• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.7
• /
• pp.731-738
• /
• 2012

In this study, the evaluation of the aerodynamic characteristics of the NREL Phase VI Rotor System has been performed, for the 7 m/s upwind case using commercial FEA and CFD tools which are ANSYS Mechanical 12.1 and CFX 12.1. The initial operating conditions of the rotor blade include a $3^{\circ}$ tip pitch angle. A numerical simulation was carried out on only the rotor parts, excluding the tower structure based on the equivalent stiffness model, to consider the aeroelastic effect for the numerical simulation using the loosely coupled 2-way fluid-structure interaction method. The blade root bending moment was monitored in real time to obtain reasonable results. To verify the analysis results, the numerical simulation results were compared with the measurements in the form of the root bending moment and the pressure distributions of the NREL/NASA Ames wind tunnel test.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.4D
• /
• pp.565-569
• /
• 2011

This paper presents minimum area repair method that is one of the preventive maintenance techniques in asphalt concrete pavements. In this method, a 70cm-width as an effective repair zone was suggested considering the conventional longitudinal damages (rutting and fatigue cracking) in early stages. In addition, the repair zone can be readjusted according to the pavement damage levels. A field test bed was constructed to verify the adaptness for the repair method. Test results revealed that the minimum area repair method can be adopted as a preventive maintenance technique in flexible pavements to recover an appropriate serviceability level. The preventive maintenance method may be one of the major maintenance methods of flexible pavements with an appropriate application. It is also noted that the method may be a long term maintenance cost effective and pavement life ensuring one.

• Journal of the Korean Geographical Society
• /
• v.43 no.6
• /
• pp.873-893
• /
• 2008

This article focuses on reviewing place branding theories as a major toolkit of 'soft regional development'. Place branding provides sophisticate methodologies to strengthen city and regional image and identity. For effective place marketing practices, four of useful place branding tools are suggested. They include the methodology of place identity development, brand leadership system in local governance, construction of city brand architecture, and evaluation model for city brand equity. A process model is suggested for systematically organizing the diverse tools of place marketing and branding. The model is expected to be used as a framework of strategical soft regional development and planning. The place branding process model is to be an important theoretical and methodological basement of postmodern urban and regional development on which creativity, symbol and signs are more emphasized. More in-depth theoretical and empirical studies are needed. Geographical tradition and knowledge can play important roles in this inter-disciplinary process.

• Computational Structural Engineering
• /
• v.26 no.2
• /
• pp.37-42
• /
• 2013

준공 후 상당한 시간이 지나 내진설계가 되지 않았거나 내진상세가 이루어지지 않은 건물의 부족한 내진성능을 보완하기 위한 방법의 하나로 좌굴이 제한된 가새형 댐퍼를 적용할 수 있다. 이 방법을 적용할 경우, 기존 내진보강법의 불확실성을 줄일 수 있었음에도 불구하고, 댐퍼의 설계과정이 복잡하여 실무에 적용하기 어려웠다. 그러나 본 원고에서는 강성과 강도개념을 적용한 댐퍼의 설계법을 적용함으로써, 실무에서 쉽게 적용할 수 있도록 하였다. 준공된 지 16년이 지난 비틀림 비정형 건물에 대한 내진성능을 평가한 후, 가새형 댐퍼로 보강한 결과는 다음과 같다. (1) 일방향해석결과 나타난 골조별 하중-지붕변위의 관계를 이용하여, 연약골조의 강성을 강한 골조의 강성과 일치시키고, 이 강성비로부터 댐퍼가 부담하는 최적의 내력비율을 정하여 내진보강을 수행한 결과, 가새를 설치한 방향으로는 가새형댐퍼가 비틀림 방지와 연성증대효과를 구조물에 부여하여 성능이 획기적으로 증가하였다. 또한, 그 가새의 직각방향 하중에 대해서도 가새를 설치함으로써 비틀림 강성이 증가하고, 가새와 코어벽체가 인장과 압축으로 횡력에 저항하여 횡저항 성능이 증가하였다. (2) 내진성능이 부족한 비틀림 비정형 건물의 내진성능을 증진시키기 위해 가새형 댐퍼를 적용함에 있어, 댐퍼의 강성을 이용하여 구조체의 비틀림 거동을 최소화하고, 연성을 증진시키는 방법을 체택할 경우, 실무자들이 보다 쉽게 적용할 수 있으면서 그 효과도 상당히 클 것으로 기대된다.

