• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.2D
• /
• pp.113-118
• /
• 2010

This paper presents an analysis of the instability phenomenon on motorways, with the aim of arriving at the definition of a control strategy suitable for keeping the flow stable. By using some results of the motorway reliability theory, a relationship and some flow characteristics is obtained, which shows that the existence of a reliability threshold critical for flow stability. The macroscopic flow characteristics corresponding to this threshold are very different in different situations, so that this control of flow stability requires the analysis of speed and density microscopic process surveyed on a cross section of the motorway carriage ways to be controlled. A method is presented, based on integrated moving average(IMA) analysis in real time of these processes, by which it is possible to detect the approach of instability before its effects become manifest, and to single out the proper control strategy in different situations.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.6
• /
• pp.77-91
• /
• 2023

Recently, there has been a worldwide increase in research and development on automated vehicles for commercialization. It is expected that the use of level 3 autonomous vehicles on continuous-flow roads will be introduced and will increase. Consequently, various studies have been conducted to investigate the impact of mixed traffic flow with automated vehicles based on the market penetration rate (MPR). However, these studies have been conducted independently, and the results have shown different trends. Therefore, this study attempted a quantitative analysis of the impact of automated vehicles on mixed traffic flow on uninterrupted roads through a meta-analysis. The results showed that the effect size estimated from an MPR of 75% or higher was statistically significant.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.5
• /
• pp.837-844
• /
• 2017

Generally, V/C ratio in uninterrupted traffic flow and average travel speed in interrupted traffic flow are utilized as measure of effect for assessing operational situation of roads. The set of road conditions and traffic conditions are considered to be major variables for assessing operational situation in the traffic flow. However, weather conditions such as rainfall also affect the operational situation of roads. The studies reflected by the rainy situation are conducted in the uninterrupted flow, but the related studies are insufficient in the interrupted flow. In this study, the modification factors during rainfall in the interrupted flow were suggested, and the factors could be used when calculating the average travel speed during rainfall in the interrupted flow. By utilizing the data that were investigated in the same road and traffic conditions and the different weather conditions (rainy day or clear day), the modification factors were founded on regression analysis of the travel speed during rainfall as a dependent variable. Modification factors was suggested in dividing peak time, non-peak time, and whole period. Based on this study, the modification factors can be used to complementing the average travel speed model for assessing the operational situation of urban streets during rainfall.

• Journal of Korean Society of Transportation
• /
• v.19 no.3
• /
• pp.115-131
• /
• 2001

The Purpose of this study is to develop a simulation model for large-scale network with interrupted flow as well as uninterrupted flow. The Cell Transmission(CT) theory is used to simulate traffic flow. Flow transition rules have been newly developed to simulate traffic flows at merging and diverging sections, and signalized intersections. In the model, it is assumed that dynamic OD table is exogenously given. Simulation results for toy network shows that the model can explain queue dynamics not only in signalized intersections of urban arterials, but also in merging and diverging sections of freeway. In case study, the model successfully simulated traffic flows of 145,000 vehicles on CBD network of city of Seoul with 74 traffic zones, 133 signalized intersections among 395 nodes and 1110 links.

• Journal of Korean Society of Transportation
• /
• v.23 no.3 s.81
• /
• pp.137-147
• /
• 2005

This study is to define new road capacity concept, and to develop and propose an estimation method, through the analysis of individual vehicular behaviors in continuum flow. Developments in detection technology enable various and precise traffic data collection. The U.S. HCM (Highway Capacity Manual) method does not require such various and precise traffic data, and outputs only limited results. Alternative capacity concepts, which can be classified into a stochastic model and behavioral or deterministic model, are attempts for modeling some prominent traffic flow features, namely so-called a capacity drop and a traffic hysteresis, using such various and precise traffic data. Yet, no capacity concept up-to-date can describe both features. The analysis of individual vehicular behaviors, including speed-density plot per time lap, traffic flow-speed-density diagram per each sampling interval, time headway distribution, and free flow speed distribution, is performed for overcoming the limits of the previous capacity concepts. A stochastic methods are applied to determine time headway for estimating freeway capacity for traffic control.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.5
• /
• pp.79-90
• /
• 2019

This study aims to develop time headway distribution models of bicycle traffic flow in a uninterrupted bikeway. The sample data were collected and classified into two groups of traffic volume levels. The lower level traffic volume is defined to be under 8 bicycles per minute, and the higher one is greater or equal to 8 bicycles per minute. The data aggregation interval size was set to be 0.5-second. Four distribution models including normal distribution, negative exponential distribution, shifted negative exponential distribution, and Pearson III distribution were tested, and Chi-square test results shows that the negative exponential distribution and the shifted negative exponential distribution are well fitted to the sample data. Another test results with different sample data also shows the same conclusion.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2002.11a
• /
• pp.125-130
• /
• 2002

