• Journal of Bio-Environment Control
• /
• v.9 no.1
• /
• pp.11-19
• /
• 2000

In recent, multi-sector nutriculture in which each sectors are managed with different compositions and supplying amounts of nutrient solution is being prevalent especially in large-scale greenhouses. This study was carried out to develop an automatic mixing and supplying system of nutrient solution for the multi-sector greenhouse which can control various compositions of nutrient solution and supplying amounts for each sector. The stock solution control device could control discharge of the stock solution with device actuating time. The experimental result showed high correlation between the discharge and the actuating time. The system could make nutrient solution of various compositions and showed possibility of changing compositions of nutrient solution according to changes of growth stages or environments. Undesirable remnant nutrient-solution effect on the next supply was decreased by lowering RC of the previous nutrient solution remaining in the tank and supply pipe through rinse process. To evaluate performance of the developed system, experiments that compare N $O_3$$^{[-10]}$ , and P $O_4$$^{3-}$ concentrations of nutrient solution made in laboratory level with those made by the developed system were conducted. The experimental results showed that the deviations for N $O_3$$^{[-10]}$ , and P $O_4$$^{3-}$ concentrations of nutrient solution composited by the developed system were -2.36％ and -5.15％, respectively.

• Journal of Korean Society of Forest Science
• /
• v.82 no.3
• /
• pp.227-234
• /
• 1993

This study was carried out to seek for a most effective hastening method of seed germination by Pon-Pon treatment and asexual multiplication method by cutting in Zanthozylum piperitum. The results obtained in this study were as follows : 1. Cold moist stratification under the ground accompanied with Pon-Pon treatment was shown 74.3% of seed germination, which was the most effective one among pretreatment methods with significance at 1% level. 2. Height growth was shown continuous growth pattern and the maximum growth was shown during the period 1 July to 31 July, which corresponds 40.3% of total annual growth. 3. Although no noticeable difference among the kind of plant growth regulator in the rooting rate, there was difference among concentrations with significance at 1% level. 4. In the case of number of primary roots and T/R rate of rooted cuttings, treatment of plant growth regulators was significantly superior to control. 5. T/R rate in rooted cuttings was a high negative correlation (r=-0.7164) with the number of primary roots.

• Resources Recycling
• /
• v.25 no.2
• /
• pp.33-41
• /
• 2016

A scale up tests (380 kg/day) using a continuous solvent extraction and electro-winning system was carried out to separate and recover cobalt from a solution containing 1.91 g/L Co and 14.65 g/L Ni. The solution was obtained during a process including solvent extraction and precipitation stages for removal of Cu and Fe from a synthetic sulfuric acid solution of manganese nodule matte. The optimal condition for solvent extraction was : solvent concentration of 0.22M Na-Cyanex 272 (45% saponified with NaOH) and O:A phase ratios of 1:1.5, 10:1 and 1.5:1 used in extraction, scrubbing and stripping stages, respectively. The extraction and stripping efficiencies were found to be 99.8% and 99.88%, respectively. The stripped solution contained 40.27 g/L Co with 4 ppm Ni. Cobalt metal of 99.963% purity was yielded with current efficiency of 67% and current density of $0.563A/dm^2$ during the electro-winning process.

• Journal of Korea Soil Environment Society
• /
• v.4 no.2
• /
• pp.11-31
• /
• 1999

Removal of hexavalent chromium from artificial groundwater (AGW) by granular activated carbon (GAC) was investigated in batch and continuous-flow column studies. Experimental parameters that were examined included solution pH, presence of dissolved oxygen (DO), and GAC pretreatment with Fe(II). As the solution pH increased from 4 to 7.5, the amount of Cr(VI) removed by both GACs decreased significantly. Exclusion of DO from the experimental systems resulted in greater removal of Cr(VI) from solution, possibly as a result of reduction to Cr(III). However, pretreatment of the GAC with a reductant (Fe(II)) did not improve Cr(VI) removal. Equilibration With 0.01 M $K_2$$HPO_4$[to extract adsorbed Cr(VI)] followed by a wash with 0.02 N $K_2$$HPO_4$[to remove precipitated/sorbed Cr(III)] proved to be a viable approach for the regeneration of carbons whose Cr(VI) removal capacities had been exhausted. The performance of the regenerated carbons exceeded that of the virgin carbons, primarily because of the favorable adsorption of Cr(VI) at lower pH values and the reduction of Cr(VI) to Cr(III), The presence of Cr(III) in acid wash solutions provides direct evidence that Cr(VI) is reduced to Cr(III) in GAC systems under relatively acidic conditions. GAC performance over five complete cycles was consistently high, which suggests that such a system will be able to function over many operation cycles without deleterious effects.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.296-300
• /
• 2007

