• Membrane Journal
• /
• v.24 no.1
• /
• pp.20-30
• /
• 2014

A membrane-coupled sequencing batch reactor (MSBR) was used for the advanced treatment of rural village sewage which is very low C/N ratio. The effect of powdered activated carbon, aeration rate, and external organic material loadings on the treatment efficiency and filtration performance were investigated in sequencing batch reactor, in which a flat-sheet type microfiltration membrane with a pore size of $0.4{\mu}m$ was submerged. At the initial operation (within 54 days) MLSS concentration, and the removal efficiencies of COD, T-N, and T-P were increased with the increase of C/N ratio. After 89 days the removal efficiencies of COD, T-N, and T-P were 97.1%, 75.0%, and 48.3%, respectively. Suspended solid-free effluent was obtained by membrane filtration. The T-P removal was relatively low because of depending on the amount of excess sludge wasting. During the operation of MSBR with powdered activated carbon, the particle size of the sludge reduced by the increase of collision frequency and mixing intensity. In comparison with MSBR without powdered activated carbon, TMP of MSBR with that was significantly elevated.

• Korean Journal of Food Science and Technology
• /
• v.36 no.1
• /
• pp.111-115
• /
• 2004

Reuterin production efficiency of Lactobacillus reuteri, which converts glycerol into reuterin (antimicrobial substance) under anaerobic condition, was examined. When compared at $32,\;37,\;and\;42^{\circ}C$, production rate and total amount produced increased with increasing incubation temperature. Reuterin production terminated earlier at $42^{\circ}C$ than at $32\;and\;37^{\circ}C$. Presence of various amino acids in the reaction mixture generally decreased reuterin production, whereas proline did not inhibit reuterin production. A continuous-type reactor in which glycerol was passed through the chamber containing L. reuteri cells produced greater amount of reuterin than when batch-type process was used.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.7
• /
• pp.700-704
• /
• 2008

Nitrite and free ammonia have been known as substrate inhibitors in anaerobic ammonium oxidation. To reduce inhibitory effect of these substrates, the NH$_3$-N/NO$_2$-N ratio in the influent could be properly controlled in anaerobic ammonium oxidation process. Five kinds of NH$_3$-N/NO$_2$-N ratio were assayed in batch to find optimum NH$_3$-N/NO$_2$-N ratio, curtailing substrate inhibition. As the results of batch test, the highest T-N removal efficiency of 88% was obtained at 1.00 : 1.30 of NH$_3$-N/NO$_2$-N ratio. In addition, rate constants for ammonium and nitrite in zero-order kinetics were found to be the highest values as 7.66 mg/L$\cdot$hr and 11.89 mg/L$\cdot$hr at 1.00 : 1.30 ratio, respectively. However, as for the specific anammox activity, the ratio of NH$_3$-N/NO$_2$-N ratio was recommended as 1 : 1.15 which can maintain the highest SAA during continuous operation and preclude the accumulation of nitrite in the reactor.

• KSBB Journal
• /
• v.5 no.2
• /
• pp.167-173
• /
• 1990

This study is to investigate for obtaining the operating conditions of continuous vinegar production using fluidized bed reactor by Acetobacter aceti cell immobilized in Ca-alginate gel. The optimum conditions obtaining by batch fermentation using fluidized bed reactor were as follows; The fermentation temperature and aeration rate were 3$0^{\circ}C$ and 1.0VVM and the initial concentration of ethanol and acetic acid in medium were 33g/l and 27g/l respectively. The amount of bead used was 25%(w/v). The overall acetic acid productivities of batch fermentations by free cell and immobilized cell were 0.31g/l-hr and 0.48g/l-hr, respectively, at the final acetic acid concentration of 50g/l. In the continuous vinegar production using fluidized bed reactor by immobilized cell under optimum conditions, it was possible to produce 23g/l acetic acid continuously up to 90 days with maximum acetic acid productivity of 2.76g/l-hr at dilution rate 0.12hr-1.

• Clean Technology
• /
• v.4 no.1
• /
• pp.45-59
• /
• 1998

Continuous immobilized-cell culture was carried out for the production of kasugamycin, a secondary metabolite by a filamentous bacteria, Streptomyces kasugaensis, with an intention of reducing waste generation. A sporulation medium was developed for production of bulk amounts of spores, and the spores were entrapped into celite biosupports for immobilization. It was possible to effectively keep the immobilized-cells inside the reactor during the continuous culture by an efficient immobilized cell separator of decantor type on the outlet of the fermentor. Using this continuous immobilized-cell fermentor system, we investigated the effects of feed substrate and phosphate concentrations on kasugamycin production and chemical oxygen demand(COD). Comparing with the conventional suspended-cell batch culture, the kasugamycin productivity was observed to increase by 2.5 times, whereas COD per unit kasugamycin production decreased by 2.3 times in the continuous immobilized-cell culture. Based on these results, the continuous immobilized-cell system was considered to be a cleaner bioprocess than the conventional batch suspended-cell system.

