• Korean Journal of Materials Research
• /
• v.5 no.8
• /
• pp.1013-1019
• /
• 1995

The thin plate of Co-Ni-P was deposited on the polyester film by the electroless plating method. Through present experiments, deposition rates and metal compositions of the plates were determined according to compositions of solution, pH and temperature. Also, magnetic properties of plates were examined according to metal compositions. Considering magnetic properties and deposition rates of electroless plating, the best condition was obtained as pH of 8.5 and 90℃. It was observed that metal compositions were evidently varied by the pH of solutions and the concentration of complex agents. However. they were not affected by other factors. At the optimum condition, the composition of the plate was Co(78%), Ni(16%), and P(6%). Also, it was found that the coercive force was 370 Oe, and squareness was 0.65 at this condition. Magnetic properties (hard or soft) of thin plates were determined by metal compositions. Therefore. the plate became soft magnetic plate as the composition of nickel increased over 30 per cents. The crystal structure of the soft magnetic plate was found to be amorphous in which it was strongly oriented to the (111)phahe of nickel. On the ohter hand, the hard magnetic place was found to be hcp crystalline of α-cobalt which was oriented to the (101)phase of cobalt and the (100)phase of cobalt.

• Journal of the korean Society of Automotive Engineers
• /
• v.18 no.5
• /
• pp.12-23
• /
• 1996

승용차용 소재로 사용되는 철강재료의 구성비율은 국가별, 차종별로 큰 차이를 나타내기 때문에 일률적으로 표현하기는 곤란하다. 일본의 경우 열연강판, 냉연강판, 내식성 확보를 위해 냉연강판의 표면에 여러가지 종류의 도금을 한 표면처리강판등의 보통강판이 약 76%를 차지하고 있으며 나머지는 고탄소강, 고합금강, 스테인리스강, 스프링강, 베어링강 등의 특수강재와 주철이 차지하고 있다. 본 해설에서는 승용차 차체용 소재의 대부분을 차지하는 냉연강판을 중심으로 냉연강판의 제조공정, 연진 냉연강판을 중심으로 냉연강판의 제조공정, 연질 냉연강판의 개발현황과 개발방향, 인장강도 35kgf/$min^{2}$이상의 냉연강판을 의미하는 고장력 냉연강판의 개발현황과 개발방향을 소개한후 현재 세계철강협회(IISI) 주관으로 범세계적으로 추진중인 초경량 자동차 차체(ULSAB, Ultra Light Steel Auto Body)제조를 위한 프로젝트의 진행과정 설명을 통해 경량재료에 대한 철강업체의 대응전략을 소개하고자 한다.

• Composites Research
• /
• v.26 no.5
• /
• pp.289-294
• /
• 2013

A thinner is used to improve the multi-walled carbon nano-tube (CNT) and carbon black (CB) dispersion in a polymer matrix and to make a soft electrode. The electrical and mechanical properties of the soft electrodes are investigated as functions of CNT, CB and thinner content. The optimal mixing condition for the electrode is thinner 80, CNT 3.5, CB 18 (phr) on the basis of matrix (KE-12). The specific resistance of that is 73 (${\Omega}{\cdot}cm$), and tensile strength, tensile modulus, and elongation of that is 0.45 MPa, 0.21 MPa, and 184%, respectively. Also, a simple structure of the actuator with an optimized electrode and elastomer is fabricated and its characteristic is evaluated. At the operating voltage 25 kV, the displacement of an elastomer KE-12 is 2.24 mm, and that of an elastomer KE-12 with thinner 50 (phr) is 4.05 mm. It shows a higher displacement compared to that of 3M 4910 which has similar modulus. The actuator made with elastomer and electrode of the same material (KE-12) may have advantages for fatigue life and application.

• Fire Science and Engineering
• /
• v.16 no.4
• /
• pp.77-84
• /
• 2002

In this paper, we had analyzed comsbustion gases using a GASTEC colorimetric gas detector tube according to the method of NES 713 in order to combustion gases toxicity evaluation for beads polystyrene foam, extruded polystyrene foam, rigid polyurethane foam, flexible polyurethane foam, flexible polyvinyl chloride pipe, vinyl floor cover, polyethyelene foam(flame retardant untreated) and polyethyelene foam (flame retardant treated) of plastics material. As results of gas analyses by using this method, comsbustion gases producted from small specimens of plastics material had reached fatal to man at 30 minutes exposure time that had possesed toxicity index of more than 1. Toxicity indexes of each specimen were estimated range of 4.3∼179.2, flexible polyvinyl chloride showed the hightest toxicity index at 179.2, and beads polystyrene foams showed the lowest toxicity index at 4.3.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.7-14
• /
• 2011

Soft copper tube is one of the popular materials which are used for shipbuilding, automobiles, and freezing and HVAC equipment. However, these materials have problems that they cause occasionally outside wrinkle, spring back, wall thinning phenomena. In this study, to avoid these phenomena, was manufactured a mild materials devoted bending machine, which selected a bending method where the mandrel presses the pipe along with the sliding guide rail during bending process. During the course of confirming this performance, it was found that as the diameter of copper tube used for materials became smaller, the spring back phenomenon increased. And as the bending angle became larger, it became larger. In addition, we could manufacture mold products which scarcely generated wrinkle when bending copper tubes.

