• Title/Summary/Keyword: 연속형 센서

Search Result 72, Processing Time 0.025 seconds

Fabrication of Auto-replacable Micro Dissolved Oxygen Sensor Array (자동 교체형 초소형 용존 산소량 측정 센서 어레이의 제작)

  • Lee, Hyun-jin;Park, Jae-Hyoung;Lee, Seung-Ki
    • Proceedings of the KIEE Conference
    • /
    • 2015.07a
    • /
    • pp.1217-1218
    • /
    • 2015
  • 용존 산소 센서는 하천과 연안으로 유입되는 오염원을 측정하는 곳에 사용되고 있다. 상용화되고 있는 용존 산소 센서는 멤브레인의 부유물 점착 및 전해질 변질로 인해 수명이 단축되는 문제점이 있다. 본 연구팀에서는 수명 문제를 해결하기 위해 실시간 연속 측정이 가능한 자동 교체형 초소형 용존 산소 센서를 개발하고자 한다.

  • PDF

Damage Detection of Plate Using Long Continuous Sensor and Wave Propagation (연속형 센서와 웨이브 전파를 이용한 판 구조물의 손상감지)

  • Lee, Jong-Won
    • Transactions of the Korean Society for Noise and Vibration Engineering
    • /
    • v.20 no.3
    • /
    • pp.272-278
    • /
    • 2010
  • A method for damage detection in a plate structure is presented based on strain waves that are generated by impact or damage in the structure. Strain responses from continuous sensors, which are long ribbon-like sensors made from piezoceramic fibers or other materials, were used with a neural network technique to estimate the damage location. The continuous sensor uses only a small number of channels of data acquisition and can cover large areas of the structure. A grid type structural neural system composed of the continuous sensors was developed for effective damage localization in a plate structure. The ratios of maximum strains and arrival times of the maximum strains obtained from the continuous sensors were used as input data to a neural network. Simulated damage localizations on a plate were carried out and the identified damage locations agreed reasonably well with the exact damage locations.

Amplification of Fiber Optic BOTDA Sensor Pulsed Signal Using Erbium-doped Fiber Amplifier (광섬유증폭기를 이용한 광섬유 BOTDA센서의 펄스신호 증폭특성)

  • 박형준;고광락;권일범
    • Proceedings of the Optical Society of Korea Conference
    • /
    • 2003.02a
    • /
    • pp.330-331
    • /
    • 2003
  • 분포형 광섬유 센서시스템은 일정한 길이의 연속적인 광섬유 및 광케이블을 매질로 하여 길이 방향에서 생기는 투과율 또는 산란 특성의 변화를 통해 물리량의 변화와 그 위치를 감지하는 시스템을 말한다. 그 중에서 광섬유 내부의 브릴루앙 산란효과를 이용하여 광케이블 주위에 진동, 압력등에 매우 민감한 분포형 광섬유센서를 구성하고 외부로부터의 침입 유무와 위치를 파악함과 동시에 주요시설물의 감시 및 진단이 가능하도록 한다. (중략)

  • PDF

An Intelligent Sensor Network Middleware supporting Zone-control function (Zone-Control기능을 지원하는 지능형 센서네트워크 미들웨어)

  • 이지현;임경식
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2004.10c
    • /
    • pp.628-630
    • /
    • 2004
  • 센서네트워크 미들웨어는 에너지 사용에 제약을 가지는 센서네트워크의 요구사항과 다양한 서비스 제공을 위한 응용서비스의 확장성을 고려하여 센서네트워크와 응용서비스가 상호 분리되어 각각의 기능을 수행하도록 설계되어야 한다. 따라서 본 논문에서는 Zigbee기반의 센서네트워크를 구성하여 센서들의 에너지 사용을 최소화함으로써 센서네트워크의 효율성을 증대시키고. 응용 서비스의 독립된 수행과 Zone을 통한 응용서비스의 지역적인 제공이 가능한 지능형 센서네트워크 미들웨어를 제안한다. 제안된 센서네트워크 미들웨어에서는 특정 센서로부터 전달된 내용을 Context-aware과정을 통하여 다른 기능을 가진 센서들의 연속적인 센싱을 유도하고, Zone Manager를 통하여 효과적인 서비스의 지역적인 제공 기능을 수행한다.

  • PDF

Assessment of Cutting Performance Using AE Sensor in Turning (선삭에서 AE센서를 이용한 절삭성 평가)

  • Choi, Won-Sik
    • Journal of Sensor Science and Technology
    • /
    • v.8 no.6
    • /
    • pp.469-475
    • /
    • 1999
  • The chips may be produced in the form of either broken chips or unbroken chips in turning process. The unbroken chips are dangerous to the operator and difficult to handle at high speed machining. The signal of Acoustic Emission is related to cutting conditions, tool materials, test conditions and tool geometry in turning. The relationship between AE signal and chip formation was experimentally investigated. The experimental results show that two types of chip formations are possible to classify from the statistical analysis of the amplitude of AE signal. The AE-sensor could be used to monitor the chip condition in turning.

