• Title/Summary/Keyword: 연속화공법

Search Result 4, Processing Time 0.023 seconds

A Study on the Continuation Effect of the PC Beam Bridge Reinforced by Span-Jointing of Slab (PC Beam 교의 슬래브 연속화 보강 효과에 대한 연구)

  • Sun, Chang-Ho;Lee, Jong-Seok;Kim, Ick-Hyun
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.6 no.4
    • /
    • pp.225-232
    • /
    • 2002
  • Recently the slab span-jointing method has been employed as one of the retrofit technologies to enhance the capacity of existing simple beam bridges in many cases. In general this method makes simple beam bridges behave like multi-span continuous bridges under service loads excluding self weight in company with external prestress force method in the field. In this paper the continuation effect has been studied for the retrofitted bridges by the experimental and numerical approaches. The results show that the deflections and stresses of members are reduced due to the increase of the total stiffness of bridge system and the efficiency of bridge continuation based on the slab span-jointing method is about 40 % when comparing with the case of continuous bridges.

Optimization of MOF-801 Synthesis Using Sequential Design of Experiments (순차적 실험계획법을 이용한 MOF-801 합성공정 최적화)

  • Lee, Min Hyung;Yoo, Kye Sang
    • Applied Chemistry for Engineering
    • /
    • v.32 no.6
    • /
    • pp.621-626
    • /
    • 2021
  • A sequential design of experiments was used to optimize MOF-801 synthesis process. For the initial screening, a general 2k factorial design was selected followed by the central composition design, one of the response surface methods. A 23 factorial design based on the molar ratio of fumaric acid, dimethylformamide (DMF), and formic acid was performed to select the more suitable response variable for the design of experimental method among the crystallinity and BET specific surface area of MOF-801. After performing 8 synthesis experiments designed by MINITAB 19 software, the characteristic analysis was performed using XRD analysis and nitrogen adsorption method. The crystallinity with R2 = 0.999 was found to be more suitable for the experimental method than that of BET specific surface area. Based on analysis of variance (ANOVA), it was confirmed that the molar ratio of fumaric acid and formic acid was a major factor in determining the crystallinity of MOF-801. Through the response optimization and contour plot of two factors, the optimal molar ratio of ZrOCl2·8H2O : fumaric acid : DMF : formic acid was 1 : 1 : 39 : 35. In order to optimize the synthesis process, the central composition design on synthesis time and temperature was performed under the identical molar ratio of precursors. The results derived through the designed 9 synthesis experiments were calculated using the quadratic model equation. Thus, the maximum crystallinity of MOF-801 predicted under the synthesis time and temperature of 7.8 h and 123 ℃, respectively.

Control of Prestressing Forces in a Splicing Method using the Partial Post-tensioning and Releasing Procedure (부분 긴장과 해제를 이용한 연속화 과정에서의 긴장력 조절)

  • 이환우;김광양
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • v.15 no.2
    • /
    • pp.251-259
    • /
    • 2002
  • A new splicing technique by the secondary moment which is intentionally induced by the tensioning effect of continuous tendons and the releasing effect of temporary beam tendons was developed. The tensioning and releasing works are essential and the decisions of the magnitude and order about them may be important engineering problems in this technique. In this paper, it was studied lot the practically optimum procedure of the tensioning and releasing works. As the result, it is concluded that the gradual progress through the three stages is reasonable for the procedure and the tensioning work have to precede the releasing work. Additionally, the magnitude of preceding tensioning force should be obtained by the sensitivity analysis and the minimum limit is more critical than the minimum limit.

Study on Dipping method of Knit-CPB process (침지방법에 따른 니트 CPB소재의 염색성비교 연구)

  • Lee, Jung-Ho;Lee, In-Yeol;Kim, Seung-Ho;Kim, Moon-Jung;Hwang, Chang-Soon;Cha, Yong-Ho
    • Proceedings of the Korean Society of Dyers and Finishers Conference
    • /
    • 2012.03a
    • /
    • pp.93-93
    • /
    • 2012
  • 섬유산업은 그 제조 스트림이 높은 오염 부하와 에너지 다소비를 특징으로 하여 환경규제에 따라 기존 시장의 위축 가능성이 상존하고 있다. 특히 섬유산업의 주요 스트림 중의 하나인 염색가공 공정은 섬유에서 불순물을 제거하고 심미한 색상과 사용 목적에 적합한 성능을 부여하는 단계로 섬유제조 공정에서 가장 높은 부가가치를 부여하는 단계이나 고온의 물과 다양한 화공약품을 많이 사용하고 그 처리온도가 비교적 높아($100^{\circ}C$ 이상) 대표적인 폐수 발생 공정이자 에너지 다소비 공정이다. 섬유의 염색 방법 중 반연속방법인 CPB(Cold Pad Batch)염색은 반응성 염료와 알칼리의 혼합액으로 구성된 염액에 원단을 패딩한 후 상온에서 수 시간 배칭하고 수세 및 후처리하여 염색하는 방법으로 작업공정관리, 설비관리가 간편하고 에너지소비량 절감, 높은 생산성의 장점이 있다. CPB염색법은 주로 직물에 적용되어 보편화 되었으며, 작업공정 중 장력의 영향을 많이 받는 니트 소재에 적용되는 사례는 드물다. 직물류의 CPB 염색가공법은 대구 경북을 중심으로 연구진행이 활발히 이루어지고 있어 국내 100대 정도의 CPB 관련 장비가 직물제품에 한정되어 가동되고 있는 반면, 니트 CPB 관련 염색 가공 업체는 1곳에 불과한 실정이나 니트류에 대한 지속적인 수요 증가를 고려하면 니트 소재에 대한 CPB염색 적용은 시의적절한 필수요소라고 판단된다. 니트 소재에 대한 CPB염색가공 적용 시 나타나는 문제점은 작업원단의 변부 말림현상 발생, 전폭 상태에서의 색상차이인 listing현상, 원단의 첫도입부분과 끝부분의 색상차이인 tailing현상이며, 반복되는 작업 시 염색재현성을 확보하는 것으로 나타난다. 본 연구에서는 CPB염색 시 CPB Head 장치의 Padding 방식 즉, trough와 Nip type에 따른 염색 시 알칼리와 염료 투입에 따른 염색 재현성(Build up, Ending, 알칼리 안정성)을 비교해 보았으며, 이에 따른 염색제품의 물성 및 견뢰도를 확인하여 보다 효율적인 방식을 선별하였다.

  • PDF