• Journal of Power System Engineering
• /
• v.15 no.1
• /
• pp.11-17
• /
• 2011

본 연구는 라디칼 착화(Radical Ignition이하 RI) 기술을 적용한 부실직분식 CNG(Compressed Natural Gas) 엔진의 구동특성에 관한 것이다. 실험엔진은 단기통 디젤엔진을 개조하여 사용하였으며, 이는 부실식 디젤엔진처럼 연소실이 주실과 부실로 나누어져 있다. 부실에 분사된 CNG는 스파크플러그로 점화하며, 부실로 부터의 연소가스가 주실 희박 혼합기를 시켜 구동하는 엔진이다. RI 기술은 연소속도를 향상시킬 수 있다. 본 연구는 주로 저부하 RI-CNG 엔진의 성능을 연구하였다. 연료분사기간은 9 ms, 공기과잉률은 1.0, 1.2, 1.4로 하였다. 연료분사시기는 엔진의 배가밸브가 닫히는 ATDC $20^{\circ}CA$ 부터 $120^{\circ}CA$ 사이로, $20^{\circ}CA$ 간격으로 지각시켜 가며 실험하였다. 본 연구는 연료분사시기 및 공기과잉률이 연소최고압력 ($P_{max}$), 연소최고압력시기(${\Theta}_{pmax}$), 도시평균유효압력(IMEP), 사이클 변동계수($COV_{imep}$), 연소속도에 미치는 양향 등을 구하고 분석하였다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.2
• /
• pp.215-222
• /
• 1986

This paper presents the results of investigation, the aim of which was to predict theoretically the processes of thermodynamic cycle of M-combustion chamber type diesel engine. The combustion characteristics in cylinder are evaluated from the energy equation for an thermodynamic system in engine cylinder. In order to predict the combustion pressure in cylinder, the engine is divided in various control volumes. The simulation results of combustion characteristics show that the comparison of computed and measured values brings about the good coincidence.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.25 no.2
• /
• pp.82-86
• /
• 1989

This paper is concerned with the effects of temperature of diesel fuel on combustion characteristics and engine performance in a home-made precombustion diesel engine for small-sized fishing boat. The results may be summarized as follows: 1. The fuel injection timing was delayed with increase in temperature for diesel fuel, and remarkably delayed at low load. 2. The point of maximum pressure was delayed with increase in temperature for diesel fuel, the maximum pressure decreased with increase in temperature for diesel fuel but increased with increase in load. 3. The brake specific fuel comsumption (BSFC) decreased with increase in load, the optimum temperature of the heated fuel was about 15$0^{\circ}C$. 4. The smoke emissions increased with increase in load and temperature for diesel fuel.

• Journal of the korean Society of Automotive Engineers
• /
• v.6 no.4
• /
• pp.18-28
• /
• 1984

디이젤 엔진은 피스톤이 실린더 내를 왕복 운동하면서 압축행정에서 연료의 연소에 의해 발생된 고열을 받아 고온에서 작동되기 때문에 피스톤 헤드에서 받은 열은 속히 아래부분으로 전달시 키고 동시에 실린더 벽으로 전달되게 하여야 한다. 여기서 열이 문제가 되는 요소를 생각해 보면, (1) 고압 : 연소 최고폭발압력이 높기 때문에 압력상승률도 커져 격렬한 연소상태가 된다. (2) 고온 : 격심한 가스 유동과 실린더 직경이 크기 때문에 피스톤 헤드부의 온도가 높아진다. (3) 연소생성물 중에 엔진 및 윤활유에 악 영향을 주는 성분이 많다. (4) 경량, 저가격 구조 때문에 열적 및 역학적 변형이 일어나기 쉽다. (5) 사용조건이 가혹해 연료가 이상 현상을 가져온다. 위의 요소들을 가지고 온도의 분포, 열의 전달과정, 피스톤 냉각 등에 대해서 알아본다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.7 no.3
• /
• pp.8-14
• /
• 2003

A cooling performance analysis has been made in the 8-channel calorimeter based on sub-scale KSR-III engine. Three-dimensional heat transfer analysis in cooling channels has been performed using the heat flux distribution through the chamber wall predicted from axi-symmetric compressible flow inside the combustion chamber. The heat flux distribution is verified against the published literature. Presented for the development and operation of the calorimeter are the coolant pressure drop, coolant temperature rise and the maximum chamber wall temperature. Required coolant flow rate is determined for given chamber pressure. Cooling performance is also predicted for temperature dependant coolant properties.