• Journal of Conservation Science
• /
• v.22
• /
• pp.15-30
• /
• 2008

The roof tiles from the tomb in Baekje Kingdom of the Danjiri site in Gongju, Korea were studied for the production techniques and raw material provenance based on archaeometric characteristics. The roof tiles had traditional shapes of Baekje Kingdom, which show flow texture on the surfaces and sections with the roof tiles of hard or soft-type. These roof tiles were locally produced, using refining soils according to mineralogical and geochemical characteristics. Also roof tiles were divided to 2 groups by firing temperature and physical properties. One of them had soft with porous texture and fired probably about 700 to $900^{\circ}C$. The other had hard with vitrified texture and probably fired about 940 to $1,020^{\circ}C$. Buried for long time and used as a tomb, roof tiles had experienced chemical alteration due to the enrichments of trace elements abundant in human tissues.

• Journal of the Korea Concrete Institute
• /
• v.23 no.4
• /
• pp.511-520
• /
• 2011

Recent studies to improve reinforcement of structures have developed stiff type Polyurea by using highly polymized compound Polyurea, but the reinforcing effect of it appears to be merely good. To find the proper usage of Polyurea as structural reinforcement, stiff type Polyurea has developed by manipulating the ratio of the components that consist flexural type Polyurea and the developed stiff type Polyurea shows higher hardness and tensile capacity. The reinforcement effect evaluation of has been performed by the polyurea applied RC slab specimens, and the reinforcement effect of the combination of fiber sheet and polyurea has been tested. The results shows that the Polyurea applied specimens have significant improvement on hardness and ductility compare to those of unreinforced. Also, the specimens that stiff type Polyurea is sprayed on fiber sheet reinforcement has higher reinforcing effect than only sheet reinforced specimens. However, the specimens that and fiber sheet attached after polyurea applied on showed that the high toughness of fiber sheet restrains the ductile behavior of Polyurea due to the high ductility, thereby the specimen suffers the concentration of load, which leads the brittle fracture behavior.

• Korean Journal of Food Science and Technology
• /
• v.39 no.4
• /
• pp.412-418
• /
• 2007

The physicochemical properties and mixograph characteristics of soft white winter (SWW) and club wheat, as well as their product potentiality, were investigated. There were no significant differences between the SWW wheat and club wheat regarding their Single Kernel Characterization System (SKCS) properties. The straight-grade flour yield, break flour yield, ash content, and milling score of the SWW wheat were similar to those of the club wheat, and the straight-grade flour yield had a significant positive correlation to the break flour yield (r = 0.805**). The Rapid Visco-Analyzer (RVA) peak viscosity and swelling volume of the SWW wheat flour were very similar to those of the club wheat flour, and there was a significant positive correlation between the RVA peak viscosity and the swelling volume (r = 0.662**). The average mixograph absorption of the SWW wheat was higher than that of the club wheat. The club wheat resulted in a higher cookie diameter than the SWW wheat, but the difference was not significant. The sponge cake volume using the SWW wheat flour was higher than that with the club wheat flour. In addition, there was a significant correlation between the cookie diameter and the sponge cake volume (r = 0.745**).

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.23 no.2
• /
• pp.133-140
• /
• 1978

Kernel softness. density. size and 100 kernel weight of Korean local corn lines (Zea mays, 1.) were studied to find any relationship with cultural magnitude in regions. Kernel density. softness and size were greater in the Kangwon area than in other less growing areas. Kernel size was the only character showing great relationship with growing magnitude. Most of the collected lines were flinty type and no differences were found among various growing magnitudes. Kernel density was also the same through the growing magnitudes.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1466-1469
• /
• 2004

Micro spherical lens mold processing method based on mechanical one completes a spherical shape by setting a diamond tool of hundreds $\mu$m radius on spins with high speed and then using Z-axis vertical feeding motion like the fabrication of micro drilling. In this method, we can see unprocessed parts shaped like cylinder and cone and check increasing chatter marks and burrs by setting errors of the central axis of rotation on the edge of the tool. That is why this method doesn't suit for the optical lens mold. In this paper presents unprocessed parts are disappeared and chatter marks and burrs are decreased from centre of the lens after using Run-out measuring and setting system on run-out occurred from setting tool. Also the fabrication characteristics of 6：4 Brass, A1601, PMMA are compared and analyzed, establishing the optimum machining condition on each material.