• 제목/요약/키워드: 열교환기합성망

검색결과 5건 처리시간 0.021초

Core Exchanger 주변 열교환기들의 효율적인 에너지 관리를 위한 열 교환망 합성에 관한 연구

  • 조석연;서경원
    • 한국에너지공학회:학술대회논문집
    • /
    • 한국에너지공학회 1996년도 춘계학술발표회 초록집
    • /
    • pp.136-143
    • /
    • 1996
  • 본 연구에서는 정유공정의 한 부부인 demethanizer의 core exchanger 주위 열교환기들에 대해 핀치설계법(pinch desgin method)을 이용하여 새로운 열교환망 합성을 수행하였다. 이로부터 초기에 설정했던 최소접근온도차가 총비용, 즉, 장치비와 에너지 비용에 결정적인 역할을 하는 것으로 확인되었다. 따라서, 본 연구에서는 이 총비용의 목표값이 최소가 되는 최적 최소접근온도차가 존재하고, 이로부터 열교환망 합성이 수행되어져야 최적의 열교환망 합성이 이루어져야 한다는 결론을 얻었다.

  • PDF

열교환기망과 열시스템과의 최적 합성에 관한 연구 (A study on the optimal integration of heat exchanger network and heat system)

  • 안재성;이재효;김덕호
    • 설비공학논문집
    • /
    • 제11권6호
    • /
    • pp.799-807
    • /
    • 1999
  • Exergy analysis is widely used in energy system analysis for more efficient energy use. Pinch technology has focused on chemical plants, such as pure heat exchanger networks. In this study, the objective is to seek more effective means with integrating above two methods. In order to demonstrate effective result and to prove possibility for pinch analysis, the steam turbine is adopted to make heat recovery in the heat exchanger network. Three cases are introduced using the integration of exergy and pinch analysis. The standard steam turbine utility is the base case, and adding the heat pump to this system is the second case. The third case is the system with the heat pump and minimum utilities. The results show that the output power of steam turbine in the case(2) and case(3) are increased up to 42% and 46%, respectively, compared with that of base case.

  • PDF

최소 유틸리티 및 장치비를 위한 최적 열 교환망 합성 (Optimal Heat Exchanger Network Synthesis for Minimum Equipment Cost)

  • 김경숙;조영상;김호기
    • 에너지공학
    • /
    • 제1권1호
    • /
    • pp.87-96
    • /
    • 1992
  • 열교환기의 설치비 및 연간 비용에 주된 영향을 미치는 유틸리티의 소비와 열 교환 장치 수의 최소화를 목적으로 하여 경험법칙을 기초로 한 열교환망 합성 방법을 제안하였다. 본 연구에서 제안하는 열교환망 합성 알고리즘의 특징은 축소된 부문제 생성 기법과 부문제의 해를 구하는 방법에 있으며, 제안한 방법을 문헌에 실린 열교환망 합성 문제에 적용한 결과 이전의 결과보다 열교환장치 및 흐름의 분기등이 감소한 결과를 얻음으로써 본 방법의 우수성을 확인할 수 있었다.

  • PDF

고에너지물질 비군사화 시설의 후처리 공정 모사 및 열교환기 합성망을 이용한 에너지 최적화 (Simulation and Process Optimization of High Energetic Materials Demilitarization Facility Gas Treatment Process)

  • 황래문;김현수;오민;문일
    • 한국군사과학기술학회지
    • /
    • 제24권1호
    • /
    • pp.79-83
    • /
    • 2021
  • The expiration date of high energetic materials(HEM), such as HMX, RDX, TNT, is important. If the expiration date is violated, the expected specification of HEM would not be satisfied which may cause a different conclusion in an urgent situation. As a result, this HEM should maintain fresh conditions which cause the accumulation of waste HEM. If HEM is landfilled during demilitarization, the impact on living organizations is serious. Additionally, landfilling HEM has a possibility of explosion. In this research, the process flow diagram of the demilitarization gas treatment process was simulated while satisfying the law of the environment in Korea. After validation of simulation, it was optimized thermodynamically using Heat Exchanger Network Synthesis(HENs). This study is expected to enhance the energy efficiency of the original facility by suggesting developed designs. This research was supported by Agency of Defense Development NE32 Korea. Thanks to Agency of Defense Development, Korea

열통합 기법을 통한 이산화탄소 막 분리공정 에너지 해석 (Energy Analysis in CO2 Membrane Separation Process via Heat Integration)

  • 김성훈;김태영;김범석;조현준;여영구
    • 플랜트 저널
    • /
    • 제12권2호
    • /
    • pp.24-30
    • /
    • 2016
  • 이산화탄소 분리공정에 있어서 분리막 공정은 소형, 모듈성, 설치의 용이성, 작동의 유연성, 낮은 설치 비용 및 낮은 에너지 소비량 등의 장점들로 인하여 주목 받고 있다. 본 연구에서는 실험데이터와의 비교를 통해 교차흐름, 병류흐름, 향류흐름 3가지 모델의 정확도를 알아보았다. 실험에서 이용된 이산화탄소 분리공정을 가장 잘 나타내어주는 모델을 토대로 전산모사를 통하여 2단 막 분리 구조에서의 운전조건을 규명하고 분리막의 투과도 및 선택도가 분리성능에 미치는 영향을 알아보았다. 나아가 수증기 sweep을 이용하는 2단 막 분리 구조에서 열교환망 합성기법을 적용하여 열교환기 도입에 따른 소요 전력의 변화와 운전비용 절감효과를 살펴보았다.

  • PDF