  • PDF

A Sensorless Control at Low Speed of Interior Permanent Magnet Synchronous Motor for Railway Traction Motors (철도차량용 매입형 영구자석 동기전동기의 저속영역 센서리스 제어)

  • Kang, Byeong-Gyu;Jeong, Shin-Myung;Lee, Kyo-Beum
    • Proceedings of the KIPE Conference
    • /
    • 2017.11a
    • /
    • pp.67-69
    • /
    • 2017
  • 본 논문에서는 철도차량용 매입형 영구자석 동기전동기의 저속영역에서 구동을 위해 센서리스 제어 기법을 적용하였다. 저속영역에서 센서리스 제어는 회전하는 전동기에 연속적인 고주파 신호를 인가하고 그 신호에 대한 응답을 이용한다. 매입형 영구자석 동기전동기의 회전자 인덕턴스 변화와 자기적 돌극성을 이용하므로 특정 전동기에 대해 우수한 성능을 나타낸다. 따라서 본 논문에서는 동기좌표계 d축 전압에 정현파 신호와 구형파 신호를 주입하여 두 방식에 대한 결과를 시뮬레이션을 통해 분석하였다.

  • PDF

Ad-hoc Query Processing in a Wireless Sensor Network (무선 센서 네트워크에서 순간 질의 처리 방법)

  • Yun, Sang-Hun;Cho, Haeng-Rae
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.32 no.11B
    • /
    • pp.685-692
    • /
    • 2007
  • Recent advances in wireless communications and electronics have enabled the development of low-cost, low-power, multi-functional sensors. A typical wireless sensor network (WSN) consists of a large number of sensor nodes that can measure and process data while communicating through wireless channels. In this paper, we propose a hybrid query processing (HQP) algorithm for user queries submitted to the WSN. Unlike previous algorithms that consider continuous queries only, HQP supports both continuous queries and ad-hoc queries. Specially. HQP tries to reduce energy consumption of ad-hoc queries by using query results cached at each sensor node which are created during the execution of the previous continuous query. HQP can also exploit a trade-off between energy consumption and data accuracy. We evaluate the performance of HQP under a variety of WSN configurations.

The study on configuration method for active train position (능동형 열차위치검지장치 구성방안 연구)

  • Shin, Kyung-Ho;Jung, Eui-Jin;Lee, Jun-Ho
    • Proceedings of the KIEE Conference
    • /
    • 2006.07b
    • /
    • pp.1128-1129
    • /
    • 2006
  • 열차의 위치를 검지하는 방식으로 널리 사용되고 있는 방식은 궤도회로를 이용하는 방식으로 간단한 구성과 신뢰성이 높은 장점이 있다. 하지만 설치 및 유지보수에 많은 비용의 발생 및 고정폐색방식으로 인한 연속적인 열차의 위치검지가 불가능하다. 궤도회로를 이용한 열차의 위치검지는 지상장치를 통하여 지상 센터에서만 열차위치의 파악이 가능하므로 이러한 방식의 위치검지는 수동형의 열차위치검지라 할 수 있다. 이에 반해 능동형 열차위치검지는 차상에서 열차의 위치를 검지하여 전방 및 후방열차, 지상센터 간 통신을 통한 해당 열차의 위치정보를 교환하는 방식이며 연속적인 열차위치의 검지가 가능하다. 하지만 궤도회로와 같은 수준의 신뢰성을 가지는 장치구성이 필요하다. 본 논문에서는 신뢰성 향상을 위하여 여러가지 센서들을 통합한 능동형 열차위치검지장치의 구성방안과 운영시나리오를 제안하고, 장단점을 분석한다.

  • PDF

Development of Low-Power CO Gas Sensor (저전력 CO 가스센서 개발)

  • Cha, Sung-Ik;Shin, Paik-Kyun;Lee, Boong-Joo;Kim, Jong-Won;Gang, Moon-Sik;Min, Nam-Ki
    • Proceedings of the KIEE Conference
    • /
    • 2003.07c
    • /
    • pp.1410-1412
    • /
    • 2003
  • PTC 자기발열기판을 사용해서 저전력 방폭형 CO센서를 제작하고 그 특성을 고찰하였다. CO가스센서의 감지특성을 향상시키기 위하여 Pt가 island 형상을 갖는 다층 Pt/$SnO_2$ 박막구조를 도입하였으며, 이와 같은 구조는 Pt/$SnO_2$ 위에 다시 $SnO_2$ 및 Pt cluster 층들을 연속적으로 증착함으로서 제작되었다. 200ppm의 CO가스농도에서 측정된 다층 $Pt/SnO_2$박막 센서의 감도는 1.72($R_{air}/R_{CO}$)로, 단충 Pt/$SnO_2$ 박막 센서의 최대감도(1.23)보다 훨씬 더 높았다 이것은 Pt와 $SnO_2$사이의 계면적 증대에 기인하는 것으로 생각된다. 제작된 Pt/$SnO_2$ 가스센서의 평균 소비전력은 38.5mW이며, 측정농도범위($30{\sim}1,000ppm$)에서 매우 양호한 감지특성을 나타내었다.

  • PDF

Implementation of a Mobile Sensor Device Capable of Recognizing User Activities (사용자 움직임 인식이 가능한 휴대형 센서 디바이스 구현)

  • Ahn, Jin-Ho;Park, Se-Jun;Hong, Eu-Gene;Kim, Ig-Jae;Kim, Hyoung-Gon
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.46 no.10
    • /
    • pp.40-45
    • /
    • 2009
  • In this paper, we introduce a mobile-type tiny sensor device that can classify the activities of daily living based on the state-dependent motion analysis using a 3-axial accelerometer in real-time. The device consists of an accelerometer, GPS module, 32bit micro-controller for sensor data processing and activity classification, and a bluetooth module for wireless data communication. The size of device is 50*47*14(mm) and lasts about 10 hours in operation-mode and 160 hours in stand-by mode. Up to now, the device can recognize three user activities ("Upright", "Running", "Walking") based on the decision tree. This tree is constructed by the pre-learning process to activities of subjects. The accuracy rate of recognizing activities is over 90% for various subjects.