우리나라에 내리는 대부분의 강수량은 6월${\sim}$8월의 장마기간 혹은 태풍의 영향으로 인해 발생한다. 특히 국지적으로 발생하는 집중호우로 인해 많은 인명, 재산 피해 등이 발생한다. 우리나라에서 집중호우로 인한 피해는 거의 매년 발생하고 있으며, 집중호우의 발생 지역은 특정 지역에 국한되어 있지 않다. 따라서 집중호우 발생으로 인한 피해 방지를 위해 사전에 충분한 준비를 해야 한다. 2006년 7월 8일부터 10일까지 3일 동안 진주지역 306.5mm, 합천지역 259.5mm, 산청지역 366.0mm의 집중호우가 발생하였으며, 이 기간 동안 이들 지역 외에도 전국적으로 태풍 에위니아(EWINIAR)의 영향으로 많은 호우가 발생하였다. 본 연구에서는 2006년 7월 진주지역 집중호우 특성 연구를 위해 진주지역 시강우 자료를 이용하여 자료를 분석하였다. 시강우 자료를 이용하여 진주지역 재현기간별 확률강우량을 산정하였고 2006년 7월 8일부터 10일까지의 강우분포형태를 설계강우분포형과 비교하였다. 또한 2006년 7월 발생했던 진주지역 집중호우의 무차원 누가곡선을 작성하여 분석을 실시하였다. 분석 결과 일최대 강우량의 경우 그 크기가 50년 혹은 80년 이내였으며, 강우분포형의 경우 하천정비기본계획의 경우 Mononobe 중앙집중형이였지만, 지난 호우의 경우 후방위의 강우가 연속적으로 발생한 형태였다. 또한 대부분의 강우가 6시간 이내에 내려 첨두홍수 발생에 많은 영향을 미쳤을 것으로 판단된다. 앞으로 이상기후와 같은 자연 현상에 대비하기 위해서는 단시간 호우에 대한 정확한 분석과 강우분포에 대한 연구가 더욱 필요할 것으로 생각된다.적자색의 미려한 결정이 석출되므로 이 결정을 여과하여 ethanol로 세척하고 진공 desiccator중에서 건조시켰다. 수득량 1.2~1.3g.)와의 조환가는 11.9565의 상인연소현상을 보였다. 삭과색(Y) 경색(R) 유전자간에는 어느것이나 연소현상이 보이지 않았다. 4. 단일반응성의 변이는 연소적이며 우성은 거의 인정되지 않았고 인자간의 상호작용도 인정되지 않았으며 상가적 유전을 보였다. 광의와 협의의 유전력은 각각 89.50%로서 실용적으로 대단히 높은 것으로 생각되었으며 단일반응성에 관여하는 유전자수는 2대의 인자로 추정하였고 다시 양친의 유전자형을 aabb AABB라고 측정하여 각인자의 작용가는 11.136일로 산출되었고 분해법에 의한 유전분석결과 유전자형의 관찰빈도분포와 이론빈도분포는 서로 잘 적합되었다. 단일반응성에 있어서 유전력이 대단히 높았으므로 비교적 초기세대에서 본 형질의 선발이 가능할 것 같았다. 5. 단일반응성과 엽형 및 엽병색 유전자와의 사이에 $F_2$, $BC_1$ 및 $BC_2$에서 각각 유의적인 상관관계를 볼 수 있었으므로 이들 형질간에 연소가 있는 것으로 인정되었다. 더욱 엽형과 엽병색과의 연소가 있는 것으로 인정되는 이상단일반응성 유전자와의 사이에 연소군이 인정된다. 6. 섬유중 유전자와 엽병색 및 엽형유전자와의 사이에 $F_2$$BC_1$ 및 $BC_2$에서 각각 유의적 상관관계를 볼 수 있었으므로 이를 형질간에 연소가 있는 것으로 인정되었다. 더욱 엽형과 엽병색과의 연소가 있는 것으로 인정되는 이상 섬유중 유전

• Journal of Veterinary Clinics
• /
• v.31 no.5
• /
• pp.371-375
• /
• 2014

This article describes the use of laparoscopic-assisted cystoscopy for removal of urinary calculi in five dogs. All dogs had micturition disorder due to urinary calculi. The surgical technique used was same in all cases. A urethral catheter passed into the urinary bladder through the urethra preoperatively. A 5-mm diameter cannula was placed in the ventral midline, 1 to 2 cm cranial to the umbilicus, and the 5-mm laparoscope was introduced via the cannula. A 10-mm diameter cannula was placed adjacent to the apex of the bladder under the visual guidance of laparoscopy. The bladder was then partially exteriorized through the 10-mm portal site, and a stab incision was performed on the bladder wall. The incisional margin of the bladder was sutured to the skin of the second portal site in $360^{\circ}$ simple continuous suture. A 2.7-mm diameter cystoscope with a sheath was introduced into the bladder lumen. The cystic and urethral calculi were removed under the visual guidance of cystoscopy with continuous fluid flushing. No major postoperative complications were identified. During the follow up period (range 7 to 21 months), no episodes of urinary dysfunction or recurrence of clinical signs were observed.

