this new strain "Mongdol" will satisfy the consumer's demand for high quality mushrooms.

• Journal of Bio-Environment Control
• /
• v.26 no.4
• /
• pp.317-323
• /
• 2017

In this study, the heating performance and the energy saving effect of the heat pump system using hot waste water(waste heat) of the thermal power plant discharged from a thermal power plant to the sea were analyzed. The greenhouse area was $5,280m^2$ and scale of the heat pump system was 120 RT(Refrigeration Ton), which was divided into 30 RT, 40 RT and 50 RT. The heat pump system consisted of the roll type heat exchangers, hot waste water transfer pipes, heat pumps(30, 40, 50 RT), a heat storage tank and fan coil units. The roll type heat exchangers was made of PE(Poly Ethylene) pipes in consideration of low cost and durability against corrosion, because hot waste water(sea water) is highly corrosive. And the heating period was 5 months from October to February. During the heating performance test(12 hours), the inlet water temperature of evaporator was changed from $32^{\circ}C$ to $26^{\circ}C$, and heat absorption of he evaporator was changed from 175 kW to 120 kW. The inlet water temperature of the condenser rose linearly from $15^{\circ}C$ to $50^{\circ}C$, and the heat release of condenser was reduced by 40 kW from 200 kW to 160 kW. And the power consumption of the heat pump system increased from 30 kW to 42 kW. When the inlet water temperature of condenser was $15^{\circ}C$, the heating COP(Coefficient Of Performance) was over 7.0. When it was $30^{\circ}C$, it dropped to 5.0, and when it was above $40^{\circ}C$, it decreased to less than 4.0. It was analyzed that the reduction of heating energy cost was 87% when compared to the duty free diesel that the carbon dioxide emission reduction effect was 62% by recycling the waste heat of the thermal power plant as a heat source of the heat pump system.

• Korean Journal of Ecology and Environment
• /
• v.46 no.4
• /
• pp.488-498
• /
• 2013

A three-dimensional hydrodynamic model was applied to the Lake Euiam. The lake has three inflows, of which Gongji Stream has the smallest flow rate and poorest water. The dam-storage volume, watershed area, lake shape and discharge type of the Chuncheon Dam and the Soyang Dam are different. Therefore, it is difficult to analyze the water plume and mixing pattern due to the difference of the two dams regarding the amount of outflow and water temperature. In this study, we analyzed the effects of different characteristics on temperature and conductivity using the model appropriate for the Lake Euiam. We selected an integrated system supporting 3-D time varying modeling (GEMSS) to represent large temporal and spatial variations in hydrodynamics and transport of the Lake Euiam. The model represents the water temperature and hydrodynamics in the lake reasonably well. We examined residence time and spreading patterns of the incoming flows in the lake based on the results of the validated model. The results of the water temperature and conductivity distribution indicated that characteristics of upstream dams greatly influence Lake Euiam. In this study, the three-dimensional time variable water quality model successfully simulated the temporal and spatial variations of the hydrodynamics in the Lake Euiam. The model may be used for efficient water quality management.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2012.05a
• /
• pp.10-10
• /
• 2012

