• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.11C
• /
• pp.868-873
• /
• 2008

In this paper, we analyze the burst error performance of LDPC codes on perpendicular magnetic recording(PMR) channel. When burst error is generated on PMR channel, we use channel state information(CSI) to set the LLR information of channel detector zero. We consider the rate 0.94 LDPC codes and use SOVA as channel detector with low complexity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.10
• /
• pp.619-621
• /
• 2014

In this letter, an MMSE based continuous turbo equalizer is proposed for MIMO-HARQ systems. In the proposed scheme, the soft information from the reception process for the previous transmission is reutilized at the initialization of the reception process for the next transmission to enhance the decoding convergence speed. Simulation results verify that the proposed scheme achieves an improved BLER with a significantly accelerated decoding convergence speed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11A
• /
• pp.1803-1811
• /
• 2001

In this paper, Forward Error Correction(FEC) that is satisfied with ITU-T Recommendation J.83, Annex B(North American Data Over Cable Service Interface Specifications(DOCSIS) for Multimedia Cable Network System(MCNS)) is analyzed. The FEC consist of Reed-Solomon(RS) layer, interleaving layer, randomization layer, and trellis coded modulation(TCM) layer. The effects of quantization of input symbol and of trace-back depth in the Viterbi decoder are simulated over AWGN channels.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.1
• /
• pp.21-28
• /
• 2004

In this paper we apply block turbo coding at the transmitter and iterative decoding algorithm at the receiver for different operating modes, based on the 5 ㎓ IEEE 802.1 la WLAN system, instead of convolutional coding and soft decision viterbi algorithm to improve forward error correcting performance. Experimental results showed that each coding scheme outperforms coding gains of up to 3.5 ㏈ at the BER of 10$\^$-3/.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3199-3201
• /
• 1999

Convolutional coding with Viterbi decoding is known as a powerful method for forward error correction among many kinds of channel coding methods. This paper presents a soft decision Viterbi decoder which has systolic array trace-back architecture[1]. Soft decision is known as more effective method than hard decision and most of digital communication systems use soft decision. The advantage of using a systolic array decoder is that the trace-back operation can be accomplished continuously in an array of registers in a pipe-line fashion, instead of waiting for the entire trace-back procedure to be completed at each iteration. Therefore it may be suitable for faster communication system. We described operations of each module of the decoder and showed results of the logic synthesis and functional simulation.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.3
• /
• pp.59-67
• /
• 2013

Reed-Solomon (RS) codes are powerful error-correcting codes used in diverse applications. Recently, algebraic soft-decision decoding algorithm for RS codes that can correct the errors beyond the error correcting bound has been proposed. The algorithm requires very intensive computations for interpolation, therefore an efficient VLSI architecture, which is realizable in hardware with a moderate hardware complexity, is mandatory for various applications. In this paper, we propose an efficient architecture with low hardware complexity for interpolation in soft-decision list decoding of Reed-Solomon codes. The proposed architecture processes the candidate polynomial in such a way that the terms of X degrees are processed in serial and the terms of Y degrees are processed in parallel. The processing order of candidate polynomials adaptively changes to increase the efficiency of memory access for coefficients; this minimizes the internal registers and the number of memory accesses and simplifies the memory structure by combining and storing data in memory. Also, the proposed architecture shows high hardware efficiency, since each module is balanced in terms of latency and the modules are maximally overlapped in schedule. The proposed interpolation architecture for the (255, 239) RS list decoder is designed and synthesized using the DongbuHitek $0.18{\mu}m$ standard cell library, the number of gate counts is 25.1K and the maximum operating frequency is 200 MHz.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.12
• /
• pp.10-21
• /
• 2015

Cellular Network assisted device-to-device (D2D) communication has been growing to reduce the overload of eNodeB and mitigate the frequency shortage. However, by sharing the uplink frequency resource with the cellular network, the interference between cellular and D2D is increased. In this paper, we propose the advanced receiver based on soft decision to reduce the interference between cellular and D2D. The proposed receiver can suppress and cancel the interference by calculating the unbiased estimation value of interference signal using minimum mean square error (MMSE) or interference rejection combing (IRC) receiver. The interference signal is updated using soft information expressed by log-likelihood ratio (LLR). We perform a system level simulation based on the 20-MHz bandwidth of the 3GPP LTE-A system. Simulation results show that the proposed receiver can improve SINR, throughput and spectral efficiency compared to conventional receivers.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.6
• /
• pp.636-642
• /
• 2019

In this paper, we analyzed BER (Bit Error Rate) communication performance according to the detection order of MMSE (Minimum Mean Square Error) based soft decision interference cancellation. As the detection order method, antenna index order method, absolute value magnitude order method of channel elements, absolute value sum order method of channel elements, and SNR (Signal Noise Ratio) order method are proposed. BER performance for the scheme was measured and analyzed. As a simulation environment, 16-QAM (Quadrature Amplitude Modulation) modulation is used in an uncoded environment of an M×M multiple-input multiple-output system, and an independent Rayleigh attenuation channel is considered. The simulation results show that the performance gain is about 1.5dB when the SNR-based detection order method is M=4, and the performance gain is about 3.5dB when M=8 and about 3.5dB when M=16. The more BER performance was confirmed, the more the detection order method of the received signal prevented the interference and error spreading occurring in the detection process.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.2
• /
• pp.268-277
• /
• 2001

In this paper, the system performance with the convolution code using a Viterbi decoding and the one tap LMS equalizer applied to the OFDM system, which is suitable for IEEE 802.1la wireless LAN in indoor wireless channel, is analyzed through computer simulation. Indoor wireless channel is modeled as Rician fading channel, and QPSK and 16QAM scheme are used for subchannel modulation. In Rician fading channel with the power ratio of the direct path signal to the scattered signals, K=5 dB, BER of $10^{-4}$ is satisfied if the SNRs of the QPSK/OFDM and the 16QAM/OFDM are 8.6 dB and 19.2 dB in hard decision and 5.3 dB and 9.8 dB in soft decision, respectively. Compared with convolution code scheme, it is observed that 16QAM/OFDM system with the one tap LMS equalizer has the performance improvement of 8.6 dB and 2 dB in hard decision and soft decision, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.4A
• /
• pp.546-552
• /
• 2000

The decoding of Turbo-Code relies on the application of a soft input/soft output decoders which can be realized using maximum-a-posteriori(MAP) symbol estimator[l]. Radix-2 MAP decoder can not be used for high speed communications because of a large number of interleaver block size N. This paper proposed a new simple method for radix-4 MAP decoder based on radix-2 MAP decoder in order to reduce the interleave block size. A branch metrics, forward and backward recursive functions are proposed for applying to radix-4 MAP structure with symbol interleaver. Radix-4 MAP decoder shall be illustratively described and its error performance capability shall be compared to conventional radix-2 MAP decoder in AWGN channel.