• KSBB Journal
• /
• v.6 no.3
• /
• pp.309-319
• /
• 1991

A continuous stirred tank membrane reactor(CSTMR ) was developed and optimized for the production of cod skin gelatin hydrolyzates using endo-protease Alcalase. A experimental design methodology was used to optimize the four performance variables: enzyme concentration, substrate concentration, permeate flux and reactor volume. All four variables studied had an effect on substrate conversion, with enzyme and substrate concentrations being predominant. Conversion increased with the increase in enzyme concentration, with the decrease in substrate concentration, at high volumes and low flux. A strong interaction was observed between enzyme and substrate concentrations and smaller interactions between enzyme and flux and substrate and flux. The optimum operating conditions for the CSTMR process for an initial substrate concentration for 10% were $50^{\circ}C$, pH 8, flux 7.3ml/min, residence time 82 min, and Alcalase to substrate ratio 0.02(w/w). A gradual decay in reactor activity during 8 hrs was 2.1% conversion/hr. Enzyme leakage through the 10, 000 MWCO membrane was 16% at $50^{\circ}C$ and 12% at $35^{\circ}C$, 6hrs. However, there was no apparent correlation between enayme leakage and substrate conversion. The Km value for the CSTMR was 20 times higher than the batch reactor. The productivity(expressed as mg product/mg enzyme) of the CSTMR was more than six fold higher than the batch at $50^{\circ}C$. The hydrolyzate was non-bitter.

• Korean Journal of Food Science and Technology
• /
• v.29 no.5
• /
• pp.969-973
• /
• 1997

In order to produce transglucosylated steviosides continuously, some types of bioreactors were investigated with cyclodextrin glucanotransferase immobilized on a high porous anion exchange resin, Diaion HPA75. Among the bioreactors, the packed-bed reactor (PBR) showed the highest specific productivity. The effect of linear velocity in a PBR on the stevioside conversion was not significant in the range of $10{\sim}60\;cm/hr$ at the same space velocity of $1.2\;hr^(-1)$. When the space velocity of bioreactor was varied from 0.2 to $1.1\;hr^{-1}$, the optimal velocity of substrate solution was determined as $0.7\;hr^(-1)$. The stevioside conversion of more than 70% was maintained during 20 days in the continuous operation, if about 20% of immobilized enzyme was replaced in the top of reactor after two weeks operation as the one of the control methods in bioreactor. The specific production, which refers to as the amount of commercially valuable transglucosylated steviosides produced by a unit amount of immobilized cyclodextrin glucanotransferase, was found to be ca. 150g product/g immobilized enzyme.

• Korean Chemical Engineering Research
• /
• v.45 no.4
• /
• pp.396-399
• /
• 2007

Organic residue and carbonized solid producing from the thermal degradation gave a influence on oil conversion, formation of styrene and side products such as ${\alpha}-methyl$ styrene, ethyl benzene, dimer. Thus, new reaction system using wetted-wall type reactor was proposed and examined on influence of various parameters such as reaction temperature, feeding rate and removal velocity of formed vapor. Optimum condition were obtained from continuous thermal degradation using wetted-wall type reactor and styrene was continuously obtained as the yield up 65%.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.5
• /
• pp.939-947
• /
• 2000

Enhanced biological phosphorus removal (EBPR) was performed in an anaerobic/aerobic sequencing batch reactor (SBR). Influent was a synthetic wastewater based on acetate as a carbon source. The sludge age and hydraulic retention time were kept at 10 days and 16 hrs, respectively, Phosphate release during the anaerobic period and phosphate uptake in aerobic period were increased gradually with time. and after about 200 days, steady-state operation could be achieved with complete removal of influent phosphate. Number distribution of microbial community in the sludge performing EBPR was investigated during the steady state operation. 17 rRNA targeted oligonucleotide probes were designed and slot hybridization technique was used to determine the number distribution of each microorganism. In the acetate fed SBR, rRNA belonging to the beta subclass of proteobacteria was the most dominant in total rRNA and rRNA matching to CTE probe was the second, rRNAs of Acinetobacter, Aeromonas and Pseudomonas, which are usually thought as phosphorus accumulating organisms in EBPR processes, constituted less than 10% of total rRNA. From this community analysis, it was inferred that microorganisms belong to the beta subclass of proteobacteia (BET) and CTE such as Rhodocyclus group were important in biological phosphorus removal. Therefore, the role of Acinetobacter, Aeromonas and Pseudomonas in the EBPR might have been overestimated.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.23 no.2
• /
• pp.322-327
• /
• 1994

For the improvement of L-lysine productivity, development of the continuous fermentation system by a bioreactor assembly was attempted. Primarily, optimal conditions on the whole cell immobilization of Corynebacterium glutamicum ATCC21514 were studied and 76.2% of immobilization ratio was obtained when the cells were entrapped with 4% k-carrageenan showing 4.0kg gel strength. A bioreactor system was set up using the immobilized cells was applied for the continuous production of L-lysine. The results obtained under the optimum conditions were compared with those of the batchwise fermentation. Experimental results obtained from 14 day continuous fermentation showed 36.7% of sugar conversion to L-lysine while the productivity of L-lysine was disclosed as 4.96mg/ml mg-dry cell weight /hr which is 2.5times and 4.1 times higher than those of the batchwise fermentation by the intact cells and by the immobilized cells, respectively.