본 연구는 DEVS를 기반으로 개발된 교통류 시뮬레이션 시스템인 $\ulcorner$I$^3$D$^2$ 교통류 시뮬레이션 시스템$\lrcorner$(이하 I$^3$D$^2$)의 검증을 그 목적으로 한다. I$^3$D$^2$는 본 연구진이 DEVS를 기반으로 개발한 범용 시뮬레이션 도구로써, 이미 서울시 강남 신호교차로와 내부순환로를 대상으로 하여 개발된 내용을 발표한 바 있다. I$^3$D$^2$는 헌재 단속류에서의 최적신호 생성 및 대기행렬 예측 문제, 그리고 연속류 시설의 용량 산정 문제등을 시뮬레이션 할 수 있다. 하지만 아직 문헌자료나 현장 데이터를 토대로 한 충분한 검증이 수행되지 못한 문제가 있다. 따라서 본 연구에서는 문헌자료를 토대로, I$^3$D$^2$를 검증한다. 이를 위하여 고속도로 또는 도시고속도로와 같은 연속 교통류의 대표적인 효과척도인 $\ulcorner$교통량 - 밀도 - 평균주행속도 (시간)$\lrcorner$ 간의 상관관계를 이용하여 미국 HCM과 우리나라의 도로용량편람에 정의되어 있는 기준을 토대로 I$^3$D$^2$ 검증을 수행하였다. 모델링은 서울시 올림픽대로의 양화대교 - 성산대교 - 가양대교 구간을 대상으로 했으며, 검증은 교통량에 따라 크게 3가지 교통류 상태(random, intermediate, constant)를 기준으로 시뮬레이션이 각각의 교통상태에서 예측한 평균주행시간의 정확도를 측정하면서 수행하였다. 검증 결과 random 상태에서는 문헌자료에 부합되는 예측결과를 보여주었으나, intermediate와 constant 상태에서는 문헌보다 다소 낮은 속도를 보여주었다 이러한 속도차는 추후 현장 데이터를 수집하여 보다 실질적인 검증을 통하여 조정되어야 할 것으로 판단된다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.2
• /
• pp.231-238
• /
• 2023

Since there is a limit to the physically visible horizon that sensors for autonomous driving can perceive, complementary utilization of digital map data such as a Local Dynamic Map (LDM) along the probable route of an Autonomous Vehicle (AV) is proposed for safe and efficient driving. Although the amount of digital map data may be insignificant compared to the amount of information collected from the sensors of an AV, efficient management of map data is inevitable for the efficient information processing of AVs. The objective of this study is to analyze the efficiency of information use and information processing time of AV according to the expansion of the active section of LDM-based static road and traffic information. To carry out this objective, a microscopic simulator model, VISSIM and VISSIM COM, was employed, and an area of about 9 km × 13 km was selected in the Busan Metropolitan Area, which includes heterogeneous traffic flows (i.e., uninterrupted and interrupted flows) as well as various road geometries. In addition, the LDM information used in AVs refers to the real high-definition map (HDM) built on the basis of ISO 22726-1. As a result of the analysis, as the electronic horizon area increases, while short links are intensively recognized on interrupted urban roads and the sum of link lengths increases as well, the number of recognized links is relatively small on uninterrupted traffic road but the sum of link lengths is large due to a small number of long links. Therefore, this study showed that an efficient range of electronic horizon for HDM data collection, processing, and management are set as 600 m on interrupted urban roads considering the 12 links corresponding to three downstream intersections and 700 m on uninterrupted traffic road associated with the 10 km sum of link lengths, respectively.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.4
• /
• pp.1-11
• /
• 2014

Traffic congestion cost is more likely to occur in the inner city than interregional road, and it accounts for about 63.39% of the whole. Therefore, it is important to mitigate traffic congestion of the inner city. Traffic congestion in the urban could be divided into Recurrent congestion and Non-recurrent congestion. Quick and accurate detection of Non-recurrent congestion is also important in order to relieve traffic congestion. The existing studies about incident detection have been variously conducted, however it was limited to Uninterrupted Traffic Flow Facilities such as freeway. Moreover study of incident detection on the interrupted Traffic Flow Facilities is still inadequate due to complex geometric structure such as traffic signals and intersections. Therefore, in this study, incident detection model was constructed using by Artificial Neural Network to aim at urban arterial road that is interrupted traffic flow facility. In the result of the reliability assessment, the detection rate were 46.15% and false alarm rate were 25.00%. These results have a meaning as a result of the initial study aimed at interrupted traffic flow. Furthermore, it demonstrates the possibility that Non-recurrent congestion can be detected by using car navigation data such as car navigator system device.

• Journal of Climate Change Research
• /
• v.4 no.4
• /
• pp.359-369
• /
• 2013

In this paper, correlations between driving parameters and $CO_2$ of light-duty vehicles have been analyzed. Three test vehicles equipped with PEMS (Portable Emission Measurement System) have been driven in real-road in urban areas of Seoul. Averaged vehicle speed, RPA(Relative Positive Acceleration) and stop ratio have been selected as main driving parameters. The analysis have been conducted in interrupted and uninterrupted road types. Averaged values in various driving conditions have been calculated with distance based moving averaging window method. The multiple linear regression method have been applied to account for correlation between driving parameters and $CO_2$ emissions. This approach has shown statistically that $CO_2$ emission per distance (g/km) have tendencies to be increased as decreased averaged vehicle speed and increased RPA and stop ratio. Compared with uninterrupted traffic, interrupted traffic have shown the lower vehicle speed and the higher RPA and stop ratio. These characteristics of driving parameters in interrupted traffic should cause the higher $CO_2$ emission per distance.