독일의 와인 생산지는 라인 강과 그의 지류를 따라 대개 서남쪽에 산재해 있다. 독일은 102,000 헥타르(2005년, 전 세계 포도밭의 1.3%)의 포도밭을 가지고 있으며, 매년 약 915만 3천 헥토리터(2005년, 전 세계 생산량의 3.24%)의 와인을 생산하고 있다. 이는 독일이 포도 재배면적으로는 세계 13번째 국가이며, 와인 생산량으로는 세계 8위를 나타내는 수치이다. 독일은 원래 화이트와인의 나라였으나, 레드와인의 생산이 1990년대와 2000년대에 급속히 증가하였다. 현재(2011년) 독일 포도밭의 64%가 화이트와인을 위해 경작되고 있으며, 36%가 레드와인을 위해 경작되고 있다. 화이트와인을 위한 주요품종이 리슬링(Riesling, 22%), 레드와인을 위한 주요품종은 쉬페트부르군더(Sp$\ddot{a}$tburgunder, Pinot Noir, 11.5%)로 알려져 있다. 독일은 다양한 형태의 와인을 생산한다. 드라이(dry), 세미스위트(semi-sweet)와 스위트한 화이트와인들(sweet white wines), 로제와인, 레드와인과 발포성 와인인 젝트(Sekt, 독일형 샴페인)이다. 독일 포도밭의 위치가 북쪽이므로, 독일은 유럽의 다른 나라와는 전혀 다른 다수의 훌륭한 품질의 와인을 생산한다. 오늘날 독일의 포도재배는 1세기에서 4세기쯤의 고대 로마시대부터 시작된 것으로 알려져 있다. 카롤루스 대제(Carolus Magnus, 747/748-814)의 시대 전에 독일의 포도재배는 비록 독점적이지는 않았으나 라인의 서부지역에서 주로 경작되었다. 카롤루스 대제는 포도재배를 라인가우에 보급한 것으로 추측되고 있다. 1787년에 아우스레제(Auslese)로 시작한 수확된 성숙도에 기반을 둔 와인의 후속 분류는 품질보증 고급와인 체계의 초석을 놓았다. 대부분의 현재 독일 와인법은 1971년에 도입되었으며, 그 이후 사용되어온 바와 같이 품질보증 고급와인의 이름이 정의되었다. 독일와인 지역은 세계에서 가장 북쪽인 북위 $50^{\circ}$도 부근에 위치한다. 북쪽의 기후이기 때문에 적합한 포도 품종에 대한 연구가 되어왔으며, 가이젠하임 포도 육종 연구소에서 뮐러-투르가우와 같은 많은 교배종이 개발되어 왔다. 최근에 지역 및 국제 수요가 높은 품질의 와인을 요구함으로서 리슬링의 재배가 증가해 왔다. 와인은 모두 자주 산맥으로 보호된 주로 라인 강과 그 지류인 강 주변에서 생산된다. 강들은 온도를 조절하는 충분한 미기후 효과를 갖는다. 토양은 태양의 열을 흡수해서 그것을 밤에 보존하는 점판암이다. 독일 와인산업은 다수의 작은 포도밭 소유자로 이루어져 있다. 1989/90년에 서부독일에 76,683개의 크고 작은 기업이 있었으나, 1999년에는 68,598로 줄어들었으며, 2010년도의 조사에 의하면 48,009개의 기업이 조업 중인 것으로 나타났다. 그들 자신의 와인을 팔지 않거나 상업화할 수 없는 더 작은 포도 재배자는 여러 가지 선택이 가능하다. 즉 포도를 팔거나, 와인-생산 조합의 기본 와인으로서 그것을 사용하는 와인제조 회사에게 대량으로 와인을 판다. 정말로 좋은 장소에 포도밭을 가진 사람들도 포도밭을 전체적으로 경작하기를 원하는 대량 생산자들에게 빌려주는 선택을 할 수 있다. 2010년에 각각 5ha 이상을 지닌 5,974개의 포도밭 소유자가 독일 전 포도밭 면적의 70.3%를 소유하며, 생업 와인생산자와 기업이 여기에 속한다. 그러나 그들 자신의 포도밭을 지닌 진정으로 큰 와인 양조장은 독일에서는 희귀하다. 2007년의 고에 묘 와인가이드(Gault & Millau Weinguide)에 의한 독일에서 가장 좋은 것으로 생각되는 10개의 와인 양조장 중에 10개가 10.2-19ha의 포도밭, 하나(Weingut Robert Weil, 산토리 소유)가 75ha의 포도밭을 소유하였다. 이것은 대부분의 높은 순위의 독일 와인 양조장 각각 매년 약 100,000병의 와인을 생산한다는 것을 의미한다. 가장 큰 포도밭 소유자는 헤센의 주 와인 양조장(Hessische Staatsweing$\ddot{u}$ter)으로 헤센의 연방주에 의한 소유이며, 200ha의 포도밭을 지니고, 3개의 별도 와인 양조장에서 제조된다. 가장 큰 개인이 소유한 와인 양조장은 팔츠에 있는 85.5ha를 지닌 독토르 뷔르클린-볼프(Weingut Dr. B$\ddot{u}$rklin-Wolf)이다. 2009년도의 독일에서 총 와인 생산량은 910만 헥토리터였으며, 그중에 206만 8천 헥토리터를 수출하였다. 그러나 그해에 총 수입와인 양은 1,266만2천 헥토리터였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.136-152
• /
• 2017

The thermodynamic models, PC-SAFT (Perturbed-Chain Statistical Associated Fluid Theory) state equation and the Two-model approach liquid activity coefficient model NRTL (Non Random Two Liquid) + Henry + Peng-Robinson, for modeling the Rectisol process using methanol aqueous solution as the $CO_2$ removal solvent were compared. In addition, to determine the new binary interaction parameters of the PC-SAFT state equations and the Henry's constant of the two-model approach, absorption equilibrium experiments between carbon dioxide and methanol at 273.25K and 262.35K were carried out and regression analysis was performed. The accuracy of the newly determined parameters was verified through the regression results of the experimental data. These model equations and validated parameters were used to model the carbon dioxide removal process. In the case of using the two-model approach, the methanol solvent flow rate required to remove 99.00% of $CO_2$ was estimated to be approximately 43.72% higher, the cooling water consumption in the distillation tower was 39.22% higher, and the steam consumption was 43.09% higher than that using PC-SAFT EOS. In conclusion, the Rectisol process operating under high pressure was designed to be larger than that using the PC-SAFT state equation when modeled using the liquid activity coefficient model equation with Henry's relation. For this reason, if the quantity of low-solubility gas components dissolved in a liquid at a constant temperature is proportional to the partial pressure of the gas phase, the carbon dioxide with high solubility in methanol does not predict the absorption characteristics between methanol and carbon dioxide.