• Magazine of the Korea Concrete Institute
• /
• v.3 no.3
• /
• pp.129-139
• /
• 1991

The mechanical hehavior of relIlforced concrete beams with steel fibers is investigated 111 the present study. An expenmental program was set up and several series of rem forced concrete beams have been tested, including two senes of singly-reinforced concrete beams and one senes of doubly-reinforced concrete beams. It was found from th, :se measurements that the crack widths lIlcrease almost llIlearly With the lIlcrease of steel stress and that the crack Widths at the same loadlJ1g stages are greatly reduced as the contents of steel fibers increase. The present study also IJ1chcates that the ductiiIty and the ultJmate resistance are remarkably enhanced due to the addition of steel fibers. A theoretical mex1e1 for the flexural analysis of fiber-reinforced concrete beam which takes into account the effects of fibers JS also proposed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.1 s.173
• /
• pp.250-258
• /
• 2000

The reinforcing effects of ductile short-fiber reinforced brittle matrix composites are studied by, measuring flexural strength, fracture toughness and impact energy as functions of fiber volume fraction and length. The parameters of fracture mechanics, K and J are applied to assess fracture toughness and bridging stress. It is found that fracture toughness is greatly, influenced by the bridging stress ill which fiber pull-out is occur. For the reinforcing effects as functions of fiber volume fraction($V_f$ = 1, 2, 3 %) and length(L = 3, 6. 10cm), the flexural strength is maximum at $V_f$ = 1% and both fracture toughness.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.10a
• /
• pp.112-116
• /
• 2003

This paper describes the need for a ductile of Fiber Reinforced Plastic(FRP) reinforcement for concrete structures. The criteria to be met by the FRP, which are based on the properties of the steel rebar it is to replace, are threefold: high initial modulus, a definite yield point and a high level of ultimate strain. It is shown that the use of a fiber architecture based design methodology facilitates the optimization of the performance of FRP through material and geometric hybrid. Ductile hybrid FRP bars were successfully fabricated at 3mm and 5mm nominal diameters using an in-line braiding and pultrusion process.

• Journal of Ocean Engineering and Technology
• /
• v.10 no.3
• /
• pp.74-82
• /
• 1996

수면상에 떠있는 2차원 물체에 작용하는 시간평균 표류력 및 표류모오멘트를 비점성 선형 포텐셜 이론을 사용하여 계산하는 방법에 대하여 검토하였다. 부유체 접수면상의 압력을 직접적분하여 구한 수평방향 표류력이 특정주파수 부근에서 음의 값을 보이고 있다. 이는 무한원방에서의 에너지 보전방법에 의한 표류력이 항상 양의 값을 취한다는 기존 이론과 상이하다. 본 논문에서, 이러한 차이가 부유체의 횡요 및 상하동요에 기인한 복원력의 성분과 횡요와의 연성효과에 의하여 발생하였음을 규명하였다. 이는 횡요가 있는 경우, 표류력을 산출하는 기존의 무한원방 방법에 결함이 있음을 보이고 있다. 이에 반하여 기존의 접수면압력 직접적방법은 부유체에 작용하는 시간평균 표류력 및 표류모오멘트를 모든 주파수에 대하여 정확하게 산출한다고 결론지울 수 있다.

• Journal of Korea Foundry Society
• /
• v.15 no.6
• /
• pp.596-603
• /
• 1995

${\gamma}-TiAl$ 금속간화합물에 크롬과 질소첨가의 영향을 관찰하기 위하여 첨가량에 따른 열처리 전후의 미세조직과 기계적 성질을 비교 분석하였다. 그 결과 질소첨가량이 증가할수록 결정립이 미세화되고 항복강도가 증가되었으며 크롬과 질소의 동시첨가의 경우가 이들의 효과가 현저하였다. 또한 이들 원소의 첨가로 $Ti_2AlN$이 제3상으로 생성되어 열처리시 ${\alpha}_2/{\gamma}$층상조직의 안정화를 보였으며 첨가량을 다량으로 하였을 때 결정립의 크기가 급격히 감소함에도 상온연성이 감소되는 것은 $Ti_2AlN$의 크기에 기인한 것으로 판단된다. 적정량의 크롬과 질소를 동시첨가하여 열처리시 상온연성 및 항복강도가 향상되었다.

• Journal of Power System Engineering
• /
• v.3 no.3
• /
• pp.76-82
• /
• 1999

This study presents a methodology to predict the hardenability of quenched carbon steels. The equation of transient heat conduction is analyzed to formulate a cooling curve by a finite element method which incorperates coupled effects of temperature on physical properties, the metallic structures and also the latent heat by phase transformation. The volume traction of martensite and pearlite are the structural analysis for hardenability analysis. In order to demonstrate the feasibility of adopting a full quench model respectively. This procedure could be used as the database for optimal condition of heat treatment processes.