• Journal of Energy Engineering
• /
• v.11 no.2
• /
• pp.178-185
• /
• 2002

The object of this paper is to investigate the effects of early fuel evaporators on cold driveability of gasoline passenger cars. Experiment has been carried out for the assessment cold start performance and cold driveability. And fuel consumption rate, emission and cylinder pressure were measured. On the base of combustion pressure of cylinder, rate of heat release, cumulative heat release amount and burned mass fraction are evaluated. The results show that fuel consumption rate is increased by 17.7%, monoxide and hydrocarbon were reduced by 23% and by 45% respectively, fluctuations of indicated mean effective pressure and maximum combustion pressure were increased by 4∼6%, fuel consumption rate per power was improved by 0.2∼2.3%. These are caused by the fact maximum heat release period and main combustion period are getting short.

• Journal of the KSME
• /
• v.28 no.5
• /
• pp.469-475
• /
• 1988

연료소비율의 향상은 점차 감소되어 가는 경향에 있다. 그 원인은 3원촉매변환기 채용에 의한 이론공기연료비의 사용, 기관의 연소개선이 발전하여 고압축비화에 의한 연료소비율 향상이 더 이상 어렵게 되었다는 점을 들 수 있다. 한편, 고압축비화의 역효과로는 연소실내 최고압력이 증가하여 각부의 강도나 기관 소음의 문제가 대두된다. 이들 역효과를 타파하여 충분한 연료 소비 향상을 얻을 수 있는 수단이 단기적인 과제가 될 것이다. 전자제어, 희박연소, 마찰저감 등 통상의 엔진의 개량에 대한 노력이 계속될 것이다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.2
• /
• pp.124-131
• /
• 1994

자동차엔진의 연소과정에 상사하는 밀폐정적연소실을 주연소실과 대향 2개 부연소실로 분할하고 오리피스로 연결하였다. 이때 부연소실로부터 주연소실로 분출하는 대향분출염 연소에 의한 질소산화물 배출저감특성을 연소방식, 연소실형상 그리고 연료종류를 변경한 수종의 실험으로 조사하였다. 질소산화물농도, 연소실 최고압력, 화염전파과정의 고속도슐리렌사진 가시화를 수행한 결과, 대향분출염 연소방식을 도입하연 연소실의 중앙부공간이 상대적으로 넓은 경우에 고부하운전과 동시에 질소산화물의 배출량도 저감할 수 있었다. 그러나 연료의 종류는 질소산화물생성에 매우 영향이 적었다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.1
• /
• pp.89-96
• /
• 2013

Combustion pressures were measured to study combustion stability for an oxygen rich preburner by both of static and dynamic pressure sensors. The resolutions of each static and dynamic pressure sensor are the 1,000 Hz and 25,600 Hz, respectively. The nominal combustion pressure of the preburner was 200 bar but 80 bar was used at the several initial tests for the safety reason. Two stage ignition was applied to reduce the ignition impact for every tests including the tests with 200 bar combustion pressure. The tests lasted for 10 sec. max. and a little fluctuations of pressure was observed during the main mode. The measured pressures were studied by FFT analysis and no noticeable frequency coupling was found. Thus the preburner can be regarded as stable and it can be utilized for further study on staged combustion cycle liquid rocket engine.

• Fire Science and Engineering
• /
• v.33 no.5
• /
• pp.48-54
• /
• 2019

A Large Eddy Simulation (LES), adopting the Eddy Dissipation Concept (EDC) 1-step model, was successfully performed for backdraft phenomena. The activation energy of the finite chemistry reaction in the EDC 1-step model was adjusted to simulate the backdraft. The prediction of the EDC 1-step model was similar to that of the Mixing-Controlled Fast Chemistry (MCFC) model, except when the backdraft occurred. The EDC 1-step model could be used to simulate the experimental peak pressure, but not the first peak pressure of the backdraft.