• Journal of Life Science
• /
• v.23 no.8
• /
• pp.1025-1031
• /
• 2013

From a 95% ethanolic extract of H. diffusa, four marker compounds (HD1~HD4) were isolated, which were relatively unique and exist in comparably high contents. The structures of marker compounds were identified as digitolutein (1), 2-hydroxy-3-methylanthraquinone (2), (E/Z)-6-O-p-coumaroyl scandoside methyl ester (4:1 mixture) (3), and (E/Z)-6-O-p-methoxycinnamoyl scandoside methyl ester (4:1 mixture) (4), respectively, on the basis of $^{13}C$ and $^1H$-NMR analyses. The calibration curves of marker compounds showed high linearity, as their correlation coefficient ($R^2$) were in the range of 0.9991~0.9999. In addition, the limit of detection (LOD) and the limit of quantification (LOQ) were $0.03{\sim}0.07{\mu}g/ml$ and $0.099{\sim}0.231{\mu}g/ml$, respectively. The intra-day/inter-day precision and accuracy were 0.23~2.00%/0.25~1.16% and 94.60~108.44%/94.73-110.23%, respectively. The optimal HPLC conditions for the simultaneous quantification of HD1~HD4 were as follows: stationary phase; Merck Chromolith RP-18e ($100{\times}4.6mm$, $5{\mu}m$), column temp.; room temperature, UV detection at 280 nm, flow rate; 2.0 ml/min, injection volume; $10{\mu}l$, mobile phase; start with the mixture of 80% solvent A ($H_2O$ containing 0.5% acetic acid) and 20% solvent B (methanol containing 0.5% acetic acid) and gradually decrease solvent A to 40% in 9 min., then retain this condition to 18 min. Under the HPLC condition, the four marker compounds 1~4 were successfully separated without any interference of other constituents. The results obtained in this study are expected to be helpful for the development of nutraceutics and natural medicines and for the quality control of this plant.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.13 no.4
• /
• pp.176-184
• /
• 2011

Cold air on sloping surfaces flows down to the valley bottom in mountainous terrain at calm and clear nights. Based on the assumption that the cold air flow may be the same as the water flow, current models estimate temperature drop by regarding the cold air accumulation at a given location as the water-like free drainage. At a closed catchment whose outlet is blocked by man-made obstacles such as banks and roads, however, the water-like free drainage assumption is no longer valid because the cold air accumulates from the bottom first. We developed an empirical model to estimate quantitatively the effect of cold pool on nocturnal temperature in a closed catchment. In our model, a closed catchment is treated like a "vessel", and a digital elevation model (DEM) was used to calculate the maximum capacity of the cold pool formed in a closed catchment. We introduce a topographical variable named "shape factor", which is the ratio of the cold air accumulation potential across the whole catchment area to the maximum capacity of the cold pool to describe the relative size of temperature drop at a wider range of catchment shapes. The shape factor is then used to simulate the density profile of cold pool formed in a given catchment based on a hypsometric equation. The cold lake module was incorporated with the existing model (i.e., Chung et al., 2006), generating a new model and predicting distribution of minimum temperature over closed catchments. We applied this model to Akyang valley (i.e., a typical closed catchment of 53 $km^2$ area) in the southern skirt of Mt. Jiri National Park where 12 automated weather stations (AWS) are operational. The performance of the model was evaluated based on the feasibility of delineating the temperature pattern accurately at cold pool forming at night. Overall, the model's ability of simulating the spatial pattern of lower temperature were improved especially at the valley bottom, showing a similar pattern of the estimated temperature with that of thermal images obtained across the valley at dawn (0520 to 0600 local standard time) of 17 May 2011. Error in temperature estimation, calculated with the root mean square error using the 10 low-lying AWSs, was substantially decreased from $1.30^{\circ}C$ with the existing model to $0.71^{\circ}C$ with the new model. These results suggest the feasibility of the new method in predicting the site-specific freeze and frost warning at a closed catchment.