• Journal of the Korean Chemical Society
• /
• v.47 no.1
• /
• pp.13-18
• /
• 2003

The effect of ultrasonic decomposition was introduced to develop a pretreatment method for the analysis of potassium ion in human urine by potentiometry. N-(4’-benzo-15-crown-5)-anthracene-9-imine, which has a good selectivity coefficient for potassium against ammonium, was used as an ion-selective material for the determination of potassium in urine with relatively high concentration of $NH_4{^+}$. Protenis in urine be removed by 85.1% when the sample acidified with 1.0 M $HNO_3$ was preteated for 100 s by sonication. Potential response of the membrane electrode in the pretreated urine had a slope of 54.6(${\pm}0.2,\;n=5$) mV/decade over the linear range of log $[K^+]$=-5~-1(r=0.9997). When an oxidant, $H_2O_2$, was addwd to the urine sonicated with $HNO_3$, the deproteinization increased 10% more than that in case if only $HNO_3$ and then the maximum ratio of ca. 95% was obtained. Moreover, the Nernstian slope for $K^+$ added to the urinary sample increased to 56.7(${\pm}0.1,\;n=3$) mV/decade. When the calibration curves were measured, the slopes did not vary even after the electrode was successively used 20 times with ultrasonic cleaning. The results showed that an ultrasonic pretreatment method provides simplicity in use, reduced treatment time and improved potentiometric characteristics of the membrane as the method effectively removes ca. 95% of proteins in urine.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.7
• /
• pp.1393-1398
• /
• 2009

Conventionally, etching is first considered for microelectronics fabrication process and is specially important in process of a-Si:H thin film transistor for LCD. In this paper, we stabilize properties of device by development of wet and dry etching process. The a-Si:H TFTs of this paper is inverted staggered type. The gate electrode is lower part. The gate electrode is formed by patterning with length of 8 ${\mu}$m${\sim}$16 ${\mu}$m and width of 80${\sim}$200 ${\mu}$m after depositing with gate electrode (Cr) 1500 ${\AA}$under coming 7059 glass substrate. We have fabricated a-SiN:H, conductor, etch-stopper and photo resistor on gate electrode in sequence, respectively. The thickness of these thin films is formed with a-SiN:H (2000 ${\mu}$m), a-Si:H(2000 ${\mu}$m) and n+a-Si:H (500 ${\mu}$m), We have deposited n-a-Si:H, NPR(Negative Photo Resister) layer after forming pattern of Cr gate electrode by etch-stopper pattern. The NPR layer by inverting pattern of upper gate electrode is patterned and the n+a-Si:H layer is etched by the NPR pattern. The NPR layer is removed. After Cr layer is deposited and patterned, the source-drain electrode is formed. In the fabricated TFT, the most frequent problems are over and under etching in etching process. We were able to improve properties of device by strict criterion on wet, dry etching and cleaning process.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.06b
• /
• pp.221-226
• /
• 2006

This study is about backwash condition and membrane fouling at continuous filtration process in ballast water treatment. Displayed result that handle particle contaminant and hydrospace organism included a number of ballast that is happened in ship using automatic back washing filter. Reason that removes first contaminant that is included in number of ballast is that heighten processing effect of after processing process of the filter. Another advantage is to drop off the solids with controlling revolution of drum screen in pretreatment filtration process. The capacity of pilot plant was $10m^3/h$. The result of the test, Backwash cycle time and duration time and a signification effect on the efficiency of system and backwash Backwash duration time was determined to be fixed in 6 seconds of the system with more than 95% removal rate, It needed 1hour backwash frequency. Filtration system removal aquatic organism over $70{\mu}m$ in ballast water. This study shows that the filtration treatment system has a potential for the treatment of ballast water.

• Journal of Korea Water Resources Association
• /
• v.51 no.10
• /
• pp.917-927
• /
• 2018

Seven heavy metal concentrations (As, Cd, Cr, Cu, Ni, Pb, Zn) were continuously analyzed for twenty rainfall events in 2017~2018 in an urban basin. The overall and dynamic correlations between runoff characteristics and heavy metal concentrations were examined. The peak metal concentration generally appeared in the initial runoff but found to be delayed when the rainfall intensity was low. The rainfall duration had no relationship with either heavy metal concentrations or their total mass. Dynamics of heavy metal mass (load), with the exception of Cu and Zn, showed strong correlation with the 30 minute rainfall intensity (0.60~0.88) and runoff volume (0.74~0.89). While event mean concentration (EMC) showed positive correlation (0.54~0.73) with antecedent dry days (ADD), no significant relationship was found between runoff volume and pollutant concentration. This implies that the pollutants built up on the surface during dry days are washed off even with low rainfall energy. The dynamics of heavy metal and TSS concentrations showed good correlation (0.68~0.87). This result shows that the metals are transported along with solid particles as adsorbate in surface runoff. Regular street sweeping will reduce significant amount of heavy metal loads in urban surface runoff.