• Journal of Mushroom
• /
• v.9 no.2
• /
• pp.59-62
• /
• 2011

To develop a new cultivar of King oyster mushroom(Pleurotus eryngii), G09-21 as parental strain was selected by the method of Di-mon crossing between monokaryotic strains derived from ASI 2824(Keunneutari No.2) and dikaryotic strain ASI 2887(Aeryni 3). The Pe21-51($G09-21-10{\times}2844-11$) was shown the best cultural characteristics, selected to be a new cultivar and named as 'Song-A'. The 'Song-A' was formed incompatibility line distinctly in the confrontation growth of parental strains Keunneutari No.2, Aeryni 3 and ASI 2844. The optimum temperature for mycelial growth, fruiting body development and pH arrange were $25{\sim}30^{\circ}C$, $14{\sim}16^{\circ}C$ and pH5~8, respectively. Fruiting body production per bottle was about $94.7{\pm}29.5$ g which is almost 106% quantity compared to that of other cultuvar Keunneutari No.2. And also the stip is thick and long but the number of available stipe is few. Analysis of the genetic characteristics of the new cultivar 'Song-A' showed a different DNA profile as that of the control strains, Keunneutari No.2, Aeryni 3 and ASI 2844, when RAPD(Random Amplified Polymorphic DNA) primers URP4 and 7 were used. This new cultivar 'Song-A' of Pleurotus eryngii is characterized by a small number of primordia formation and the stip is thick and long. Therefore, we expect that this new strain will save of labor and cost by without culling work.

• Journal of Mushroom
• /
• v.17 no.4
• /
• pp.224-229
• /
• 2019

The two most common mushroom species grown in Korea are pearl oyster mushroom (Pleurotus ostreatus) and king oyster mushroom (P. eryngii). In recent years, the production of king oyster mushroom greatly increased due to the automation of the cultivation facilities, and it became a major export mushroom owing to its excellent shelf life. However, the increase in the production of king oyster mushroom led to a decline in its market price; thus, necessitating the development of new mushroom species that could replace king oyster mushroom, to diversify the mushroom market for the benefit of both, the producers and the consumers. The Mushroom division at the National Institute of Horticultural & Herbal Science (NIHHS) reported the development of a new interspecific hybrid between P. ferulae and P. tuoliensis, referred to as 'Creamy.' Two parental strains KMCC00430 (Bisan2ho, P. ferulae) and KMCC00461 (P. tuoliensis) were selected based on the results of genetic resource analysis, and their monokaryons were collected. About 1,000 Mon-Mon crosses were performed and 73 of them were selected. Following repeated cultivation tests and strain analyses, we selected strain 7773, which had a bright creamy pileus and a thick straight stipe, and named it 'Creamy.' Optimum temperature for mycelial growth of Creamy was 25-30℃, and that for fruiting body growth was 16℃. The pileus, which had a brighter creamy color, was small in size with a diameter of 61.2 mm. Although it was cultivated in suboptimal conditions, such as low temperature and high CO₂ concentration, Creamy was characterized by its straight and smooth stipe. Field production tests and further analyses indicated that the yield of Creamy was 5% higher than that of Baekhwang. It is expected that Creamy, the new interspecific hybrid with a bright creamy pileus and a pleasant flavor, will help create new opportunities for mushroom farmers and diversify the mushroom market.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.56 no.3
• /
• pp.212-218
• /
• 2011

This study was performed to determine the relative quality of mungbeans harvested in bulk after applying a labor-saving cultivation (LSC) method, compared to mungbeans harvested three different times under the conventional cultivation condition. There was no significant difference in starch, crude protein, and vitexin or isovitexin content of seed according to the cropping system or harvest time. The mungbeans grown under the LSC method had the highest crude fat content, followed by mungbeans from the third-, the second- and the first-harvest mungbeans under the conventional cultivation. No significant difference was found in the composite ratio of saturated fatty acids to unsaturated fatty acids according to cropping system or harvest time. The second-harvest mungbeans grown under the conventional cultivation condition had 17 different types of fatty acids, while the third-harvest mungbeans grown under the conventional cultivation and those grown under the LSC condition had the fewest types of fatty acids with 12. Of the major saturated fatty acids, palmitic acid and arachidonic acid had the highest composite ratio in the first conventional cultivation followed by the second, the third and the LSC. However, stearic acid showed the opposite tendency. Of the major unsaturated fatty acids, linoleic acid had the highest composite ratio in the first conventional cultivation, followed by the second and third conventional cultivation and the LSC. Amylogram characteristics of the mungbeans were significantly different according to cropping system and harvest times. The mungbeans harvested after the first conventional cultivation had significantly higher pasting temperature, peak viscosity, holding strength viscosity, final viscosity and breakdown, while mungbeans harvested after the third conventional cultivation had significantly higher setback viscosity. In contrast, the mungbeans harvested under the LSC methods had a significantly lower amylogram value. When harvest rate, color values and amino acid content of sprout were measured, mungbeans grown under the LSC conditions had a low harvest rate of sprout, but had Hunter's color values and amino acid content of sprout similar to those of mungbeans grown under the conventional cultivation condition.